HP Pavilion g6-1233sl does not support recovery of Crete

Similar Questions

• Pavilion 23-b244 AiO: the system recovery media does not support this computer

  Hey all,.

  I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

  Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

  I think that's why I'm not able to boot to recovery discs?

  Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

  Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• HP Pavilion Notebook (laptop) plugged, G6 does not support.

  Hello

  I bought a laptop HP Pavilion G6 just a couple of months, and I had this problem since the beginning. I looked at some other forums and it seems that many people have had the same problem with the laptop is plugged in, but does not support.

  This problem is really frustrating, as the laptop is connected to the power source and in the laptop, but half the time it is not yet registered as being connected. The battery is discharged. Once or twice the battery completely exhausted (while it's plugged in) and then was charged 100% next time, it was shot on(???!!!).

  Could you tell me if there is some sort of programming or software failure, or if it could be a hardware failure. I have run the checker battery several times and each time he found no problems with it. As the laptop sometimes acknowledges that it is indeed connected (but does not load) personally, I think that it is not a problem with the AC adapter.

  PLEASE HELP ME!

  Thank you.

  (Sorry for the long message)

  Hello

  You can help us help you by displaying the following information.

  1. the complete model number and the laptop Nr - see web document this HPif you're not sure you how to locate the product number or model number.

  2. the full version and the name of the operating system you use (IE Windows 7 64-bit).

  Go to Device Manager. (type device in the search programs and files and click on Device Manager, as shown in the following image)

  

  Expand the device of Batteries.

  Right-click on the compatible Microsoft ACPI control method battery and select uninstall.

  Do the same with the device adapter Microsoft.

  

  After uninstalling the devices, then you can right-click on one of the devices in the Device Manager and select and click on check for material changes.  When you have done this, the operating system will reinstall drivers for the devices.

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• S104nl Pavilion X 360: disappointing with HP, no support forum and HP 800 euro x 360 convertible s104nl does not support the SSD!

  I'm sad and I am disappointed with HP because I have no support in this forum (two question http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-to-SSD-in-my-new-HP-X36... and http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Hp-x360-s104nl-is-compatible-wi... ) and that my HP Pavilion x 360 s104nl of 800 convertible euro... does not support SSD!

  I've tested my new SSD with old Acer laptop, works perfectly, in my new HP x 360 is not recognized!

  Antonio

  First of all it is a user to User Forum. We do not work for HP and HP are not responsible for what is said or not said. Now a version of English language of your maintenance manual is not accessible. Closest I can find is the one that covers models up to 099 and is probably correct:

  Manual

  The x 360 is not really meant to be open and updated by end users and when the laptop was sold to you no one said or implied that change hard drive for one SSD has been supported or allowed while keeping the warranty. You a Crucial SSD of MX200 with no information saying it was compatible and decided to install it.

  Access the hard drive appears on page 29. Yes, any computer that uses a SATA hard disk can use a 2.5 inch SSD SATA. Function properly, but if there is a model that has given the most compatibility problems is the MX Crucial series. Do not know why. Chances are that a different SSD will work very well. My favorite is the Samsung 850 Evo. OCZ made a good whole as PNY and SanDisk.

  This is how I think that the best information that you're going to get. Let us know if you have more specific questions.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• have laptop HP Pavilion dv 1000, formatted, HP site graphics driver does not support Ms 28484, help

  I have HP Pavilion dv 1000 notebook, recently formatted, site graphics driver HP sp 28484 does not support. The message being shown whilemaking Setup attempt is the file does contain no information about the material, put in place closes.

  P/N is EV882PA #ACJ

  Help, please

  Drivers for your laptop by the PN are here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1842107&query=%20EV882PA&

• your processor does not support long mode. use a 32-bit Vmware Data Recovery distribution

  Hi all

  When I tried to start VM in Vmware Data recovery, her gives me error as

  "your cpu does not support long mode. use a 32-bit distribution"

  I tried searching for the 32-bit version of data recovery, but not able to find out.

  Help, please

  Kind regards

  Selim Desai

  You can add a 64-bit host to a virtualized session of ESXi. The ability of VT is not transmitted to a guest operating system.

• Error starting data recovery - "your CPU does not support long mode.

  Hello

  When I turn on the VM data recovery, and after that he begins the boot process, it displays a message "your CPU does not support long mode. Use a 32-bit distribution"

  Data recovery is installed on an ESX 4.0 update1 then the ESX is installed on a VMware Workstation 6.5.2 as a virtual machine in my home test environment.

  My processor is a 64 bit CPU (AMD Phenom 9950 Quad-Core).

  I wonder if this message is because the ESX is running in a virtual machine on the workstation may be that it not only Duke that the processor is a 64-bit?

  Someone at - he of the idea?

  Thank you

  Marcos

  You can run the 64-bit if clients your ESX is a virtual machine. VMware Workstation does not pass through the VT extensions that are necessary for the performance of a 64-bit as VDR host.

• Norton AntiVirus 2005 does not support the repair feature

  Hello

  I ask for help I always get this message error/dialogue:
  "Norton AntiVirus 2005 does not support the repair feature, please uninstall and reinstall"
  along with
  "Please while Windows configures Norton AntiVirus 2005"

  Use the product Recovery CD from TOSHIBA L20? This will affect other tools than Norton?
  Just for mentinon, I have a dual boot linux/Windows.

  Thanks for your reply.
  Kind regards
  Eliyah

  Hello

  I recommend to check the tips on the Symantec Norton:
  http://Service1.Symantec.com/support/NAV.nsf/docid/2004090712504306?OpenDocument&LG=en&CT=UK&SEG=HHO& src = eu_hot

  > Use the recovery CD to the L-20 TOSHIBA product? This will affect other tools than Norton?
  The use of the recovery CD will set your laptop to original settings.
  I mean, the recovery CD will format the whole HARD drive and will delete all your files

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• G7-1368dx Pavilion: Pavilion G7-1368dx does not recognize my ssd.

  I have problems to an ssd added to my computer.

  I tried two more different: 530) 1 Intel series-256 GB and 2) Crucial Mx100 - 512 GB.

  The Crucial drive is the one recommended by the tool of their compatibility.

  I tried calling HP support but everything what they told me was that my computer does not support an ssd and I think they're wrong, as I read messages like this http://h30434.www3.hp.com/t5/Notebook-Hardware/Does-HP-G7-1368DX-support-SATA-III/td-p/2798639http: /...  where Sergiy already has one installed and works.

  I tried several different softwares, tried tried cloning backup all seem to succeed but the when the drive is installed and I try to start I do not found disk errors.

  I also tried to use HP restore disks that I created with the HP recovery tool, they are unable to find the drive either. Even an iso of Win7 directly downloaded Microsoft can't find it.

  Thanks in advance.

  This is to help nothing else out there if they have a similar problem with ssd is not seen on the hdd0 port, but that a regular hdd works fine.

  Get a motherboard replacement for SATA cable. For some reason, one that came with my computer would see a normal hard drive, but not just any what SDS (I tried 4 different brands, so it wasn't a thing of brand).

  

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.