HP Pavilion 17z - f100 CTO: Dragon-fur

Similar Questions

• Pavilion 17z-F200 CTO: How do I change turn on the num lock (NumLock) key have a State by default to it?

  How do I change turn the num lock (NumLock) key a Pavilion 17z-F200 CTO to have a State default one?

  System BIOS has no setting for it. By another post, I tried to set the value of register in HKEY_USERS\. Default\Control Panel\Keyboard for "InitialKeyboardIndicators" of "2147483648" to "2147483650. It seems not to change after a reboot.

  Yes, the BIOS settings was the first thing I checked. But BIOS seems to only contain States in order for the locks of keys on the new HP Pavilion or Envy laptop.

  I did more research and found more credible sources to TechNet asking to change the same registry value to 2. I tried it and it works a fact/do.

• Pavilion 17z-e100 CTO Notebook: device drivers

  Cannot get my card reader to work since I reinstalled Windows 8.1. And there are 3 other devices in Device Manager that has a yellow! in front of it.

  Device PCI, PCI\VEN_10EC & DEV_5229 & SUBSYS_213C103C & REV_01\4 & 110ac11b & 0 & 0012, ACPI\VEN_HPQ & DEV_6007, ACPI\HPQ6007, * HPQ6007

  Ralink_RT3290_Bluetooth_01, USB\VID_148F & PID_3298 & REV_0000\5 & ba7d1e8 & 0 & 01, ACPI\VEN_HPQ & DEV_6007, ACPI\HPQ6007, * HPQ6007

  Unknown Device, device ACPI\ASD0001\2 & daba3ff & 2, ACPI\VEN_HPQ & DEV_6007, ACPI\HPQ6007, * HPQ6007

  Unknown device, device ACPI\HPQ6007\3 & 2411e6fe & 0, ACPI\VEN_HPQ & DEV_6007, ACPI\HPQ6007, * HPQ6007

  Another problem I have is that none of my other computers on my home network cannot read my D: drive.

  What I did was put in a SSD as C:, bought a caddy HHD & put the HHD which was C: in the caddy. The cd player out & put the HHD to this place. Other computers can see D:. D: is shared w/full rights.

  Any help would be appreciated & thanks.

  You are the very welcome.

  They were on the support page for your model, so they are not hidden.

  You just know what drivers to install devices.

  I do not think that HP has any software to monitor time CPU.

  I recommend to start a new post. Maybe in the laptop hardware section.

• Opening of the Pavilion 17z-e100

  Hi all

  I help my parents with their new laptop, a Pavilion 17z-e100 CTO. I searched here and everywhere else online for instructions on how to open the bottom panel access the disk hard/RAM/etc, but all I've found is for older models that do not work in my case.

  I'm usually pretty good art to find this kind of things out, but since it's new, I'll be sure and ask around before you start to tinker. There is an obvious screws under the battery, but this deletion is not enough for me to take down the sign. Anyone know what I'm missing? There are a few teeny tiny screws in the battery bay as well, but they seem not at all related to this Panel. Thanks in advance!

  Thanks for the reply! You are partially right...

  The screw that I mentioned is the only one keeping the Panel in place. Once the screws removed the Panel Slides down (front of the laptop) and then comes off easily. I tried to force upwards, but nothing loving or move. I can't believe that I didn't understand this earlier. I'm so accustomed to these panels lifting directly, but I like this design a lot more.

  I hope that this information will help others with the same question!

• How do you install memory in Pavilion 17z-F200 (part L2H13AV)

  How do you install memory in Pavilion 17z-F200 (part L2H13AV)?

  HP seems to have no guide available for this model maintenance. What is happening with this?

  I took one the Pavilion 17z-F100 (sent by mistake). There not all removable panels on the underside. And the User Guide for 17z-F200 indicates that it will be the same (assuming that ever happens).

  I'll probably have to remove the outer shell together to install the memory (or replace the hard drive, when the time comes). But, any laptop I worked on in the past had its own special place for screws hidden or something special to that of disassembly. So having an interview guide is a necessity to prevent the pests from plastic, clips, guides, mounts etc..

  Solved by Hüffer here: http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/How-do-I-install-memory-into-the-Pavilion-17z-F2-series/m-p/4836092#M49546

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP Pavilion Elite e9180t CTO D: Will Graphics card work with my desktop computer

  I have a HP Pavilion Elite e9180t CTO Desktop PC - AV321AV-ABA e9180t

  Windows 7 Ultimate 64-bit Service Pack 1

  Intel Core i7 CPU 975 3.33 GHz

  ATI Radeon HD 4850

  Motherboard: TRUCKEE 1.04

  System BIOS: 5.29

  To activate the ray-tracing on the GPU, Adobe After Effects requires a graphics NVIDIA and CUDA 5.0 or later approved.

  An NVIDIA representative recommended a GEFORCE GTX 780.  The PNY Graphics Card VCGGTX7803XPB video will work with my desk?

  Hi there @LeoOfMars
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking to find out if a video card is compatible with your information system. I'm happy to help you with that.

  The main reasons to be sure of are normally feeding you, special (to THE) cable power supply for the graphics card, on the motherboard compatible expansion slot, the drivers for your operating system, another thing to know is the physical size of the map, for moments of cases.

  Looking at the specs of your system and the motherboard by default, I listed the type of slot of power and expansion.

  HP Pavilion Elite e9180t Desktop PC product specifications and configurable Options

  Output power of power: 460 Watt

  HP and Compaq desktop PC - specifications of the motherboard, IPMTB-TK (Truckee)

  Two graphics PCI Express 2.0 x 16 (for graphics cards)

  Go to the video card you are looking at:

  GTX 780 3072 MB GDDR5 PCI-E 3.0 OC Custom cooled graphics card

  Input power: 1 x 8-pin auxiliary input aux input 1 x 6-pin
  Bus type: PCI-Express 3.0 16 x
  
  System requirements:
  Mother compatible PCI Express with a slot of chart double-width x 16
  Power 600W minimum (with a minimum of 12V current rating of 42A) 3
  300 MB of available disk space
  2 GB of memory system (4 GB or more recommended)
  Microsoft Windows 8, Windows 7, Windows Vista, or Windows XP Operating System (32 or 64-bit)
  DVD-ROM drive or Internet connection for installation
  DVI, HDMI, DisplayPort or VGA compatible monitor

  So on a quick inspection of both devices there are three problems, so this card will not work on your motherboard or with the current power.

  I hope this helps.

  1 x 8 pins, entry to aux in, 1 x 6-pin

• Upgrade memory of HP Pavilion Dv5t-1100 CTO Question

  Hello world:
  
  I own a laptop HP Pavilion DV5t-1100 CTO Notbook of customizable entertainment... Model number: FL773AV and CNF8471PML series number. My OS changed to Windows 7 Professional. My number of parts of current memory cards are 48468-001, 2 GB, 800 MHz, 200 pins, PC2-6400, SDRAM Small outline Dual In-line Memory module (SODIMM).
  
  I run Windows Virtual PC to Win XP, motivated by the need to use some old software professional quality for economic reasons (AutoCad, etc.). I am a small business owner that gifted throughout the day. I need 8 GB of ram to make sure that I won't run into snags of lack of memory and to keep my laptop works well.
  
  Question: My motherboard is configured for except the upgrade to 8 GB? HP parts list does not list the card 4 GB or 8GBkit for this laptop model. Please notify.
  Thank you
  n

  I see not the Patriot memory on cheeper $40.00 then the Crucial. I really thank you once again... I need this laptop to keep in top condition for business and personal use. You gave a great piece of mind.
  
  Thanks again Paul.
  n

• HP Pavilion g6t-2000 CTO Notebook PC reclassification of i3 to i7

  Hello, I have a HP Pavilion g6t-2000 CTO Notebook PC with processor i3 - 2370M Intel (r) Core I want to upgrade to an i7.  Is this possible?  And if so, what processor do I get?  Thanks for any info in advance.

  Hi EHolmes:

  Thank you for your query... I'm please to provide this information.

  I'll send you a link to the Maintenance and Service Guide click here. If you click on the product description, left, under processors. on the right is a list of a compatible for your device.

  To answer your question directly, not an I7 is not compatible.

• Example: Pavilion dv7t-4100: recovery of hp pavilion dv7t-4100 cto

  Hey CV, where I can find or buy a software recovery and restore for my hp pavilion dv7t-4100 cto or is there any software available to download here restoration and recovery. ? Thank you...

  from the Philippines.

  NeoJohn wrote:
  

  Can I ask you... this disk of software can perform a full recovery of the system... ?

  Recovery Kit for Windows 7 64 b 631032-001 for HP Pavilion Entertainment PC portable model number dv7t-4100
  Operating system: Windows 7 64B + extra 2
  Number of disks: 2 DVD + 1 additional disk

  Did you ask them? Which looks like this but if you do not ask to be sure so we on the user forum can do for you.

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• 2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - what do I need?

  Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (product # WV703AV). It can accommodate two hard disks but only came with one. What would need to be able to install the second hard drive? I need just a connecting cable or I also need to caddy or kit?

  Also, would I get a solid state? My laptop that would support or should I just use regular?

  Currently, I am on Windows 7 64-bit. I have a 500 GB hd (which came to be partitioned with hp tools/restoration).

  Help with what I would need to a conventional hard drive or ssd would be greatly appreciated. I tried to look through messages of others first, but could not find anything specific to my model. Thanks for your time!

  Hello:

  The only place I know where you can get a 2nd hard drive kit is that provider.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  Your laptop should be able to work with an SSD, but I can't guarantee it.

  I don't really see any point in adding an SSD unless you make the main hard drive, and to do this, you must get an SSD of the same size as the original 500 GB hard drive to use the recovery discs to reinstall the operating system.

  Most people get smaller SSD and they use the W7 product key to activate a simple installation of W7.

  If you can read all 25 characters of your product key for windows 7, you can do your own installation media and allows to install Windows on a smaller than 500 GB SSD.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

• Pavilion 17z: death error screen

  Sorry if I put this in the wrong category, but it's the third time, I get this message on my computuer:

  

  I got this message about three times during the past two weeks. What happens is that I will work on my computer, and it appears on the entire screen. My pc will then restart. Once closed everything. These two days, it went completely black and then go back to what it was - none of my windows closed.

  Can someone help me?

  The error indicates the image is SYSTEM THREAD EXCEPTION NOT HANDLED (atikmdag.sys)

  Hi @Tsukimi,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion 17z Notebook and system unhandled thread exception. This is usually cause by drivers that need to be updated.

  You can simply run the HP Support Assistant, and it will help with the software and drivers on your system.

  If this is not enough, I would like to reset the BIOS withthis document by selecting the reload the default BIOS settings. Helping other people.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. I recommend at least 3 weeks to make sure that you reset the question.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  I hope this helps.

  Thank you.

• Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

  I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

  REO51ST

  is older than me - the site is always down.

  fishcrazy13

  Here is a workaround:

  Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

  It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

  I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade processor

  Hello

  Any help would be appreciated.

  I have a HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Due to a new job, I need to update my processor of the current 2.30 GHz (see exact specifications below, please) of at least 3.0 GHz.

  Is there a processor 3.0 GHz there that is compatible with this particular computer? I called tech support and they told me they don't know. I don't know who else to ask.

  This computer was purchased just a few months ago (before I got the new job). I really don't buy a new computer, if possible, if I can upgrade the processor in it.

  Here are the current processor specifications:

  Intel Core i7 3610QM
  Codename Ivy Bridge
  RPGA Socket 988 B package
  The 22nm technology
  Specification Intel Core i7-3610QM CPU @ 2.30 GHz

  Thanks in advance.

  Well, it seems that one (that I found) 3.0 GHz processor that Intel made for my chipset (HM77 Express Chipset) and it's the Extreme edition i7-3940XM (http://ark.intel.com/products/71096/)

  Priced at $1,000 +, it looks like I'll be shopping for a new computer.

  Don't know if anyone from HP read the peer forums, however, I won't buy another HP product.

  This machine had problems outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lack in all areas even pull your techscannot model with the serial number.

  Visitors should not go out on the Internet for questions of research like this.