HP Pavilion dv9700 CTO: missing device driver and software pre installed for HP Pavilion laptop PC e

Similar Questions

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• Software device driver has not been installed successfully. __This device cannot start (Code 10).

  I am running Windows 7 on a HP Pavilion a1600n and sometimes in the last month the CD/DVD drive stopped recognizing DVDs and CDs. It is opening and closing, and turn the disc when I put them in the drive, simply do not recognize anything beyond that.

  The State of the device reads that this device cannot start (code 10).

  From what I could find online code 10 was a general hardware error. I tried switching to another Cd/DVD drive and even changed the cable to the inside to see if it was the error, it was not. When I plugged the DVD/CD drive second he tried to locate the drivers online and and informed me it software device driver was not correctly installed. I tried to find some kind of solution online, nothing helps. If there are some ad where this has been previously resolved for someone else and you could point me in the right direction, or if you have a solution to this problem, please help.

  Hi Dnah,

  See the following about the Code 10 error article:

  http://support.Microsoft.com/kb/943104

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP m477fdw: no driver and software for hp pc fax m477fdw

  I bought a m477fdw last month.  When you install the software, the installation program did not show any fax driver and the software must be installed.  I checked the CD and found the driver and software.  However, they were not compatible with Windows 10 64-bit OS.  Then, I downloaded the full version of the software of HP, but finds that there is no fax driver and software in the downloadable version.  This means that HP can't fax from PC to m477fdw?

  Thank you.

  Hello

  Extract and install the driver of HP by Setup.exe following universal Fax below:

  http://FTP.HP.com/pub/softlib/software13/COL60874/DS-146586-1/HPUFDDriver.zip

  Once done go to start > programs > HP > HP Send Fax and add your device.

  You can check the box to add it as a queue at separate printing o your OS:

  Shlomi

• software device driver has not been installed successfully. Digital Still Camera Canon S3IS

  Hello

  Until recently, I was able to connect my canon S3IS to my PC and the device would be recognized and transfer my photos.

  End of week it last stopped. Vista sees the connection, try to install the drivers and fails to this statement: software device driver has not been installed successfully. Click here for more details. The status of details consult the manufacturer of your device to help get this device installed. Digital camera failed.

  I downloaded all corresponding updates of the Canon for Vista 32 bits website. I tried to plug in the camera to other USB ports. When I plug in the camera to the laptop of my wife (Vista 32) the camera picture is recognized and photos are available. I also took the SD card and used a card through a USB Reader and it recognizes the card reader, it wants to format the SD card, which means that he would remove the photos?

  I have all the current updates Microsoft Vista.

  Any suggestions?

  Thank you.

  Hi richardo79,

  Thank you for your message.

  Here's an article that explains the removal and installation of the drivers.

  I suggest using "manually update drivers" section of this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Problems with USB devices?

  Were new programs or hardware installed near this time?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• Replace the hard drive and OS re - install Inspiron One 2330

  Hello

  I had my all-in-one desktop Inspiron One 2330 for about 18 months.  I see serious problems with the hard disk, the system hangs, and the event log is full of HD playback errors.

  ePSA diagnosis shows code 200-0142 telling me to replace the hard drive.  The chkdsk utility runs and sometimes corrects problems and sometimes clean.  Such problems at low altitude, I'm surprised that I can start far enough away from launch internet explore and write this message.

  I called Dell support and they were kind enough kindness to send me the original floppy Windows 8.1 for the Inspiron 2330.  I have a disk hard solid state ready to install, and I saw a bunch of great videos from YouTube that explain how to open the case.  The HD swap is not a big deal, but I have a few basic questions.

  I know that many readers here know the answers.  Thanks in advance for help...

  1. If I install a blank HD in this installation media machine Dell recreates all of these crazy Dell partitions?  I have not of much use for them until I ran the diagnostic ePSA and it was extremely helpful.  I hope that you will tell me that if I do a fresh install, I get a new partition ePSA addition to 8.1 Windows on my replacement drive.

  2. I do not see why this machine won't support a SATA SSD SanDisk brand new instead the 1 TB hard drive that came with it.  Is it OK to use SSD drives in these Machines from Dell?

  3. have good links for the operating system Dell re - install procedure?  I will be installing Windows 8.1 on this drive.  Strangely I find no procedure to re - install step by step operating system.

  4. I have read that the activation key for Windows is now integrated into the motherboard of the machine somewhere.  Do I need to enter this key when I re-install?  I don't see all the stickers on my machine with the key.

  Thank you for your help,

  I finished the upgrade SSD in my Inspiron One 2330 with very little trouble.  Here are answers to the questions for those who find my post using original research.

  1. the Dell Windows 8 installation media disc does not any recovery disc partition, new, retail.  If you install fresh by booting from the DVD drive, you get a nice clean install of Windows 8 without any extras Dell.

  It seems that the diagnosis of ePSA is hosted on the motherboard of the system and not the hard drive.  I have had no trouble to boot in diagnostic mode to run tests of ePSA, even if I see any Dell diagnostic partitions.

  If you install fresh from Windows 8 media you definitely lose the Dell recovery partition.  No big loss.  It is a little strange to wait the software stored on the hard disk to help you recover problems with the same hard drive.  I'll just do another clean DVD media installation if this happens again.

  2. my SanDisk 256 Gb SSD is impressive.  It costs ~ $80 on Black Friday, and now my Dell Inspiron One 2330 boots in 9 seconds.  This is measured from fully powered down for the moment, I type my password to connect.  9 seconds - crazy fast.  Modernization of the best ever.

  3. my internet search found many useful message board posts, some web sites and blogs.  Unfortunately there is no official Dell Reinstall procedure that I could find.  The complete replacement of unplugging the power to see Windows 8 on the screen by using a new SSD was about 70 minutes.  I gathered the information I could find and guess the rest.  Worked for me.

  4 Windows 8 activation code is not necessary for a media of Dell Windows 8 re - install.  The installation process of Windows 8 should be reading the key out of the motherboard because I've never been invited to type one in.

  Here are a few other tidbits:

  5. the Dell Windows 8 media support I was sent by Dell wasn't Windows 8 and 8.1.  I spent more time pulling down of updates, restart and then installing Windows 8.1 on the app store that I did replace the hard drive.  Don't forget: some updates depend on other updates being present.  Really, you need to run the Windows update utility several times to get everything down.

  On the good side of things, my restarts are now long 9 seconds.  I have no problem whatsoever reset to any indication that the system needs to restart to complete the installation of an update.

  6. after obtaining my update to 8.1 Windows system, I installed all the latest drivers for the Inspiron One 2330, which could be downloaded from Dell.  This figure includes a BIOS update which has been a royal pain to apply.  To do this I had to create a start-up separated from 'BACK' USB key.  In fact, it is possible to create this rudimentary special boot using utilities downloaded from Dell drive.  Locate the "diagnostic Distribution Package (DDDP)".  Good luck with that.

  7 Dell backup and restore has been completely useless for the replacement of my SSD.  I have had two drives bootable USB thumb complete with full system backups, the backup restore and Dell refused to restore my data on my Virgin SSD drive.  The error message has complained that my new drive is too small.  It was laughable: my original hard drive was something like 95% of free space.

  8. There is a bonus in all this: by rebuilding your system using the original Windows 8 media, you get a nice fast machine without the excessive Dell bloat-ware.  I do miss the software pre-installed in all.  Glad to get rid of it in fact.

• Need advice on the bluetooth driver and software download

  * Please HELP *: you have just bought a bluemicro Nexus pro bluetooth v2.1 dongle. and Ive has damaged the disc it came with when I was opening the package.

  The disc says: Toshiba bluetooth driver and software bluetooth BT1.2/2/0/2.1.
  Anyone know if there is a download for this online somewhere or I have to go out and buy another? I'm not clued up when it comes to computers and would be very grateful for any help and advice... I; m using windows vista so that it should be compatible.

  Download and support Toshiba page you can download BT Toshiba stack but it's for use with Toshiba laptops.
  You bought non-Toshiba product then download contact Nexus or visit the support page of Nexus.

• "software device driver has been properly installed.

  I have a problem connecting my printer hp deskjet 1000 to my laptop (vista). A message appears to say something as the software device driver has not been installed successfully?

  Thanks for your time.

  Try to delete the file INFCACHE.1:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

  Also check your cable if its not working properly.

  HP support & divers
  http://WWW8.HP.com/us/en/support-drivers.html

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

  This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

• Where can I find a list of programs pre-installed for HP Pavilion DV6 6054ea?

  Where can I find a list of programs pre-installed for HP Pavilion DV6 6054ea?
  A children's program has been uninstalled, and since then, I've lost the normal button "Shut Down".

  Thank you for the information. I find the Web site where you can download and reisntall it program: EasyBits Kids

  Download and install the program to see if that helps you. Please let me know the results. Thank you!

  Mario

• I have pse7 but have lost the disc number - have biotic and want to install in the new laptop-downloaded Adobe but serial no not accepted

  I have pse7 but have lost the disc number - have biotic and want to install in the new laptop-downloaded Adobe but serial no not accepted

  Please check: error: "serial number is not valid for this product". Creative Suite

• HP ENVY 17 t-k000 CTO Notebook: 1missing driver and USB ports Plug and unplug every 5 minutes on the left side

  This laptop has 3 USB ports and the 2 on the left side to keep disconnection and reconnection, but recently it has begun to cut the full power of the 2 on the left even if I use a different mouse it will even turn and I have to use the touchpad. I tested with other mice, and the issue remains the same for the USB ports.

  I was told 2 solutions where I have to reapply thermal paste and take it apart to remove the dust in the motherboard and fans.

  The second solution is to get the driver missing 1 of Device Manager and make install in the hope that the USB ports are linked to it. I reinstalled the USB 3.0 driver and he got one of them then down to 1.

  Power management suspend state link and selective are both disabled so this isn't the issue. And my computer did not freeze or close from overheating what happens in computers with severe cases of overheating.

  Need help.

  DRIVER ID:

  ACPI\INT33A0

  * INT33A0

  Hello:

  I wouldn't be able to help with the driver you need...

  This package provides the driver for Intel Smart Connect technology forsupported models of laptops running a supported operating system. Driver of Smart Connect technology allows system resumefrom mode 'sleep' and update web applications support such asemail. The system enters sleep once the update is complete.

  File name: sp66102.exe

• IdeaCentre B310 WIN 10 missing device driver

  I tried to move a B310 ideacentre to 10 Windows Home for a friend. Everything seems okay except that I have 3 entries of a device driver missing listed under other devices in Device Manager.

  Could someone help identify what it is please and where I could get a compatible driver?

  This is an entry called "Base system device" which appears 3 times under 'other devices '.

  Details of the material under properties for each of the 3 are:

  PCI\VEN_197B & DEV_2384 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2384 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  PCI\VEN_197B & DEV_2382 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2382 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  PCI\VEN_197B & DEV_2383 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2383 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  Nice day.

  This should be the card reader.

  Looking at your pages of pilot: support.lenovo.com/us/en/products/Desktops-and-all-in-ones/IdeaCentre-B-Series-all-in-ones/IdeaCentre-B310

  I see no Win10 at all driver, nor same Win8/8.1 drivers. There are only Win7 drivers for the card reader, but I don't know if they will install in some form of compatibility mode.

  Kind regards.