HP Pavilion 500-326na: Fix fan GPU Desktop?

Similar Questions

• HP Pavilion 500-326na: graphics upgrade on HP Pavilion 500-326na card

  Last year, I bought a HP Pavilion 500-326na, and recently, I decided that I would update the graphics card. The card that I'm looking is the nVidia GeForce GTX 750 Ti. This would be consistent with (and in the form of) my computer? In addition, I'm not sure exactly how I had to upgrade my power supply, if necessary, and if you can direct me to a decent choice.

  Thank you very much.

  SJ642, welcome to the forum.

  According to the Specifications of the product , the computer has an external power supply 180W (PSU).  If this is the case, you won't be able to level the video card.  The 750ti requires a power supply of at least 300 w; Some reported that 400W is needed to make it work properly.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion 500-326na: upgrade of power supply for HP Pavilion 500-326na

  Last year, I bought a HP Pavilion 500-326na. I now want to update its graphics and to do this, I need to power level. I want to upgrade to a CX500, but the specs say that his current power is "external". I don't know what this means, and indeed, I don't know if I will be able to upgrade. I see no reason why I shouldn't be, but everything I've seen only offers assistance on internal types.

  Thanks for any help.

  Hello

  Look at the power supply cord.  If you have a device of black brick similar to those for portable computers, then you have an external power supply. PC with external cannot be upgraded with the installation of an internal power supply as a Corsair CX500 according to HP internal.

• Pavilion 500-160ev: CPU fan control

  Hello.im trying to figure out how to increase the number of turns of my cpu (pwm) fan in my Desktop hp Pavilion 500-160ev. I tried to do it in the BIOS, but there is no such option. Also I updated my BIOS but I can't find anywhere where to change the fan speed, the option is obviously locked. Third-party program does not work as SpeedFan.I have almost tried everything. Any ideas?

  40 c seems quite acceptable.

  The Noctua NH - D9L has a maximum speed of 2000 rpm, minimum speed of 400 rpm

  If it is open to only 800 RPM it shows me that your system runs pretty cool.

  You can install the free programReal Temp, it will show your CPU current temp as well as distance max temp and "the thermal State.

  You can run a CPU Stress Test program to test your fan. As the program your CPU at 100%, you should see the ramp speed of the fan to the top.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• HP Pavilion 500-250la: is this GPU compatible with my computer?

  Hello, I was looking around on what I need to upgrade my computer, an HP Pavilion 500-250la.

  I would buy this GPU, http://www.newegg.com/Product/Product.aspx?Item=N82E16814202137

  Is it compatible with my computer?

  And I was also told that I would need a new power supply. What kind of power supply do I need?

  @VicBoss

  I checked on the website of Sapphire for the specifications and I found these two pages, which have the same name and are the closest, I could find the name you provided. We have 2 cooling fans and the other has 3.

  R9 vapor-X 280 X 3 G D5 - http://www.sapphiretech.com (version 3 fans)

  R9 vapor-X 280 X 3 G D5 - http://www.sapphiretech.com (version 2 fan)

  Both recommend a minimum of 750 W power supply and both require 2 x 8 pins to THE power connectors, so you'll need improve your diet in order to predict that the two cards are also double wide and it will probably block of the PCI Express x 1 (Gen 2.0) locations on the map. I suggest you check the space inside your system, particularly in the area of your current diet to see how you have the room. Power 750W power supply (or higher) will certainly be larger in physical size.

  You have to watch a third party supply, as I am not aware of all that HP stock with this title.

  I hope this helps.

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• HP Pavilion 500-164: serious problems HP Desktop

  When fans of button pushing power lights, but no beeps or other sounds. Monitor does not come on, the usb ports do not work. CD rom will opening and closing, but do not read the disks. Help

  Thanks, I guess it would be the best way to go at this stage.

• Pavillion 500-326na: Office purchased without warranty has already expired

  Hi all

  I bought your desktop HP Pavilion 500-326na six months ago and recently received a notice telling me that the warranty on my pc had expired the year before I bought it. When I bought the pc, it was said that the product carries a one year manufacturer warranty. What are the options that are available to me?

  Kind regards.

  Hello:

  Contact HP for the country where you live.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  The customer service representative should send you an email with a link to download a copy of your receipt of sale/invoice showing the date of purchase of your PC and they will adjust the period of guarantee accordingly.

  I had to do the same in February when I bought my new HP laptop.  The guarantee applies for one year, but it showed that expires this month instead of next February.

  I think it took them a few days to make corrections.

• Need help with USB 3.0 on desktop Pavilion 500-214

  I am currently the owner of desktop HP Pavilion 500-214.

  I noticed that the USB 3.0 ports do not seem to work.  Tried with 2 different brands of USB cables now.

  I connect my Samsung S5 with USB 3.0 desktop.  It connects to the 3.0 for a few seconds and then gives the message "cannot connect USB 3.0 devices.

  Does anyone else have this problem?  If so, how to fix?  Or the troubleshooting steps that you might suggest?

  Help, please.  Thank you.

  "So there is no way to use USB 3.0" so it seems.  It is a problem of Samsung and Windows 10 and not HP

  When Samsung found a solution, then it will be OK.

• Pavilion 500-420nl: installation of a new GPU in HP Pavilion 500-420nl

  Hello everybody, basically, I bought a HP Pavilion 500-420nl PC and decided to improve a bit with a new power SUPPLY and GPU. The new PSU: Thermaltake Berlin 630W and the GPU is Sapphire R9 270 X double-X OC. The problem is that when I insert the GPU and connect the 2 connectors of 6 pins, I get only a black screen. There is no beeps, the fan runs but the screen remains black. I deleted the old GPU drivers and the new one is plugged correctly, but there is only a black screen. The motherboard should be compatible with the GPU, seeing that it has a PCI-E x 16 slot 3.0. What could be the problem?

  Hello

  Please see the following documents.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• Downgraded HP Pavilion 500 Desktop USB Controller works do not (PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09)

  Hello. I've recently switched to my HP Pavilion 500 (product # G5B59AV #ABA) windows 8.1 for windows desktop PC 7. I was able to install the drivers that worked through them looking for web. However, my attempts to install the USB controller in the tab two other devices of computer management has been problematic.

  I go to hardware ID and pull them to the top

  PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09
  PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  PCI\VEN_1022 & DEV_7814 & CC_0C03

  I then find the driver I need to install to solve this problem. But so far that many solutions I looked online haven't helped me. I was brought here by this forum post: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/downgraded-hp-pavilion-touchsmart-all-in-one-pc/2f91c517-330e-4ade-ab60-5bb2b7e53e10?page=2

  But still could not solve this problem. I have tried many attempts and downloaded and uninstalled AMB Catalyst software several times. I really like any other method can someone tell me step by step instructions. A video would be nice, but really just looking for something to finally resolve this issue. USB hubs on the front do not work and I really wish that any method that could solve this problem.

  Thank you in advance.

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems. Update the BIOS, chipset of low level driversand major
  device embedded and separate drivers.

  HP support/troubleshooting & drivers<- set="" your="" model="" and="" then="" your="" version="" of="">
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/
  ======================

  Hardware & drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-7

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  -----------------------------------------------------------

  This is my generic instructions for the correct driver updates:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model

  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c desktop PC

  I bought a desktop PC computer given to nine HP Pavilion 500-027c Wal-Mart, 2 weeks ago... 5-in-1 memory card reader does not work... the Device Manager indicates that it works correctly, but when I put a memory card, nothing happens... The white light will come on indicating that the memory card has been inserted, but the computer does not recognize that something has been done... I would just replace the card reader itself... I see on the hp support where it is possible to replace the reader of card memory (before I/O), but I don't know where to buy the card reader itself real... I have no card on the card reader either... Help, please!

  Hello

  You can find a list of the parts for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=H5P68AA

  What card you use, the machine only supports the following cards:

  • Secure Digital (SD, SDHC, SDXC)

• HP Pavilion 500-141ea: GPU for HP pavilion 500-141ea

  Hello

  A couple of years ago, I bought a HP pavilion 500-141ea, I am now looking to upgrade the GPU and the power supply on this subject. I want to replace the old GPU with a GTX 960 but I unure know if it is compatible with my motherboard because I'm not sure if it has the version of the bios that is needed to support the 960 GTX

  Information on the motherboard:

  MS-7778 (Jasmine)

  BIOS version: FRIEND 80.46 10/03/2013

  If it doesn't not work could offer you some suggestions?

  Thanks in advance!

  Madness 78, welcome to the forum.

  960 GTX requires UEFIin the motherboard instead of a standard BIOS / Legacy.  Your motherboard has UEFI.  You have two things to consider: 1) the power required to run the video card correctly and 2) the length of the card.  The power supply unit (PSU) to the count is 300W.  I think that you will need a minimum of 400W.  I recommend a block of power SUPPLY Corsair of at least 500W.  The modular power supply to reduce the number of cables you are using.  This allows for better air circulation.  You can determine if the card fits by the measure of the e/s rear plate at the front of the computer.  This will allow you to see if it fits and if other ingredients will be in the way of this Assembly.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• CARD READER USB FOR DESKTOP HP PAVILION 500 - C60?

  I have a new 500 - C60 HP Pavilion desktop computer, but the front card reader does not accept the largest flash Compact Flash (CF) card.  I have an old USB multi-card with four different card slots, which accepts the card see  Would this setting work satisfactorly?

  Thank you

  shamrock838

  Hello @shamrock838,

  I understand that your desktop HP Pavilion 500 - c60 PC does not support the biggest Compact Flash Memory Card and you are curious as to whether or not you can install an USB multicard Reader which accepts the memory card see First of all, you have reason 7 - in1 media card reader did it installed does not supported CF memory card, but it supports the following cards:

  • Digital safe™ (SD)
  • Secure Digital High Capacity (SDHC)
  • SDXC
  • Memory Stick
  • Memory Stick Select
  • Memory Stick PRO
  • Memory Stick MagicGate

  I don't see why you can't connect the 4 - in1 USB multicard reader you have. Until the operating system detects and installs, you should be fine.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!