HP Pavilion dv6-1210sa: Bluetooth problem

Hello I bought new headphones for bluetooth, and I thought that I could connect to my laptop but I'm not sure now, I thought that perhaps he did not due to not having the driver for it, but still questions

A little fed up now and don't want to lose any more time thinking I am not put in right place and whether actually to him is not not possible in the first place...

I installed HP Wireless Assistant, hoping that would help as details of HP bluetooth also mentions good and yet still nothing when I go to plug my headphones (headset connected to my phone and I have the helmet details to tell I can pair it with two devices).

I'm wasting my time?

Help please.

Hello:

Yes, unfortunately you're wasting your time.

Here is the link to the product for your model.

http://support.HP.com/us-en/product/HP-Pavilion-DV6-1200-entertainment-notebook-PC-series/3872814/model/3976065/document/c01787636/

It does not come with built-in bluetooth or this feature would also have been listed with the 802. 11b / g WLAN wireless connectivity specifications.

If you want the Bluetooth, I advise you to buy an external usb bluetooth adapter.

Tags: HP Desktops

Similar Questions

  • Pavilion dv6: blue screen problem

    GET THIS EACH THEN & NOW THE SCREEN AND MUST SHUT DOWN LAPPY. PLEASE HELP WITH THE SOLUTION!

    HI @Ayushi_kh

    Thank you for your response.

    Here is a link to the HP Pavilion dv6 Notebook PC. Please see Chapter 4 for removal and replacement.

    When I was browsing through the maintenance and service guide, I noticed you have switchable graphics.

    That being said, I suggest you do a recovery in factory.  This will reinstall the drivers of graphics cards correctly and I hope to solve this problem.

    Performing a recovery of system HP (Windows 7)

    During the recovery, there is an option to backup your personal data if you do not have a recently I'd do one now to avoid any data loss.

    Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

    If for any reason any recovery did not resolve the issue please provides your exact model of DV6.

    How can I find my model number or product number?

    Good luck!

  • HP Pavilion dv6 power supply problem

    I have a Pavilion dv6 for the past three years; It worked perfectly until recently.

    Two months ago he began to take more time for the prosecution, but he continued to work

    fine. The battery always charge at a slower pace, but now there's another more

    serious problem.

    If the battery status says he has some fees (even up to 98%), but as soon as

    I pull the plug on, the computer dies immediately. It does not even

    turn on if I do not connect the charger. If I turn on the computer with charger

    connected, the battery status is always the same. If I leave the computer for a couple

    days without connected charger, the battery loses some (but not charging

    too); This means that the battery itself is not really in a very bad state.

    I suspect some hardware glitch! What could be the problem; y at - it an idea?

    Control of operation of the equipment (battery test):

    http://support.HP.com/us-en/document/c01443317

    or

    http://support.HP.com/us-en/document/c03463381

  • Pavilion dv6 laptop Audio problem

    Product: Hp Pavilion dv6 Notebook PC

    Product number: QE068UA #ABA

    Windows 7 64 bit

    Hello, so here's my problem. This laptop is only three days old, and already I have a problem. So what is happening is that the audio transmission is having a problem. I have 95% use a headset and the audio works fine with headphones. BUT what happened earlier today that I just listened to a few songs and then I got a call from Skype, and just as I began to speak, the sound was messed up. The person's voice played through headphones, but my computer sound (the song) started playing through the computer and not the headset. Then, I tried to unplug my headphones and plug it back in, but then it didn't always work. The only way it worked was if I held the helmet and halfway into the socket. So, basically, I can't really talk to anyone on the computer without computer audio is turned on and messed up. Any help would be good. Thank you!

    Welcome to the forum.

    Try this and see if it helps.

    Right click on your sound on your taskbar icon and enter the Settings of Volume Option.

    Check the boxes for your audio devices.

    Click OK

    Now, click on the sound icon and see that you will have a sound control for your devices appear next to each other - there will be a line through them.  If you set the primary audio device, everything goes with it, adjust the other (s), it/they adjust only.

    Adjust the checked boxes and sliders to get what you want.

    CHANGES 1

    November 3, 2011

    Sound--> reading--> speakers and headphones-->--> advanced properties


    I think you need to use the "Exclusive Mode" setting on the Advanced tab to keep only one application (another) to capture the sound control.  I don't know which application would have priority (or which one you prefer under what circumstances)-I think this is where you will have control over what happens when, for example, you use a Skype headset session and start a game session which (I assume) would use the speakers on the laptop (or external speakers (, depending on your configuration.)  See the graphics down.

    Change 2

    November 3, 2011

    See graphs of 'Communications' down

    Note that you can play with a variety of other sound settings (without making any damage) to increase the listening pleasure.  Just go slowly and check between the changes to make sure that you do not have too much too fast.

    Beware of the "improvements".

    For example: The Loudness equalization can make a song sound clean and strong, it could deafen and strangle with the next song and make it difficult to hear. It is the opposite of what we want to do.  So desperate, try - if it works, use it, otherwise shut it off.

    GRAPHICS CARD:

    Right click on the sound icon:

    Volume Control Options:

    The options resulting:


    "Exclusive mode" check or uncheck the box to control the behavior of this device!

    Improvements

    Communications:

    It is a setting in the Strait called "Communications" - If you use your laptop to make phone calls, you can adjust this setting as well as others.

    Right-click on the icon of your Sound --> click on "Volume Mixer"--> click on the little icon under the word "Applications".

     

    Good luck!

    I hope this helps you!

  • Pavilion dv6 Notebook PC - problem with the installation of ubuntu

    Hello

    I have HP Pavilion dv6 Notebook PC.

    BIOS ver. Hewlett-Packard F.17, 02/06/2010

    X 86-based PC
    Operating system: Win7 Home Premium

    I tried to install the ubuntu 5.04 version but it shows error "Kernel Panic"

    I tried several times but is unable to come up with solutions.

    Please help me... its urgent...

    Thank you very much for the reply!
    The information provided by you is very useful...

    This problem can be solved by putting the flash drive for installing and using a more recent version of linux...

  • HP Pavilion dv6-6135TX startup problems

    My brothers HP Pavilion dv6-6135TX, with specifications, 2nd generation Intel Core i7-2630QM (2 GHz) 4 GB RAM 640 GB HDD AMD Radeon HD 6770 M. Is having problems starting, if the battery is in, just lift the lid, it will get to start to boot or with the battery, plug the charger will get to start initialization. Unfortunately, he never through the start cycle die in 5 seconds, no matter if I press F2, F8, F11 or another F key, I entered the bios once, but once again, he is dead a few seconds. I tried out the hard drive to see if it would start from the HP recovery disk I have, but once again he is dead a few seconds, even tried out the cmos battery with no change in symptoms.

    At this point I think that the motherboard it passed, anyone got any thoughts on what is the problem?

    His cd player was working not the night before, have an error code 19 and we used thisdifficultycould this because of this new problem, see it work very well, after you have corrected this error and restarted?

    Hello memoirs,

    From what you explained is not starting the computer, with or without the battery, it looks like that the motherboard is gone.

    Anthony

  • HP pavilion dv6 1241et: Wifi problem

    My computer hp laptop pavilion dv6 1241 and. Work of the laptop good but a little bit older. Computer laptop wifi card second time first time change error card error wifi with guarante the second time no guarantee that I use the ethernet cable. I upgrade ram and wifi card. Please give me advice

    for the wifi card I can't find anything on the replacement, then you want to stay with the one you've got, or buy an external

    For RAM, the requirements for the upgrade are:

    201 pine, at 800 MHz, PC2-6400, DDR2 SDRAM Small Outline Dual In-Line Memory Module (SODIMM)

    or something like that

  • HP dv6 3230us: Bluetooth problem HP Pavilion dv6 3230us

    Hi all

    I'm having a problem with the BT to my HP laptop driver. I have just reinstalled my system, and although I tried to reinstall the driver of BT, at the end of installation, I get the error of "make sure that the BT module is on.

    What should do? I tried to install the bluetooth driver and I got this at the end:

    Thank you

    Ana

    Hi, Anna:

    According to the list of parts for your laptop, you try to install the wrong bluetooth driver.

    You need this driver for the bluetooth radio has your laptop...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_81348_2

    You may also install this software in order to enable the bluetooth radio.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_112799_2&swEnvOid=4059

  • Pavilion dv6: graphic driver problems

    I recently updated my graphics drivers on the AMD website, which I did not know that at the time, did not fully support the laptop itself. After having done that, I had a problem with playback of videos where in certain circumstances the video would be black but audio would play again. I tried to uninstall the graphics driver that seems to resolve the video issue, but then none of my games would launch at all. Is there a way that I can return the graphic drivers for the basic version where I had not either of these issues?

    Hello:

    See if works by running system restore.

    Select a restore point created before you tried to update the graphics driver from AMD.

    If you are not familiar with how it works, please see the info on the link below.

    http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

    If this does not work, reinstall the switchable graphics from AMD/Intel support page driver and the driver of your laptop.

    If you are uncertain which one that would be, please send the number of full model of your computer laptop dv6.

  • Pavilion DV6 6154 TX: Problems after update to windows 10

    I upgraded my OS from windows edition laptop home premium windows 10. Then, I am facing so many problems with OS (black screen, striking cursor before start up and bluetooth disabled and not able to update to the new version of Bluetooth).

    So I think going to the earlier version of windows, but I have some doubts in this regard. Please find me answers to the following questions.

    (1) if I come back to windows 7, will solve my problems?
    (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

    dabbada wrote:

    (1) if I come back to windows 7, will solve my problems?
    (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

    Hello

    Thanks for posting in the Forum from HP Support.

    REP 1) If you didn't have a problem with Windows 7 but only with Windows 10, probably the problems resolve and will not happen on Win 7. I can't guarantee 100% but it seems normal.

    REP 2) Yes, if you go back to your previous operating system (aka Win 7), you will be able to try to Win 10 later if you wish.

    A few tips:

    > > If you want to try to solve your problems of Windows 10 without going back to Win 7, you can try to download/install HP Support Assistant

    http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

    http://support.HP.com/us-en/document/c03467905

    Please, download it, it's about 39 MB, run it and update all the drivers and all of the HP software.

    Please, go to the control panel and make sure that your Windows is fully updated

    > > If this is not enough, here are the instructions how to return to Win 7 (they only work if you upgraded to Win 10 in the last 30 days):

    http://www.howtogeek.com/220723/how-to-uninstall-Windows-10-and-downgrade-to-Windows-7-or-8.1/

    http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

    Once you return to Win 7 and if you later decide to reinstall Win 10, note that the free update will be available until the fall of 2016. Here are the instructions how to upgrade to Windows 10 (please use the USB/ISO method) > > http://support.hp.com/us-en/document/c04730900

  • HP Pavilion DV6 video drivers problem

    Hello world

    I bought a HP Pavlion DV6-6C52EL, last year, with Windows 7 pre-installed. After two months I have upgraded to Windows 8 and now to Windows 8.1 (I did a new install of Windows 8 and an upgrade from 8 to 8.1).

    But I have some problems with the video drivers. In particular, each time I get an error message about 'Application of the load MMDriver. First of all, I must say that my VGA is an AMD Radeon 7470 M + the built-in Intel HD 3000 (my processor is an Intel Core i5).

    So I uninstalled the video drivers (the AMD and Intel VGA drivers) and reinstalled the new on the HP Support site, but they are for Windows 8 (not for the 8.1) and not updated. in fact, I always get the error message, and I see that the AMD Radeon 7470 does not work. Only the Intel HD 3000 jobs. In Device Manager, I get the error Code 43 on the Radeon. Suggestions? I've already updated the BIOS to the latest version, without success. Should I downgrade to Windows 8 or 7?

    HP, please update your drivers for Windows 8.1.

    Thanks in advance for your help.

    12/15 PATCH: Finally, I have completely solved the problem. Now, both the VGA and the brightness adjustment work perfectly.

    After numerous tests, the pilot plants and the facilities (and a lot of patience ), I would like to share my solution for users with my same problem.

    Before you begin, please check the HP support Site if Windows 8.1 drivers are now available.

    • If Yes, you will get your graphics card works only by installing the proper drivers.
    • If No, please go to read this post.

    ==========================================================================================

    -If you plan to make an own 8.1 Windows Installer, just download the Windows 8 drivers for Intel HD integrated graphics card and the dedicated graphics AMD Radeon on the HP's Support Site and install them. They must work immediately.

    -If you have updated your system to Windows 8 Windows 8.1, as in my case, you may have some graphic problems. I'll show you how to solve these problems step by step.

     

         1. update your BIOS to the latest version available. Download from the Official Site of HP Support.

          2 uninstall the driver of Intel's integrated graphics and the dedicated Control Panel AMD graphics card driver. Do not restart your PC.

          3 using the free tool Display Driver Uninstaller (search on Google for the latest version), clean the registry keys and system files to completely remove drivers AMD. Restart your PC now.

    4. download the HD Graphics of Intel and AMD Radeon drivers for Windows 8 on the HP Support Site, but only install drivers from Intel.

          5 enter the BIOS Setup and change the mode of "Switchable Graphics"on"fixed".

     

          6 now install previously downloaded AMD Radeon drivers and reboot your PC.

    When you restart Windows 8.1, you should get the fully functional Radeon; check in the Device Manager to see if it's ok. If this isn't the case, please follow my guide illustrated in the 'Update 12/08' above post and try with that.

    You have now (finally!) the Intel and AMD Radeon graphics working with the brightness setting.

    Thanks anyway for users who have tried to help me.

    * NOTE: Those not worked for me, for my setup (Intel Core processor i5 2450 M with Intel HD 3000 and AMD Radeon 7470 M) so use these guides at your own risk. I decline all responsibility in case of problems or malfunction of your system. *

  • Review HP pavilion dv6-3120us battery problem

    my hp dv6-3120us pavilion will do not running the battery check when I click to run it, it says that batteytest has stopped working

    Thanks in advance

    Here is the link to check the status of the battery

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4308958

    Good luck

  • HP Pavilion DV6 6140 TX: Problem of HP Recovery Manager in Windows 10

    After the upgrade to windows 10 windows 7, HP Recovery Manager does not work. Whenever I open it, it says: "an administrator blocked you execution of this application. How can I solve this problem? Any help is appreciated. Thank you

    Hello

    Recovery Manager for Windows 7 will not work on an improved version of Windows 10. You must use the Windows 10 tool

    http://Windows.Microsoft.com/en-AU/Windows-10/Windows-10-recovery-options

    Concerning

  • Pavilion dv6 7011tx: bluetooth device does not

    my bluetooth device does not work, so I uninstalled the bluetooth software and install the new driver. now while I'm installing the new driver, it indicates "no bluetooth device was detected. Please make sure that your bluetooth device is connected correctly in order to continue installation '.» Please help me

    Hello:

    You can try reinstalling own W8 and see if the BT radio appears.

    As he was working on W8, he must have worked on W10.

    I assumed you are passed directly from W7 to W10, and if you had the connection manager software installed in W7, which could adversely affect the BT radio does not not on W10.

  • Pavilion dv6 2170 clock problem after replacing the CMOS battery

    Hello world. Sorry for my bad likely English

    OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

    in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

    You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

    Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

    However, you can try this.

    Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

    -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
    -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

    Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

    Good luck.

    BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

Maybe you are looking for

  • Thunderbird freezes, it does not solve thunderfix. MosBackup do not restore or backup, I have deleated several emails without change

    I use Thunderbird for several years with no problems, while I can still receive/send emails, the program freezes. I tried 'Thunderfix' without change, Mozbackup stalls 'calculate the required space', also fails to restore the last backup or previous

  • Why Flash has stopped working?

    I have a problem of Flash that seems similar to others I've seen but not exactly. Flash stopped working on some applications - small windows flash in Facebook show and image but when I put the mouse on them that everything disappears. If I hit the ri

  • Enabling Security Center - how to?

    I use Windows vista services Pack 2. My service center service is disabled. Despite all my efforts, I am not able to enable it. Please advise to allow CSMIDHA

  • vga and hdmi to a monitor connection

    My question is, hang both HDMI and VGA will harm my computer new HiDef screen.  I want to connect two computers to a single monitor.   An old Emachine has only VGA output monitor and my new Dell has HDMI and VGA.  There are programs on the emachine t

  • BB 5.00 on Windows Server 2012

    I just set up a Server Windows Server 2012 and installed BB 5.00 to it. The installation went well and I was initially able to get the web page to display the main screen. When I click on one of the monitored items, he would meet a http404 error. I c