Satellite M35X - won't start not

Similar Questions

• Satellite L500D won't start

  Hello

  My Toshiba Satellite L500D won't start.

  When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

  I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

  I hope someone can point me in the right direction

  Buddy

  Hello

  Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
  It will be interesting to know what you did with your computer laptop last days.
  Have you installed some day or anything that may be responsible for the issue described?

  Update the BIOS maybe?

• Probook4540s: 87% charged battery, won't start not computer.

  87% charged battery, won't start not computer. When power plugged in and started it shows not charging. If I remove the power cable, stop immediately.

  There are several complete responses with the steps to follow, which I did. Finally a new battery of bouht and considers the motherboard bringing not at not charge. The sending of the stack of return for credit.  Will just have to use with the power supply.

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• Satellite P300 - 13 M start not at all

  Hello everyone,

  My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

  When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

  This means the end of my laptop?

  Please help me as fast as you guys can't because it's my only laptop work.

  Thank you very much

  PS If you want specs, then I can't give you their. I don't know the specs by heart.

  > This means the end of my laptop?

  No doubt :(

  But try this: remove the battery and ac adapter
  Leave the laptop disconnected for a longer period of time (a few hours)
  Then press the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and try to turn on the unit.

• Re: Satellite L670D-102 will start not until after 8 GB RAM Installation

  I went out today and bought the 2 x 4 GB DDR3 ram bars - 8500 the correct ram for my laptop and now I installed the two ram laptop won't start I checked the ram max that can hold the laptop and it is 8 gb that is why I went out a bought the 2 sticks of 4 GB and I had to for this purpose of the 8 GB of ram in total the laptop will not start when the two 4 GB sticks are installed, but when the ram is installed as supplied with the laptop it starts and it starts as if I have the ram that came with the laptop and also one of the 4 GB sticks.

  I'm really nervous as to why it does not work I am 100% sure that ram is good because it starts up with one of them installed aslong as the stock ram is installed, someone knows what the problem please?

  What brand did you buy?
  On this forum you can find many threads where people describe similar problems using the memory modules. Specification is OK but unfortunately work doesn t mobile.

  I can only recommend to use tested 100% and 100% compatible modules.
  Best modules are certainly Kingston modules and 4 GB of RAM for your laptop model KTT KINGSTON part number - 1066 3/4 G (Toshiba PA3677U-1M4G).

  Check it out.

• G580 - laptop won't start not

  I had purchased lenovo g580 core i3 a year ago. 2 days, after closing my laptop, when I tried to turn it on, screen appeared at the beginning, but not usual lenovo can't anything after that. It crashes without giving a answer... There is 2 option or press F2 for Setup and F12 for the boot menu. but nothing is happening, even when I press the buttons. someone help me please

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I suspect that your HARD drive has a problem, generally, it's like that, it won't start if the HARD drive was fried on you, try a key recovery to restore as long as day 1. Otherwise, buy a slap of casing 2.5 drive your hard drive inside, save the files after reinstall windows 8 or make the one key recovery.

• HP Pavilion won't start not

  Hello

  My HP Pavilion (info below) is does not start. She asks the system repair CD I bought them at HP but the system is still not recognizes them and won't start do not. I have run all diagnostic tests (hard disk, memory, etc). All the great test, no problem. Suggestions:

  Model number:

  LW407UA

  Description of the model:

  LAPTOP HP PAVILION G7 - 1113CL

  Serial number:

  [number of Series edited by Moderator]

  Creator:

  RYYCEBL

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as coming from a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select the Boot Menu options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• Foglight - won't start not

  All,

  I just installed Foglight on CentOS 5.5 x 64, 3gigs, i5, lots of disk space. I took the default for the fms_silent.install installation except that I changed this path / opt.

  He has pulled up without errors and tracing the administration log server it is right here-

  2013-04-23 14:25:27.046 INFO [main] com.quest.nitro.startup.StartupConfigLoader - Forge Server commissioning using the HA Pooled Invoker port: 4446

  2013-04-23 14:25:27.046 INFO [main] com.quest.nitro.startup.StartupConfigLoader - Forge Server commissioning using the port of HA JNDI UDP Auto Discovery: 1102

  SELinux is disabled is the firewall. No idea why it won't start?

  Hey guys,.

  I did not open a case of pension since he was a lab/demo machine, I was put in place. I understand however, it turns out that was my typo in my hosts file. (once again, laboratory envionment, no dns server).

  Thanks for all those that Chorus.

• InDesign won't start not due to a lack of permissions to write in the settings file!

  My Indesign CC2014 won't start.

  I get an errorwindow saying "Indesign could not start because you don't have permissons writeing in the Indesign settings file. Correct the problem and restart Indesign. »

  Where is this file which is located?

  I have no problem with other CC-programs, they work very well!

  Someone has experienced this problem?

  See replace your preferences for folder locations and does not start under new inDesign CC | Adobe Community for instructions to set the permissions on the Mac. Procedure is similar on Windows.

• VMware Virtual Infrastructure Web Access won't start not

  Hi all

  I'm a little puzzled. Yesterday my vmware server 2 was working fine, but today it does simply not at all. Or rather vmware server seems to work, but web access won't start so I can't access it.

  I created a log of errors of the problem by changing the start of web access line in vmware-mgmt to send the log to a file instead of dev/null and the result which is attached to the file. I can't make heads or tails of it, but I hope someone can help me. I have re-installedvmware Server 2 times, but it does not help.

  The host is under ubuntu 9.04 and the guest is windows xp. As I said, everything worked without problem yesterday, but today it won't work/start.

  Hoping that someone will know what to do!

  Hello

  Perhaps with the failure, vmware server became unstable. Then put back in place a clean vmware server is necessary.

  To do this, all you need is to run ' vmware - uninstall.pl ' and then do a clean install using the script that I told you.

  Remove it and install check is all vmware remains of zombie process in running and kill them.

  You will not lose the virtual machine, but are always a good idea to make a backup. During the installation of vmware server all you need is pointing to the directory containing the files of the virtual machine.

  If you have problems with vmware vmware hostd.log and/var/log/vmware proxy.log after install the own reach and we will check.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Satellite L300 intermittently won't start not

  My Satellite L300 intermittently does not start.

  When trendy DC, light power plug is green, when you press power button / stop power light is Orange boots for 3 seconds with fan started done 2 short beeps and then the fan stops and no other shoe.
  turn off the DC supply then plug again before may give him another chance.

  This can happen up to 20 times, sometimes around 3 or 4 attempts.
  When he wants to finally go, pressed power light power button green and all is OK.
  That means the light Orange?

  I checked for dust in the fan, used another power supply, tried friends memory and hard drive.

  The problem can occur every day, or every day.

  I left the battery in case it appeared the problem, the battery will not hold a charge very long.
  I would be grateful of any advise

  kevsim

  > That means Orange light?

  If power light flashes orange, it indicates the power was cut off, while the computer was in mode 'sleep'.
  But in your case I n t think that the laptop enter mode 'sleep' in your case, the power LED flashes means a hardware problem may be detected

  Perhaps your motherboard is affected

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• Satellite L450D-11V - Windows won't start not

  I'm unable to start Windows. I pressed f8 and tried all options. I tried the Startup Repair which just goes to a black screen. I tried the product recovery disc, and I just went to a black screen with an arrow. I have my own recovery disc I made last month, that does not work either.

  Any help would be appreciated.

  Jude

  (The trouble started after an error I think it was a problem with wmv.dll?) I saw the message briefly so my memory is perhaps faulty)

  Enter the Bios (f2 at startup) to check if the hard drive is recognized

• Satellite M45 won't start at all

  Greetings! My Satellite M45 seems to be really sick! It started a while the battery dies slowly, and finally, the laptop would refuse to go into the BIOS to the battery power.

  I ordered a new battery (which I'm still waiting) and continued to use the computer laptop external power, but every now and then, he would refuse to boot from an external power supply.

  When you press the power button, the screen 'TOSHIBA Touch with tomorrow' arrives - but with a problem - then crashes (with the fan). The problem (other than the hanging), is that the screen is 'moved' to the left. Rather than fill the entire screen, the start screen "ignores" the rightmost 2 inches and a half inch low and appears in the rest of the screen. Its a little hard to explain...

  This morning, refusing to boot at all!

  Any ideas? I tried to reinstall the ram, turn on/off without battery, only on the battery, I have removed all the 'extras' and am quite a loss now!

  I can't go to the menu of the bios either - so its very frustrating!

  Any help would be great!
  Michele

  Hello

  This s a shame! Description does not sound you well ;(
  For most hardware is malfunctioning if the laptop is unable to successfully pass the TOSHIBA Touch screen with tomorrow!
  Seems the POST (power on self-test) failed!

  I think that there's not a lot to do! The laptop must be professionally checked by an authorized technician. Guys might start and run tests from diagnostics and could locate the source of the fault.

  Call the ASP in your country and describes the history and details. I guess you will have to send the laptop to the service provider authorized ;(

  Good luck