HP Pav Dv7-1210ea black screen

Similar Questions

• Envy dv7-7202tx black screen at shutdown (inside information)

  When you hear "black screen at shutdown", you might think I'm trolling, but I'm not. What I'm talking about, it is that when I try to close my laptop, it actually not-.-it will freeze on a black screen while the laptop is still on (fan is still underway off the coast), the only way to close it in fact at this State is through hard reset (holding the power button).

  Here is some info on my laptop:

  -BIOS: Insyde F. 24 01/22/13

  -OS: Version W8 6.2.9200 build 9200

  IDK nothing else to put here.

  Also, when I just leave this State (black screen), like 5 hours later, it will reboot itself it will appear and info message saying "PC has encountered an error blah blah blah, it was restarted to prevent something."

  Help please. I don't want to keep hard reset my phone, it's dangerous for his health.

  LouieBot,

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• HP DV7 - 3164cl Black screen at startup

  I have a HP laptop dv7 - 3164cl entertainment who has had problems for several months with closure. It's not often, so I have to press the power button. From the start, I leave starts in normal mode. It worked a few days previously, and now when I turn on the computer to start, I get only a screen empty. My light lights up (they do not Flash) but my screen just stays black. I tried a hard reboot... Remove the battery, holding down the power button down for 30 seconds, replace battery. I tried to hit the fn button 5, the fn button 8, esc. None of the above worked. Any ideas on how I can fix this? Thank you!!

  If heat / really noticeable noise for a while, you get it at a service tech for a few checks (probably for a cleaning of cooler-fan)

  computers take damage from the heat over time and this damage don't dissipate

  He can continue to work for a while, but will be worse later if this is the case

  You can completely lose

• Black screen on Hp Pavilion dv7 Notebook

  I had my Hp dv7 notebook for a few months now and have had no problems. But all of a sudden, I turn on the computer and see nothng but a white, black screen. I don't know if I changed the display settings or what, but I do not see anything. I know that the computer is running because the fan starts and the lights on the keyboard are working. When I connect my laptop to an external monitor, I was able to find that my computer was on and fully functional. In fact, I use it now on an external monitor to type this message.

  I was wondering if I made a stupid mistake, or if it's something serious, please help ASAP

  Thanks, Mike

  Hi Mike,.

  If you press f4 you see a menu on the screen with the options ' computer only; Two copies; Extend; Projector only "?"  If you do this, use the arrow keys to select duplicate , then press ENTER.

  Now nothing shows on your laptop screen?

  Let me know before going any further.

  Kind regards

  DP - K

• F12 wifi on Hp Pavilion dv7-6c64nr entertainment pc to Flash 3 times, black screen, caps lock

  HP pavilion dv7-6c64nr Entertainment PC
  Core i7
  Windows7

  After I turn on its a black screen, caps lock flashes 3times, function f12 key wifi signal. But the machine still works (I can hear the sound).

  Appreciated if someone could help. Thanks in advance

  Hello

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference try the following.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed from Page 63 of your & Maintenance Guide.

  Kind regards

  DP - K

• Flashing LED and black screen HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  Processor i5

  4 GB OF RAM

  NVIDIA Geforce 2 GB VGA

  OS: WIndows 7 64 - bit

  I have a BLACK SCREEN (NOT SURE if IT REALLY TURNS ON or not) once I turn it on. The NUMBER of CAPS & LOCK lights flash three times with three second window and automatically shutsdown and turns on automatically. The LEDs blink with three seconds apart, keeping the machine on constantly.

  After checking according to this link

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01732674&product=1132551

  Checked

  Adapter CA / CC -works great

  BATTERY - does not load

  IT worked well had no warning on the battery (after a few days after the above mentioned problem I realized the battery does not charge)

  Interpreted Power Reset

  RAM (Memmory modules) -replaced New One (4 GB)

  It is based on the sequence of flashing of LED Memmory module errors. Reseating the modules memmory (2 GB + 2 GB) doesn't seem to work so I replaced it with a new (4 GB).

  I hope that this has nothing to do with the battery. This does not solve the problem.

  Appreciated if someone could help. Thanks in advance

  Hello

  Unfortunately the "blink" codes are not always an accurate indication of the actual error, so this may be one hardware failure of another component on the motherboard.

  Try the following.

  Shut down the laptop, unplug the AC adapter and remove the battery.  Follow the procedure begins on Page 52 of your Interview Guide & Service to remove the battery from the RTC.

  Press and hold power for 30 seconds and then leave the laptop for 15 minutes.

  Exchange your module memory 4 GB in the other available slot.  Reinsert the RTC battery, replace the cover, plug the power adapter ( Let the main battery at the moment ) and try to start the laptop.

  Any change?

  Kind regards

  DP - K

• Black screen HP Pavilion dv7-4060us

  I have a HP Pavilion dv7-4060us is about 3-1/2 years. I have a black screen and it now won't start at all. He has also been more recent times of heating. I took it to a local repair guy and he said I need a new motherboard to a height of $200. It is better to fix it or should I get a second opinion?

  200 is pretty cheap for a laptop in my opinion motherboard replacement, only you can determine if it is worth it or not.

  How long the shop is guaranteed the motherboard, what they will install?

  Most likely, it is a motherboard used, ask them.

• BIOS update remote pavalion black screen dv7 2230ek help please

  I have a computer pc laptop dv7 2230ek pavalion I was last updated in the bios but the update did not and I remove the AC adapter and when im gone start laptopt it was a black screen of the bios and the recovery did not work for me please help
  my windows is win 8

  Hey bro look to this video
  https://www.YouTube.com/watch?v=seKTSo_UaWk
  but I put t know do that please help

• envy dv7: black screen

  Hello, I have a problem with my laptop... after I did a system restore, rebooted computer, but windows does not start one can not access the bios either... when I press the power button / the hp logo comes up for a few seconds and after that I see is black screen and mouse... I can move the mouse the key combination does not work, but I can turn on caps lock... the fan is workink no beep no no hot flashes... I have no idea what could be the problem... What worries me the most, is that I can't access the bios... Thank you for your help

  Thank you for your help, but fortunately I've already solved the problem...

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10

• Black screen during games out and in minimizing

  Prouct name and number:

  HP Pavilion dv7 Notebook PC LZ667EA #ABU

  Operating system:

  Windows 7 64 bit

  Changes to the system:

  Router has changed twice but not recently

  The computer is 18 months old and can handle basic tasks to a reasonable level (slow down if two many windows are open at the same time, but maybe it's just my slow internet speed). I have download games through Steam from Valve service and do since almost a year now. So far, games have managed very well, and even though I have your chart down parameters, but they are playable.

  But now, every time I minimize or close a game, the computer runs for a few seconds and then shows me a white screen. The power light flashes and I can hear a high-pitched sound of the box on the charger cable. At the beginning I didn't see this as a problem because it only lasted about ten seconds each time and was taken to the 'locked user' screen where I could log in and continue.

  Now the black screen can display up to five minutes in a period which can be really frustrating. The strange thing is that I can play for hours at a time without what is happening but as soon as I close or minimize the game it happens. This can happen even if the game has only run for a few seconds or so and I close it.

  I don't know if it is overheating, but if I could get advice it certainly helps. Thank you!

  I was going to follow the procedure that you listed, but I found a solution to the problem. As there was light the AC adapter noise when the screen went black, I decided to replace the AC adapter with an old I use from another computer. It works fine now.

  Sorry for any inconvinience caused.

• black screen with no cursor or available bios

  I have a HP Pavilion dv7 laptop, which seems to agree, but has a black screen with no cursor.  The fan runs for a few seconds and flashing lights show near the top right the keyboad and cap lock button.  I pulled the hard drive and tested ok and tried to move the memory with no luck.  I also tried the trick to reset by turning off the power switch for a minute.  I searched this forum and anywhere on the internet that I could find, and all I could gather was that it is not uncommon, but no one seemed to have an answer.   The cmos battery cause this?  I always have one battery to verify, but it's a different style and I have to order a.  This computer is about two years old and with Vista.

  Never mind! Looks like you got.

• I received a message stating that resources were low. Computer has crashed and when I turned on the computer had black screen

  Original title: drive full D... computer laptop unusable

  I have a HP Pavilion dv7 laptop... computer.  Two months ago I saved mistakedly C drive to D drive.  I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK.  Has nothing on this subject.  Yesterday, I received a message stating that resources were low.  Computer has crashed just after that.  The computer turns on with only a black screen.  Pressing F8 does not start in safe mode as it does on my PC.  Can someone help me?  Thank you!

  Hi SteveKinney,

  ·         What version of Windows is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: See the following articles and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  See also the article mentioned for more information:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor.  About $200.

• SP2 install correctly black screens-error enigmatic messages-MSDSM driver incompatibility-loss of restore MICROSOFT DIFFICULTY points please!

  I tried to install the important update of Vista SP2 on my HP dv7 64 bit computer.  The last Windows Update (Service Pack 2) gave me a warning that the 'MSDSM' driver is incompatible with the Service Pack.  He offered no solution or the identification of what is MSDSM.  Stupidly, I chose the option to continue installation of update anyway.  After downloading the update and then attempt the required reboot, the computer got through the Installation step 1 of 3.  Towards the beginning of phase 2, the computer has restarted, then moved to a black screen with a message to BACK an evolution line pretending to scan files.  He rose to a file number 3592 for ~ 75000 and wouldn't go any further, just kept flashing the same file name and number (with exclamation points!).  Finally, I held the power to close and restart manually button.  The system repair program began and eventually offered a system restore. I chose the system restore and it restored successfully.  I checked to see what restore point it had restored to and noticed that all my points of restoration (with the exception of the installation of SP2) had disappeared.  I also had an error message for Norton Internet Security 2009 indicating that antivirus programs have closed and had to run Live Update.  Surprisingly, it is 75Mo of updates even if I had been fully updated before installing SP2.  Thank you Microsoft for unwanted "improvement" which causes much more problems than it solves.  I highly recommend that anyone install SP2 unless and until MS comes up.

  Check that, for those whose systems are still alive:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9/#c640e38e-F061-4552-B741-97c3b19ba615