HP Pavilion Notebook PC g7 not sound
I have a HP Pavilion Notebook PC g7 and the other day my mute and I checked the driver and he said it's very good so I'm trying to figure out what could possibly be the cause I have no sound
Thanks for the information,
Here is a link to some troubleshooting steps for the sound problems in Windows 8. Follow the steps in the link and it can help with your problem.
How long the sound did not work?
Tags: Notebooks
Similar Questions
-
just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?
just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?
Hello
The following link shows its specifications:
http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =
No speaker. Please try the following Nice monitor:
Kind regards.
-
HP Pavilion Notebook: microhpone does not work with jack 3.5 mm in the drop-down list
Hello! My laptop has a 2 in 1 combo (headphones and microphone) and I recently bought a new external microphone with a 3.5 mm jack plug, but when I try to use it with my laptop it acts as an audio output instead, and device if poster not can under my audio device management settings.
How can I use this external microphone without having to buy a splitter?
Forget it, I just bought a microphone/headphone splitter cable. Here is hoping that it works, cus, I spent a little over an hour on the phone with technical support only for the me saying "this is not something that they lead us on. I'll transfer you to a service that can help you. OH, BTW WHO IS GOING TO BE A CALL FOR $99.99! »
So, in short, I'll let you know if the Dispatcher works or not.
-
Pavilion Notebook 15-p204na: not found boot device
I get the folowwing message:
Not found boot device
Please install an operating system on your hard drive
hard drive (3F0)
I did a restore default BIOS, but it did not work.
@Ram14: see is something in the linked thread help: ' Hard Disk - BootDevice (3F0) not found "error - HP Support Forum's - 2443931
-
HP Pavilion Notebook g6: mousepad not working
Hello! Yesterday I was I have on my laptop and I closed it to go outside (mousepad worked) then when I came back I had on my laptop and the mouse would not move for us are my finger has been, and it clicked. I tried the drivers update and installation with the keys and I tried the FN and F5 stuff, but nothing works! Help? Thanks in advance!
Dear customer,
Welcome and thanks for posting your question on the Forum of Support HP
Looks like you are facing difficulties to solve problems with your laptop Touchpad
We will surely help you with this
Steps to drain the static charge and load the BIOS default settings to solve the problem
Step 01. Turn off the laptop
Step 02. Disconnect the power/AC adapter and also remove the battery too
Step 03. Press and hold the power button of the laptop for a minute
Step 04. Now re - insert the battery back in and plug again the power supply/adapter
Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS
Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS
Step 07. Now press ESC/ESC. Save Changes and Exit - Yes
Step 08. Now, please wait until the unit load the Windows operating system
Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support
Please click on this link to find several troubleshooting steps to solve this problem
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP
-
built in webcam on HP Pavilion notebook dv6608ca is not detected
My integrated webcam is not functional and not sure what to do... any help?
Hello
Check with HP Support, their drivers and documentation online and ask the HP
forums for known issues.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/---------------------------------------------------------------------------------------------------------------
You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
-
HP pavilion laptop g7. Product No.C5G29UA #ABA.
Don't sleep on its own or on mains or battery. He goes to sleep when you touch the power button or startup, shutdown, sleep. The screensaver is off and it is fixed a recommended power settings.
Hello
Please find the link given below might help you solve your problem.
-
HP PAVILION NOTEBOOK PC - sound G6 does not work properly, "crackling".
Hiya,
The laptop was having problems, so I nuked it and reformat the hard drive and reinstalled Windows 7 64 bit. I downloaded the drivers for audio here - http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-g6-1200-notebook-pc-series/5145704/model... I didn't know that was what I wanted for the sound itself for the speakers, so I downloaded each, uninstalled the previous until I had some kind of result, the one who gave me a result was "IDT high definition CODEC. When I click on test in reading, she sometimes plays nothing but another time parts of the carillon will play and cut, in a sort of crackling. Videos YouTube do not seem to want to play either, so pilots himself seems to have installed, but obviously it does not work as expected, so I'm stumped on how to fix it. Little help would be much apprechiated.
HP Pavilion Notebook PC g6
Product number: A7D64EA #ABUSince I am from a tech background, I think that its in my best interest to give the same kind of help that I would see when I googled these questions.
Many thanks to @Dvortex who, in a different thread, gave this advice, which totally fixed my problem. I hope this helps someone coming through this.
Go to Device Manager (you can give a right click on the windows logo on the lower left corner of your screen and select Device Manager from the list)
Now to maximize the "audio, video, and game controllers" in the list. You will see the audio driver. Right click on "IDT high definition audio CODEC" / "Realtek audio CODEC" and select "Update driver software".
Choose "Browse my computer for driver software" - choose "Let Me pick from a list of drivers for devices on my computer.
Select "High Definition Audio Device" (not IDT high def... or Realtek High Def... This is important) and click Next. You get a warning message but answer 'yes '.
Once windows have updated driver software, try to play the audio again and check.
-
Pavilion laptop 15-p-141ne: audio beats does not not on win 10 pavilion notebook 15-p-141ne
I have HP pavilion notebook 15-p-141ne, but after that audio 10 beats windows does not work I tried to install the driver of win 8 but little still an error please help
Hello
Try the following.
Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe
When finished, press and hold the Windows key and press R
In the run window, type devmgmt.msc and press to enter.
In Device Manager, expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe
When the reinstallation of Chipset has completed, restart the laptop.
When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. Once this done, reboot the laptop and let windows load completely for a few minutes before checking.
Kind regards
DP - K
-
HP Pavilion Notebook PC g7 - The Audio Service is not running
I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?
HP Pavilion Notebook PC g7
#ABA product number A6Z29UA
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
Once this done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
No update sound after BIOS on HP Pavilion Notebook g6
Hello
When I booted up my HP Pavilion Notebook g6 today he says that there is an update of the BIOS necessary. I upgraded F.34 (at least that is what it is under my profile), it restarted and all is well. Then I noticed that it had no noise at all. I checked everything, fait made sure that my drivers are up to date, ran troubleshooting and still nothing.
Windows detects the sound being played, but nothing comes out of my speakers. I also tried to use headphones and not had much luck.
My # is LM837AV product.
Thank you.
I solved it.
The Solution was a hard stop.
-
HP Pavilion Notebook - 17-f250: new SSD not recognized, Pavilion 17 AMD drivers
Hello
I bought the laptop (HP Pavilion Notebook 17-f250) on September 2015 and this September 2016, I decided to upgrade with a 2nd SSD.
I bought a caddy, placed my SAMSUNG EVO 850 PRO inside, removed the optical drive and then place the CART inside the laptop. It fit perfectly, no problem there.
But Windows does not recognize it at all in MANAGEMENT OF DISKS.
It is not here in order to format it, etc...
My IDE/SATA appears as "AMD SATA CONTROLLER".
I can not find anywhere no possibility of enablev AHCI etc... My BIOS is not an option to check if the AHCI drivers are enabled or not.
With the AUTOMATIC DETECTION is my driver: AMD APU A4-6210 with graphics AMD RADEON R3.
My operating system is WINDOWS 10.
FYI, I bought another same SSD for my office and worked smoothly. I only have a problem with my laptop, and I can't figure out how to recognize the Windows SSD!
BR,
Dionisis
What caddy you bought? There are a lot of these on the market and some are not made with the highest quality control. You may have it tested with another hard drive?
Second, the interface for the optical drive is SATA which is ahci. The drivers are not the issue.
Finally, put an SSD in an optical drive is a little excessive spending from one optical drive interface is slower, so the speed of SSDS is wasted. It would be much better to put a regular hard drive large, slow in the optical Bay for storage. Having an SSD in there won't be fast in all directions. Also, a disc in an optical Bay will not be initiated.
-
HP Pavilion Notebook 15-p119: HP Pavilion Notebook 15-p119 do not close completely
Hello.
I checked the forum for this question, but the questions that other users have slightly vary from my problem.
My laptop: HP Pavilion Notebook 15-p119
I recently installed an official Windows 10 OS on the laptop (64 bit). It was fully installed from scratch.
Everything seems to work fine except for a very annoying problem: whenever I say the laptop shut down it proceeds to stop never totally as normal until the screen is blank (as is normal), the light on the power button turns on and the machine stops. It remains in this state until the battery sinks and dies. The only way to shut down the computer at this stage is to press the power button until it is difficult to stop. When you start the computer again, all right, and there is no bad effects of the hard stop down.
When he is in the State where the screen went blank and the indicator light remains on, it is not not clear if Windows is running or if Windows has closed, but the computer itself is still ongoing.
Help, please
Hello
Suggestion of his grueling value HP Expert of David here:
http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/shutdown-problem/m-p/5564084
Concerning
Visruth -
HP Pavilion Notebook 14-e042tx: Card Reader Driver for HP Pavilion 14-e042tx does not
Card Reader in 14-e042tx-HP Pavilion Notebook PC - Win 8.1 works do not and I need I need the driver for this.
Need help please.
Thank you
Delphin Gani
Hello:
Try the driver directly from Realtek.
First driver on the list...
-
Hello
I have a HP Pavilion Notebook 15-p219nt which has been reinstalled with Windows 7 (it came with 8.1)
I can't find the Driver for the Touchpad for Win7 OS. Is it true that it does not support Win7?
Thank you
Anders
Try the following directly from Synaptics driver.
Be aware that it won't give you all the features that was present in the newer operating system drivers.
Maybe you are looking for
-
Can what audio sources I use in iMovie?
In iMovie, can which audio sources I use? I find that only iTunes songs appear. Can I use music from a CD?
-
HP Officejet 8610: Black lines
I changed the cyan ink (because it was empty. It now prints PDF as black horizontal lines. All normally prints excel, word, outlook documents and internet pages and forms.
-
I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I hav
-
SSRS 2012 export to CSV with no data by generating coma separated with an empty value
I have a report that have no data due to parameter motor (both have true noheader configuration). In SSRS 2005 its generate empty csv file and for SSRS 2012 his record still generate with coma and an empty value, something like this: ,,,, Those that
-
as programa puedo bajar promotional videos los of the worm para are only in windows player el no lo puedo hacer y that the sea compatible. Gracias.