Pavilion 500-413nl: which download to choose?

Similar Questions

• HP Pavilion 500-141ea: which recommended update BIOS to use?

  I have desktop PC HP Pavilion 500-141ea, bought 2014.03.27 not produce. D7D35EA #ABU.

  Manu of motherboard: MSI, model: 2AE0 (P0). Current BIOS is what FRIEND 80.35 dated the 2013.07.10

  Win 10 (64-bit)

  Online support suggests that this office should be updated to versions...

  (1) update BIOS of desktop PC for the consumer HP Rev.A 80.52 (SSID family ROM 2AE0) 5.1 MB 12 November 2015

  (2) HP Desktop system BIOS Update for the models of PC PC 2013 HP Pavilion 500 - axx (with a ROMA 2AE0 family) 80,51 Rev.A 2.9 MB November 4, 2015

  How will I know that I should use?

  Greetings,

  80.52 is the last and will include the previous update revisions.

  Download the update manually. Do not use the HPSA.

  See you soon!

• 500-154ea Pavilion: Beats Audio for Pavilion 500-154ea software download

  Hello.

  I just had a new hard drive mounted as he failed a few months warranty on this desktop computer.

  The tech guy did a decent job of replacing the drive and re-loading 8.1 of Windows and other software of database back on and I have topped up all our files OK... but the Beats Audio software is missing. Mine was the guy with the graphic equalizer and configuration 7.1 etc so you can balance the speakers and void / etc.

  The sound works, but he obviously used a pilot of its channel low spec 2 generic no more volume set.

  I see not the software beats download on my desktop model-specific HP page and I was wondering if there was a generic download I could use?

  Also, I have seen on this forum links to other desktops download beats, but assumed that it might be the specific model?

  Any advice or links appreciated.

  Hello

  Try the following.

  As before, uninstall the current IDT HD audio software since its entry into programs and features and then reboot the PC.

  Then download the software package following IDT HD and Save in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58818.exe

  Then, if you do not have an extraction utility installed, download and install the Installer x 64 64-bit .msi for 7 - Zip at the link below.

  http://www.7-zip.org/

  One when you're done, open your downloads folder, right-click on the setup of the IDT HD software, select 7 - Zip, select extract files and then click Ok.  Open the newly extracted folder ( sp58818 ), open src, navigate to setup.exe (size 368ko), right click and select "Run as Administrator" to launch the installation.

  If this is successful, restart the PC.

  No sign of "beats".

  Kind regards

  DP - K

• Turn on two HP Pavilion 500-319na DVI ports

  I just bought a HP Pavilion 500-319na which has been described as having 1 x HDMI, 2 x DVI video interfaces.

  The GeForce GT 705 nvidia graphics card has 1 x HDMI, 1 x DVI taken

  The motherboard has also 1 x taken DVI which was capped with a small piece of plastic with "do not remove" on the subject.

  After advice from PC World, I removed the plastic and tried the DVI socket mother who did not work.

  Is there a way of making the motherboard DVI to work in parallel with sockets of graphics cards.

  Finally, I would like to run two monitors from the DVI Sockets at the same time and have the HDMI enabled.

  This is my first Post ever anywhere so apologies if there is not enough information.

  See you soon

  RSPII

  Please provide the full brand and model, for both monitors information, you try to connect to your computer.

  Based on the specifications of your desktop HP Pavilion 500-319na, this model has a VGA port (analog only) integrated and an integrated port DVI - D (digital only) as shown below (please NOTE: embedded video is not available if a graphics card is installed);

  

  #4-VGA (analog only) # 5 - DVI - D (digital only)

  Please replace the plastic cover that you previously deleted. There is no way to activate the video ports built-in, although a discrete video card installed.

  NVIDIA GeForce GT 705
  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz
  HDMI resolution: 1920 x 1080
  VGA (via dongle) analog resolution: 2048 x 1536 x 32bpp at 60 Hz
  Support of up to two displays at the same time.

  There are several ways to connect monitors to your computer, but you can use two ports on the NVIDIA GeForce GT 705. The discrete card supports DVI - D (and VGA via a dongle) and HDMI. HDMI signal is the same as DVI - D in this case.

  BETTER (recommended)

  Computer-> DVI - D cable-> monitor #1

  Computer-> HDMI to DVI - D cable-> Monitor #2

  GOOD

  Computer-> HDMI to DVI - D cable-> monitor #1

  Computer-> DVI-D/VGA dongle-> VGA cable-> Monitor #2

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Sony camcorder initially recognized in the new Firewire on HP Pavilion 500 - 267C Desktop, then fails.

  Hello, I have Windows 7 on my HP Pavilion 500-267C.

  I bought a Firewire card (http://www.amazon.com/JacobsParts-Express-Firewire-Profile-Controller/dp/B007WTV092/ref=sr_1_5?ie=UT...) to install it firmly into the short slot and the computer restarted, he acknowledged, driver installed. I checked Device Manager and says "OHCI Compliant IEEE 1394 host controller, under IEEE 1394 Bus Host Controllers" when I play my clogged (wall and CPU) mini camcorder - DV Sony DCR - HC 85 NTSC, video import window instantly appears (from the photo gallery), I choose "Import video parts" or also "full band", the band rewind then I always get this message no matter what :

  "The digital video device that is used for importing video has been disconnected from your computer. Importing video will be closed.  Check that the digital video device is properly connected and turned on, and then try again. »

  I didn't hit what whatsoever. This also happens when I use Windows Live Movie Maker and free software that I downloaded to capture AVI. This problem is never happened on my Windows Vista HP Pavilion 2009 a6750t (it came with firewire) and with the same Camcorder - software started instantly, any specifications of my time, no worries, 5 weeks ago.

  On the new computer, I rebooted several times, also in a position to firewire cables (used one supplied with the card and mine), had the band in 'Play' or 'Stop', changed ports, nothing helps.

  Movie Maker initially rewind the tape however, but above message always appears, and the program closes automatically.

  What can we do?

  Success took place! I bought Texas Instruments FireWire card here http://www.amazon.com/gp/product/B002S53IG8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and the driver is automatically installed on my computer and photo gallery and Movie Maker recognized and allow me to import portions of the band successfully on my hard drive where I can edit the video. I tested and retested without any problem. I'm came across this site http://kc.flex-radio.com/KnowledgebaseArticle50179.aspx which had recommendations, including the Syba I bought (check 1/3 down), as well as an another chipset Texas Instruments also available on Amazon, http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=pc&ie=UTF8&qid=1406680989&sr=1-1&keywords=firewire+texas+instruments. I thank very you much referring to the Texas Instruments chipset firewire cards. I didn't realize that they would work so well. I am very happy.

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.

• Pavilion 500-090 USB driver works only with windows 7

  Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

  Hello:

  Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• 500-300na Pavilion: problem with Pavilion 500-300na (mother of Memphis-S) - Dead / no beeps sound and video

  Hello - I hope someone can help me please
  
  I have desktop PC HP Pavilion 500-300na.
  The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC does not work now.
  
  When you press the power button, the LED lights up, CPU fan, electric fan and the two spin system fan. There is no video. There is no beep error codes. What is it - actually dead.
  If I hold the button for about 5 to 10 seconds, the fans run down, but the rest spinning CPU fan.
  
  What I've done so far:

  Tried another monitor.
  Tried a different power supply.
  Powered by the motherboard on its own with any other disconnected.
  Taken the Cmos battery on the motherboard for 1 min and replaced it.
  Clean the dust from the fans (they were not so bad as to be honest).
  
  The machine worked with in PCI16 slot video card - I removed this for the test. As I can't get into the Bios, I can't put in the work of the "mother video card." Not sure if it is a problem.
  The unit has a strip of 8 GB of ram DDR3 - I tried this in another location without any changes.
  I have not tested the ram. I have not tested the CPU or deleted one of the fans / heat sinks.
  
  Thanks for any help you can provide
  Chris

  Okay, I think THAT I managed to fix it and understand what the problem was.
  
  I think the problem was double - first of all, before the problem started, Technical Assistance from HP have a BIOS update and download. I think that this update changed the Startup Configuration in the BIOS to "ENABLED" Secure.
  
  Not really a problem. . BUT...
  
  The video card I was running was a riser and secure boot DISABLED neeeded and legacy support ENABLED.
  
  I have reset the BIOS using the jumper (bios password) information – I also did a 'blind' changing information from the bios to switch to the use of the video of the motherboard (bash F10 for 10 seconds at the start, then three arrows down, then two returns... This pass BIOS to "Apply default settings and exit"). I don't know who really helped, but the machine comes up in life.
  
  I put the information here, in which case another experience a similar problem.
  
  Chris

• Pavilion 500 - c60: product key

  If I chose to load Windows 7 Home OS on the 8.1 that sits on the newly purchased Pavilion 500 - c60 will be I had problems? AND if I choose to RELOAD 8.1 on the computer in the future how do I get the product key if as you say his anchored in the bios?

  Thanks for your replies. My reason for decommissioning is a requirement with my Autocad Architecture 2012 which does not work on windows 8.1. Stupid me! I should have looked into this before buying the computer. But I like the computer because it is a 64 bit with 8 GB of memory and I love the W8.1 too. Very compatible with my ph sound cell phone android. So until I can afford to upgrade my Autocad I'm stuck with Win7.

• Pavilion 500-248eo: HP pavilion 500-248eo

  Hello

  Problems with getting outside windows safe mode. BlueScreen message don't THREAD EXCEPTION HANDLED (atikmdag.sys) SYSTEM.

  By restarting and pressing f5 and f8, trying to get a configuration with the mode menu without failure as a choice as well. I press the recovery of the system in the setup menu, then:

  -Troubleshooting

  ---> Advanced options I have no choice in the settings menu to start, then I go to

  -Command prompt

  His I type this information:

  bcdedit \set {default} safeboot network

  The computer will not enter in safe mode! The message I get in command prompt after which type it is:

  "Specifies the command line is not valid." "Run" bcdedit-? "using the command line.

  I did, but I don't know what is my next move.

  Can someone help me with my next move so I can't get into safe mode? Or is my only option to do a system restore and lost all my files?

  Its your video driver ATI that is the cause, upgrade the driver to the latest version if you can never get started in windows.

  Look under "Graphics-Drivers" and select "Driver AMD graphics card module" download and install.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-200-desktop-PC-series/5399647/model/6923421

• HP Pavilion 500 PC series 327 - ng: installation of Windows 7?

  Hello I need your help I really am at the end of my know-how and really desperate.

  So I bought this PC today, I had nothing against Windows 8.1 in itself, but I wanted to use my internet and my (T-Online 6.0) software wouldn't work on Windows 8.

  So I decided to install my Windows 7. Stupid as I was I of course removed the recovery partitions while I was installing.

  As soon as I had installed W7 I noticed that my internet was not working, while a other hand worked in the internet on the laptop.

  It turns out that some drivers were missing. So I had the drivers mentioned in this thread http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/pavilion-500-ethernet-controller-driver/td-p...

  After that, my internet worked at least partially. Partly that means my downloads kept in check different time periods. That includes downloading the latest driver from Nvidia, Adobe Flash and Windows updates. First of all, I thought it might have to do with the firewall, but the only active firewall was the Windows Firewall and disabling did not help much either.

  It can, so I took Realtek driver Ethernet isn't the right one for me?

  I'm back on my old PC now and everything works well, pourrais I switch my network of a PC card to the other, which would help?

  Or I might have a virus? Cause I have several times had the configuration of message by-Side failed when starting a program, I had the same message on my laptop, where I have my drivers through the new PC.

  I have never seen that message before and today several times... it always came when I wanted to start a Setup...

  Also the internet sites charge even more slow than on my old PC (and I sometimes get messages: content encoding error) and the Flash does not work despite the installation.

  I wonder why I was stupid enough to try and install Win 7 in a first time... I feel really bad now, because I don't know what do with my PC D:... done yelling at me...

  It was the first thing I've ever bought with money I earned myself

  I bet that there is no way to return to its original state, after I deleted the recovery partitions, right?

  You are the very welcome.

  For the love of heaven, I don't even think to look on the page of the driver for your PC!

  Those who will be fine, but you need the driver of this other model Atheros wireless card.

  Specifications of product for your model page shows a picture of an Atheros wireless card, but there is no driver Atheros on your model support page.

  I think that the Realtek ethernet driver you are interested in is this one... There are 3, and we can work better than the other 2.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-136583-1&cc=us&DLC=en&LC=en&OS=4063&product=7265554&sw_lang=

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Downgraded HP Pavilion 500 Desktop USB Controller works do not (PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09)

  Hello. I've recently switched to my HP Pavilion 500 (product # G5B59AV #ABA) windows 8.1 for windows desktop PC 7. I was able to install the drivers that worked through them looking for web. However, my attempts to install the USB controller in the tab two other devices of computer management has been problematic.

  I go to hardware ID and pull them to the top

  PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09
  PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  PCI\VEN_1022 & DEV_7814 & CC_0C03

  I then find the driver I need to install to solve this problem. But so far that many solutions I looked online haven't helped me. I was brought here by this forum post: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/downgraded-hp-pavilion-touchsmart-all-in-one-pc/2f91c517-330e-4ade-ab60-5bb2b7e53e10?page=2

  But still could not solve this problem. I have tried many attempts and downloaded and uninstalled AMB Catalyst software several times. I really like any other method can someone tell me step by step instructions. A video would be nice, but really just looking for something to finally resolve this issue. USB hubs on the front do not work and I really wish that any method that could solve this problem.

  Thank you in advance.

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems. Update the BIOS, chipset of low level driversand major
  device embedded and separate drivers.

  HP support/troubleshooting & drivers<- set="" your="" model="" and="" then="" your="" version="" of="">
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/
  ======================

  Hardware & drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-7

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  -----------------------------------------------------------

  This is my generic instructions for the correct driver updates:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model

  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 500-550nv: the upgrade of power

  Hello. I have HP Pavilion 500-550nv (in which case is microtour format) and want to upgrade my HP power which is only 180 W!

  I want to know what brand of food is supported for my pc model (hp pavilion 500-550nv) and how much wattage recommended (up to 600? up to 650?). Which is the recommended limit of power supply of power for my HP?

  I'm waiting for your answers. Thank you

  Hello @jeandoumpier,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on food and wanted to help you!  I understand that you are concerned about upgrade options.

  You should be able to improve the power you want.  The Office should take but a lot of power, it must, food that is installed.  Just check that the power supply to use, firmly enters the tower.  Based on the Specifications of the product, you can find the dimensions tour here:

  • Height: 36.7 cm (14,48 in.) unpacked

  • Width: 17.5 cm (6.91 inches) unpacked

  • Length: 38.9 cm (15.35 inches) unpacked

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!