HP pavilion g6, shuts off and now I doesn't

A few hours ago, I close the lid of my laptop. It is not defined for sleep, shut down or Hibernate when I do this. I tried to open it back up earlier, and he had apparently closed. But no amount of withdrawal of pressing or button battery provoked a response. At least, that is what I thought. I noticed that everytime I press the power button, input of light between the USB port and plug power cord flashes white three times. Of course, there is little life in the thing, but HOW do I GET it TO TURN ON?

The blinking led could fail mention battery, especially if you notice that it does not load while the laptop is turned off...

Is your laptop still under warranty? Warranty web status document

If Yes, contact HP for warranty repair.  (This is likely to lead to the replacement of the card system)

Kind regards
ERICO

Tags: Notebooks

Similar Questions

  • iPhone 5 s: green screen, shut off and now won't turn on

    Hi, I have reviewed to answer but didn't find any.

    Last night when using my iPhone, DO NOT watch a video, my screen turned green then black. I could see that he was always so I tried to reset the thing by activating the only two keys got my iPhone! He's dead. I repeated the experiment for 20 minutes on my way back. I tried to connect it on the computer so I could reset it from here, but my calculation tells me that it's locked! OF COURSE, HE'S DEAD. At one point, I don't know what I did, but he told me that if I wanted to restore it so I said yes!

    Then I had to go to work. Came back this morning, apparently nothing happened, could not find the way to restore and my phone is still dead.

    HELP SOMEONE.

    Hello there Noemiie674,

    Looks like you are unable to turn your phone over all. I would check that you have done everything that you can in the following article, but very well you may need to service on the device at this point:

    If your iPhone, iPad or iPod touch does not illuminate

    Thank you for using communities of Apple Support.

  • Satellite U400-14 b turns off and now it won't start

    Hello

    just got a new Satellite U400 this week.
    Worked perfectly the first days, and then last night, it just turns off and now it won't start.

    I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
    I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

    Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

    The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

    help please...

    Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • Qosmio G35 display shuts off and won't turn back on

    After sitting for some time an hour or more generally the screen shuts off and no button can't seem to get the monitor to turn back.

    The Qosmio G35 still works and every once in a while, the screen turns on, but I don't know why.

    Have you tried to update the display driver and BIOS?

    I read about a similar question in this forum and especially a BIOS update and update the graphics driver helps solve this problem.

    Good luck

  • Computer shuts off and comes back over and over again trying to open a session

    Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
    Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

    Hi bonnieb1941,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. How have you tried to run the virus and bug checks?

    4. is this the machine is disconnected and re-login in back or just reboot?

    Step 1:

    If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

    b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

    Check the link for more information:

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2:

    Also, try unplugging the external devices connected to the system and check if the system boots normally.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • KDL-46XBR9 shuts off and the power light flashes red

    KDL-46XBR9 shuts off and the power light flashes red

    It flashes ten times, then rehearsals.

  • Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

    Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

    Hello

    This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

    http://support.Microsoft.com/kb/947366

    Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    or repost in the Windows Update forum link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Laptop shuts off and turns on when I close the lid

    Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

    Hi Biliou,

    Welcome to the Forums of HP Support!

    If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

    I hope that this helps, please let me know how it goes.

    Thank you and have a great day!

  • Restored my HP Pavilion to factory settings and now when I turn on the computer starts a recovery to start, then he can't find something wrong and want to do a system restore

    I have a HP Pavilion with Windows Vista.  Friday night, I restored the computer to the factory settings.  After doing what he started back to the top as usual and was very good.  I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore.   Does anyone know why it would start this resumption of start after that I just restored it?   I'm ideas... Please help.

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

    You restored your computer for some reason any.

    And now you have problems after using the HP recovery process.
    It seems to me that you might have another problem inyour computer.

    Problem with HP Recovery Process(during or after), contact HP.

    It's Recovery process HP, not Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Help! installed new motherboard Pavilion HP G6 laptop and now having battery problems

    I have a G6 pavilion with a new motherboard that works very well until I have unplug and he turned off the light on the battery or the power led on the right side next to the power connector remains solid when powerd completely out of what may cause this problem? The battery is also not appearing not but fresh. If someone could help me, it would be greatly appreciated thanks.

    I understand the motherboard was replaced, and now there is a battery problem.

    You have already bought a new battery, which seems to exclude from the battery as the source of the problem.

    Was it a real or a third party battery?

    What was the initial question that lead to the replacement of the motherboard?

    The replacement motherboard came with a guarantee?  To be honest, it sounds like a problem with the motherboard because it was not present before the change of motherboard.

  • Pavilion g6 turned off and will not turn back on

    My g6 kept turning off unexpectedly, and now it will not even turn around.  Help, please.

    The fire being orange means that the computer is "charge" of the battery.  If it is always orange and never goes back to white then there is something wrong with the battery because it is not that it is fully charged and the continuous computer to keep it loads or not related that she stopped.  This could be a battery problem or a problem with the computer loading mechanism.  It's probably more with the battery what either.  If you can get the computer to boot with the battery and you can get the HP utility Center to open, you can have it run a test on the battery and give you information about your battery.

  • Help! Lenovo B570 random Shut off and Start Up problems

    My Lenovo laptop B570 has had problems lately. It is only a month, but has frequent problems.

    My first question is that it stops randomly no matter what I do. I will be checking my email or anything else online then the screen is black and the power light is off. Happened almost every day, and I'm going to College soon so I don't want to cut when I anymore.

    My second problem is that sometimes when I start the laptop, either normally or after the random shut off, it will not connect properly. Sometimes I use the fingerprint reader or type in the password. It will say 'Welcome', then it will say "Please wait", but it will not disappear no matter how long I wait, and I left for 20 minutes like that before.

    My third and final question is whether the laptop freezes sometimes or all programs cease to operate and remain unusable. When I am able to boot successfully and connect, I open any program, and it will open, then immediately, it will say "not responding". When this happens, and I click anywhere else, everything becomes unusable, even the start menu.

    My solution to all these problems was to hold down the power button until the laptop turns off, start it in Mode without failure, then restart. I installed McAfee antivirus and Malwarebyte anti-malware software and scanned the whole laptop, but there has been no detection with either. If anyone has had similar problems, or has a solution to my problem, I want to say thank you in advance.

    material or heating problem. try bios flash update, if you access windows otherwise call lenovo support line.

    http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=91249

  • After leaving the screen saver, display shuts off and change to select the user account screen

    I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

    Please provide the solution

    Hi Sam,

    Sorry for the late reply.

    I understand that when your computer is left idle, the select user screen appears.

    The issue can be caused if the power plan settings are incorrect.

    To get a better understanding of the issue, I want to know:

    1. What is the brand and model of your computer?
    2. You did it changes on your computer before this problem?

    To resolve the problem, try the following methods:

    Method 1: Troubleshooting to be able to run.

    The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    After trying method 1, if the problem persists, try Method 2.

    Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

    Method 2: Change the screensaver settings.

    I suggest you follow also the suggestion given in the answer by Vijay B answered the

    May 14, 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

    Please, try the above suggestions and we provide the information required so that we can help you.

  • an audio update for my laptop, but it doesn't have a chance to finish and now audio doesn't work

    I have a HP Pavilion dv6 Notebook PC with beats audio, but then the update has not finished downloadng stopped working and now a whole bunch of programs audio not working need help

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • I got Foxfire and now it doesn't work and I get Yahoo search?

    I'd give sinusoidal with Foxfire and now don't come don't not upward and I get a page which only shows Yahoo... .and Outlook indicates there
    a problem?  What happened to Foxfire?

    Hi Rosemarie;

    Welcome to the Microsoft community. According to the description, you are unable to access Firefox. Provide the following information:

    ·         You get the error message?

    ·         Did you do changes on the computer before the show?

    ·         The issue is limited to any particular Web site?

    I'll help you with this problem. I suggest you follow these methods.

    Method 1: Follow the steps in the article.

    Firefox does not start - solutions

    Method 2: Uninstall and reinstall the application.

    If the problem persists, contact Mozila support for assistance.

    I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

Maybe you are looking for

  • http: this Web site provides information on the property. solve the

    I am the owner of the site and have been for the past eight years. I hope that my company is considered responsible and honest. I would like to stop Firefox giving a warning that I can fix it. So, how to provide "information of property? What firefox

  • Opera for 10.8.5

    Hello Some Web sites don't support more Safari 6.2.8. Firefox, Opera and Chrome have been proposed by the sites for security reasons. I'm not a fan of Firefox. Opera works well with 10.8.5? I have downloaded but hesitate to install without the input

  • HP pavilion dv 2700 notebook: driver coprocessor missing after clean windows 8.1 installed

    Original operating system was Vista.  Then uped to 8.1, worked great, although missing some programs.  Windows 10 resulted in a very poor video playback.  Tried to goback to 8.1, did not work.  Hard disk formatted, installed then 8.1 full version.  N

  • It is not an option to select the registry editor

    original title - same topic-other problem When double clicked on addspooler.reg & open with is selected, there is no option to the registry editor select. You said there was another way - that was my question. Thanks for any help.

  • Cisco Aironet 1830 disable broadcasting of the SSID

    I recently bought a Cisco Aironet 1830 with the mobility Express version. installed 8.2.100.0. This unit is my controller and my only AP. I configured the device, but I can't seem to find a setting in the GUI or the CLI of the controller or AP disabl