HP Pavilion desktop computer - 550-075n: FIREWIRE CONNECTION to a DESKTOP HP PAVILION

Similar Questions

• HP desktop computer will not automatically connect to wifi

  my hp desktop computer recently refused to connect to my wifi automatically, although he did years before. I have two laptops, an ipad, a blackberry bold and an ipod touch that ALL connect automatically. what the hell is happening?

  Hello

  1. don't you make changes to your computer before the problem?

  Follow these steps and check if the problem persists.

  Step 1:
  Update of your wireless cards and see if the problem still occurs.

  Step 2:

  In addition, you can uninstall and reinstall the Device Manager wireless network card to be a safer side.
   
  To uninstall the wireless device manager,
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.

   

  Now you can install the latest wireless drivers and check if this solves the problem.

  See also:

  Why can't I connect to the Internet?

• Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

  Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• How can I get information off my office on my laptop when firewire connections are different?

  I have an old desk (2007) that won't start, it turns on but then stops. I went to Apple and they advised me to connect my computer laptop (2013)

  on my desktop with the firewire connection. My problem is the firewire ends are not the same on both computers.

  Laptop has HDMI and the Office has a connector with many small holes? (not tech saavy)

  I want to know how to connect the too to retrieve my information?

  You use a FireWire 400 to 800 adapter and/or a FireWire 800 adapter Thunderbolt.

  (141798)

• Windows 7 computer portable HARD drive connected to a professional XP S3

  Windows 7 computer portable HARD drive connected via USB to a desktop XP Professional SP3 PC.

  PC shows the folders, I have access to the folder of Photos, but cannot access the Documents folder where files I need. I tried to share the folder, but it does not work.

  Any suggestions please?

  Probably, this can be corrected by taking possession of these files / directories.  Once you do this, however, you will find probably your permissions in disarray try to re - install the drive in your computer to Windows 7...

  "How appropriate a file or a folder in Windows XP"

  <>http://support.Microsoft.com/kb/308421 >

  HTH,

  JW

• Computer Vista laptop cannot connect to new wireless router

  I had the laptop for about a year and a half, and he has a history of being pretty skittish about the wireless connection.  Often he simply refuses to do so.  During vacation last year, for example, the other three laptops connected family easily to wi - fi hotel, but mine has refused to.  There are a lot of other moments when the laptop could not connect, but I was able to connect to two most important places - home and work - without much trouble, and so I haven't looked too hard to solve the problems of connection up to now.

  This week, I replaced the router in my original configuration.  The old Netgear router kept giving up the connection between her and my ISP.  The new Linksys router looks rock solid in this regard.  I have a desktop running XP computer that is wired to the new router Linksys, and he sees the internet very well.  My laptop Vista unable to connect (wireless), however.  He sees the network with a lot of intensity of the signal, and it tries to connect.  I get a message saying that the connection takes longer than usual, and then another message saying 'connected.'  However, I do not have internet access, and I see other devices (just the XP desktop, really) on the network.  The Network and Sharing Center shows my laptop connected to the 'unidentified network', and then there is a red X between this network and the Internet (represented by a grey globe).  Laptop computer signals its 'access' as "local only".

  From the desktop, I can access the internet, so the router is connected to the points upstream.  From the desktop, I can also access the router configuration pages, and I see that it does not list the laptop as a dhcp client, even if the laptop thinks that it is connected.

  ipconfig on laptop computer displays a wacky IPv4 address: 169.254.2.91 and I guess that the laptop does not get an address passed to the router.  I think that there should be a 192.168. *. * address if it worked properly.

  Now, I was pretty sure my laptop's wireless adapter to work properly.  It always connects to the old router and it always connects to the work.  But to be sure and really test the new router, I went out and bought another USB adapter wireless.  When I plug it into the computer to Office XP, the Office connects to the router and can see the internet (even with the connection cable is disconnected).  So the new router and the new wireless USB adapater properly.  When I plug the USB wireless adapter into the laptop, the laptop still can't connect and still not get a good ip address assigned by the router.

  I've been at this for a few days now, and I could really use some help.  I read a few items in the Microsoft forums that was supposed to fix the problem.  One of them told me to try to start a program called DHCP in the Administrative Tools folder.  I do not have this program on my computer.  Another told me manually change my registry (ouch!) and add a new DWORD value, and set its value to 1.  I did, but it did not fix the problem.

  I would be very grateful for any help.

  Jim

  Alright.  I am home to work and back again.  I have read several posts with people reporting problems similar to mine, so I guess I'm not alone in this.  In a thread, the experts proposed to start in Mode safe mode with networking.  So I gave that a shot.  I still couldn't really connect - just this 'local only' without an assigned IP address.

  One thing I did notice, is that my laptop brand and its wireless adapter seem to get a special mention in most positions.  I have a HP Compaq Presario CQ50 Notebook PC running Vista Home Premium SP2, 32-bit version (even if the processor is 64-bit).  The wireless adapter is an Atheros AR5007.  Several other people with this card have reported problems.  Maybe it's the cause?

  I look into updating the driver for the card, even if yesterday's test with the separate USB wireless adapter showed that the problem could not just be limited to the Atheros card.  To search for a driver update, I connect my laptop to the router with an ethernet cable.  It's nice to see the web on your laptop.  No update driver does.

  For fun, I try to establish a wireless connection with the router, while the wired connection is still in place.  Looks like maybe it worked?  I say a little prayer and unplug the ethernet cable...

  It's a miracle!  I have a wireless connection to the router and beyond, to the internet.  Huzzah!

  The network has a real name, too, instead of just 'unidentified network '.  I want to change the network type from the public to the private, which I was unable to do while he was still 'unidentified '.

  Can I terminate the connection so that I can see what happens when I try to reconnect.

  Another miracle!  It connects to and still see the internet.  Callooh!  Colay!

  Next test: see what happens after a reboot... (please, please, please)...

  Ch-ching!  It works again!

  Final (?) test: reinstall the McAffee internet security suite and restart.

  And it still works.

  Here's a recap of what I found:
  1. laptop could not connect wireless router again, despite dozens of attempts in which I get every available straw
  2. laptop computer could see the internet when connected to the router
  3. laptop could connect wirelessly to the router while the wired connection is in place
  4. Once this first wireless, laptop computer was able to connect to the router even when the wired connection has been removed and the computer restarts

  I would describe my discovery above as a work-around rather than as a solution, however.  It does not always help me stay connected the next time I'm on vacation, for example.  But perhaps the information I provided can help experts to diagnose the real problem a little.

  I look forward to hear something back.

  Jim

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Install and run Adobe animate on a computer that is not connected to the internet

  I am running Creative Suite 5 on my computer graphics. This computer is not connected to the internet for security reasons. I want to upgrade to Adobe animate but I am confused how the creative cloud software works. What I must be connected to the internet to install and run this new software? Y at - it an option to install and run this software on a computer that is not connected to the internet?

  I appreciate any comments on this issue.

  Thank you.

  CC needs you to be online:

  1. When you turn it on for the first time

  2. once in 90 days, you need to be online to keep the active CC.

  The rest of the time, you can use it as desktop CC without any internet connect product.

  Concerning

  Stéphane

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• computer disconnects immediately after connecting

  my computer disconnects immediately after connecting. He did also thisin safe mode, no idea how fix

  Reconnect to your Windows XP work.
  Go to Start -> Run -> type regedit ->OK -> Regedit should start.
  On the left side, click on HKEY_LOCAL_MACHINE
  In the Menu , go to file -> load the hive
  Find the file C:\Windows\System32\Config\Software -> clickOpen
  Type a key TEST name-> click OK
  Now, on the left, go to the HKEY_LOCAL_MACHINE\TEST\Microsoft\Windows NT\CurrentVersion\Winlogon
  Once you have clicked on Winlogon, values will appear on the right side.
  Search
  Shell    REG_SZ Explorer.exe
  UIHost    REG_EXPAND_SZ logonui.exe
  USERINIT    REG_SZ be C:\Windows\System32\userinit.exe (preferred) OR just userinit.exe
  If the data are not the same then double click on the registry value (Shell, Userinit, UIHost)
  a screen opens where you can insert the data from the correct value.
  Once all 3 of these registry values are the same as above, then on the left side once more go up and click on
  HKEY_LOCAL_MACHINE\TEST
  Then in the menu, click on file -> unload the hive -> clickYES to confirm the unloading of the TEST hive.
  Quit Regedit, restart the PC and try again.
  If you are unsure of any of the procedures above, please let us know.

• I'm trying to set up a second computer on my wireless connection. How to get my security code?

  Internet

  I'm trying to set up a second computer on my wireless connection. How to get my security code?

  http://www.practicallynetworked.com/sharing/xp_ics/

• I want to install Srvc Pack 3 for Windows XP on a computer that is not connected to the internet. I already ordered the Windows XP3 installation CD. Are there instructions for my situation?

  I want to install Windows XP, Service Pack 3 on a computer that is not connected to the internet.  I have already ordered the CD of installation of Microsoft.  When the CD comes, there will be instructions for people who are upgrading from Windows XP, Service Pack 2 for Windows XP, Service Pack 3 on computers that are not connected to the internet?  Are there special instructions for people with my situation?

  HI V - ron,
   
  As you have already ordered for the CD of Windows XP Service Pack 3, you can install the operating system by following the on-screen instructions on the CD at the time of installation.
   
  However, I recommend you to go through the articles given before you install Windows XP service pack 3:
  Steps to take before you install Windows XP Service Pack 3
  Information about Windows XP Service Pack 3

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• I am running windows XP and my computer freezes when I connect my sansa view to the USB port.

  Only, it crashes when I connect any sandisk MP3 player and any other computer that I have connected the MP3 player to a hanging. This problem started about two weeks ago after installing service pack 3 for XP.

  Hello Kellendil8,

  Thank you for your message.  Please, try the following:
  Click 'Start' > click 'my computer '.
  Click on 'Tools' > select 'Folder Options' > click the 'View' tab > under "Hidden files and folders", select "Show hidden files and folders" > click "Apply & OK.
  Double-click on "C:" > double-click "Documents and Settings" > double-click "All users" > delete the DRM folder.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.