HP Pavilion Dv6 7078 CA recovery without recovery disk

Similar Questions

• HP Pavilion dv6-6c40se: lost recovery disk

  My hard drive recently failed and I replaced with a new one and I do not have the recovery disk, what shall I do?

  Order a USB HP recovery for your laptop. Is it the same as (Pavilion dv6-6c40se) as in the header?

  See the following HP for more information.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bph07143

• HP Pavilion dv6-6135dx: bad recovery disks sent

  If three computers laptops hp of my family died in the same week (tbf time my parents had the virus and I have neglected my failing ram). I took them all better buy geek team because I didn't have the time to fix and my parents are under warenty.

  All I wanted to do to mine was a complete system restore and wiping, already backed up all my data but my recovery partition has been altered and I don't have a recovery disk, a mistake I'll be sure to never do it again.

  After that the best buy had it for a few days, that they informed me that I had to buy the hp recovery discs. I paid extra money for 2 days shipping, obtained records, took the best purchase and waited several days to be told that the discs are bad and I had to ask hp for replacements for the disks, I had no more than a week ago. So today I spent over an hour on the phone by train and failure to have a person to understand and give me a solution to what I thought was a fairly simple problem (everyone I spoke with was nice, but we had a problem with his microphone and I could hardly understand them).

  Don't know what should be the next step, but I have been without my computer alone for weeks at this point and I seriously need to work.

  HI @Mag11 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

• Pavilion DV6-2163TX laptop recovery disks.

  I want to buy the recovery disc for my computer laptop dv6-2163TX pavilion. PL. guide me

  asokant wrote:

  I want to buy the recovery disc for my computer laptop dv6-2163TX pavilion. PL. guide me

  Hello

  Information can be found on this link

  Good luck.

• Pavilion dv6 - 6 c recovery fails in the process

  The computer was smart errors and do not start.  I removed the hard drive and checked with the hitachi software, which reported that the player was fail with an unspecified error.  I bought a reader of travelstart 750G of hitachi replacement similar to that from the laptop and ordered a HP recovery disk.

  The computer is a Paviliion dv6-6c35dx Entertainment PC

  The recovery disks provided is 67890-002 System Recovery DVD Windows 7 Recovery Media for Windows 7 product Service Pack 1.

  Recovery fails after about an hour after the final disc finished copying the files.

  The error message allows me to select the details that are:

  [15:31:01.90] ChkErrBB.CMD: detect an error in the PININST_BBV

  [15:31:01.90] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  [15:31:01.90] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  These errors are in a file CTOERROR.flg name which opened in Notepad, when I chose details.

  Using Notepad to navigate to the suggested location I find that there is no subdirectory \logs system.sav.

  I gave me the wrong set of recovery disks?

  I checked the hard drive and the new and old are hitachi HARD drive part number: 5K 750-640

  Please help, I would really like to get this year old machine recovered.

  Hello:

  I can't help you with the problem of recovery disk.

  This site provides a different part # for the kit, but that does not necessarily mean you've got the wrong set of disks.  HP may have revised their.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=16166

  I can help you with if you can read all 25 characters of the product key of Windows 7 on your laptop is to make your own regular W7 installation media, so at least you can get the laptop working again.

  Here is how to do this if you have the product key for W7...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• Pavilion dv6 - 2136ev: partition recovery Hp pavilion dv6 - 2136ev

  Hello everyone.

  Before all these i want you to know that I had created Hp recovery cd of hp recovery cd creator, but whenever I start since the 1st cd error 0xc000000e comes and I can't do anything.

  Well, I'm currently building my HDD from zero again.

  For some reason, I deleted the entire drive, and of course I deleted all partitions (hp recovery, system, HP_tools, C)

  I searched and I worked too much to make the record as it was before the format. I mean that of the recovery of all the cd's that I had created, I copyed all wim files (150) and I managed to create a WIM (base.wim) (base.wim 14.1 but original was 14, 4 GB) under the name exactly as it was. After that, I managed to extract the windows 7 because it was manufacture of imagex. Then I created the HP_RECVOVERY (E (16.8 GB) parition and I put this basic .wim file and all other files are on the recovery disk 1.) After that, I managed to organize and build the structure of partition as excact it was before with the same partition type ID, same custom mbr, even the score SYSTEM which is hidden and HP tools (100 mb). Now I can boot to the recovery with the f11 key partition or boot from the recovery partition if I choose the option from the Recovery Manager.

  In addition, I fixed the BCD and everything is ok. Custom MBR is okay, the trapping sequence is ok, IDS are ok etc.

  Finally, it seems that nothing happened. And here we are

  My problem is that whenever I try to do small restore the Recovery Manager I come with the error "the partition manager can run hard drive, it takes the cd to start." But as I said previously, disc 1 cannot start, it seems 0xc000000e.

  My second problem is when I try to create the 2nd recovery disk to load the stucks to 0 several minutes after he normally goes and when it ended at 100%, it displays "1 on 1 disc is necessary" and when I put the DVD on dvd rom comes another error and know it: the dvd is not empty put another dvd, etc.

  I think that some files are missing or some settings are bad, but I can not figoure what is it... !

  I tried to get in touch with HP is they told me that my laptop is wihdrawn and they can't send me set of recovery disks.

  Can you help me fix this situation?

  I would be happy

  Sorry if I had grammatical or language errors

  Well, I finally managed to fix the error 0xc00000e in the 1st recovery Cd, and now I'm reinstalling Windows 7 starting from recovery Cd

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Pavilion DV6809WM: Creation of recovery disks

  Hello

  If I create "Disk recovery" after other software has been loaded, the recovery disk includes additional software? Or what from the recovery disk partition?

  Thank you

  RoDnSuE

  Hello

  Recovery media is essentially a bootale copy of the recovery partition and will not include any software etc that was added because you bought the machine.

  Kind regards

  DP - K

• HP Pavilion DV6 6053ea - SSD SATA III HARD disk? & HARD drive space gone?

  Hello

  I have a HP Pavilion DV6 6053ea. It works fairly well, but I think I have an SSD would really speed up the loading of programs and start etc. I'm not so sure that the upgrade. I read on a thread if I had Port SATA 1 6 Gbps Supported or SATA Port 0 6 Gbps then my cell phone was good for SATA III. Is this the case? Joined a program hwinfo32 image, can you check if my phone would support SATA III?

  

  The other issue is my HD. My laptop says I have 750GB HD coming to about 700 GB after formatting. But my laptop seems to have only a total of 350 GB with all sectors added together. Where is the space?

  

  Hello

  Yes, your laptop has 2 ports SATA 6 GB/s (SATA III) most likely the hard drive and an optical drive are connected on it. There are also 2 SATA 3Gbps ports but not in use, I guess.

  The other issue is that there are 4 partitions but the partition 0 is strange and shouldn't be there. There should be a small boot for Windows partition (for BitLocker etc.), drive C: with Windows, D: drive with a partition recovery and partition Tools HP QuickWeb and some diagnostic utilities. It seems that the recovery partition is missing, the C: drive has been decreased and then created a small partition at the beginning of the hard disk. Take a look at disk management in administrative tools in the control panel this partitioning is on the hard drive.

• Pavilion dv6 3080el - sistem recovery after hard drive change

  Hello world!

  I have a pavilion laptop dv6 3080el with windows 7 and after the HARD drive that basically, I bought a disc double, specifically BLACK (2) WD Dual Drive.
  I used the DVD I reinstal windows using system recovery, but after I put in the DVD 5 and pressed "continue" to restart the system, I just get (after the first screen where by pressing ESC, you go to the Start Menu) wrote a black screen with "No boot device - insert boot disk and press any key".
  Any suggestions on how I can complete the installation of windows?

  Thank you!!!

  I just went through this same problem. See the solution posted under the message topic "pavilion dv-6 3216 does not start.

  Good luck.

• HP Pavilion dv6-6c75ea Enterta: Recovery windows media 10

  Hello

  After a BIOS update the PC does not start correctly. When it starts it askes for recovery/repair windows media. How and where can I download that?

  BR

  Roger

  You're welcome, Roger.

  Someone must have upgraded your dv6-6c75ea, because this model initially provided with Windows 7 to factory.

  When you start from the disc W10 make you, on the lower left side of the installation window, there will be a repair option.

  You can choose that and in this menu, there are a few choices of repair.

  But if you must reinstall Windows 10, as I wrote earlier, you will not have a product key as long as W10 has been previously activated.

• HP Pavilion P6000: Create the recovery disk

  I went into 'All Programs\Recovery Manager' and clicked on "Creating recovery discs" The computer asks me "do allow you the following program to make changes to this computer? I clicked 'Yes', but nothing happened. Can anyone help?

  Thank you for the information, @Bailin.

  Here's a company that may have what you need:

  http://www.computersurgeons.com/p-18140-Windows-7-Premium-64-bit-94nav6pra1-recovery-kit-gv405av-for-HP-model-number-p6230y.aspx

  Several members have used with great success.

• HP Pavilion Notebook - 15-ab25: recovery disks

  I just bought this new laptop with Windows 10 o/s installed, I guess that windows 7 or 8 has been initially installed on it, but how to make a set of recovery discs?

  See you soon

  The Recovery Manager expected to DVD as the media.  Make sure that you have enough blank discs before you begin and do not use DVD - RW discs.  Use DVD-R or DVD + R

• Pavilion g6-1118tx: HP recovery disk

  How can I get an online as downloadable free HP recovery disc? Thank you...

  If you have deleted the recovery media you really shot yourself in the foot. This is the reason why the recovery media creator does not work.

  You will need to buy a HP recovery media or HP partner to return your laptop to the working state, in which it was delivered.

• Pavilion 1240A G6: Manager/recovery disk

  Recently, I had to format my HD and reinstall win 7 but lost the partition manager and recory of recovery: How can I get these back please

  I have downloade the HPSA but it does not give me an option for this

  Hey @davvy,

  Here is a link that might help.

  Thank you.