HP Officejet 8610: Black lines

Similar Questions

• All-in-one Officejet 4630: black lines at the copy and acanning

  Hello... I just bought this all-in-one today, and it is printing very well.  The problem is with the copy and scan.  No matter if I place the original on the scanner or the top of the page, the result is the same... sheet is covered with black lines of variable thickness, running up and down the page, while the details of the actual document are barely visible underneath (or colored lines if I select color printing).

  Not an expert tech by any means, so hard to solve this problem.  Have re-installed... rebooted the printer cartridges... try to print with a cartridge installed... nothing work so far.

  Any help or advice is welcome and appreciated!

  Hi @D_Corbs ,

  I see you got black lines during the scanning of the bucket and the ADF. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, please update the firmware of the printer. E-all-in-one printer drivers HP Officejet 4630.

  If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Contact HP.

  Have a wonderful day!
  Thank you.

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8620 shows a black line on scanned documents

  I have an Officejet Pro 8620. Just bought two months ago and everything was fine. I scanned just, however, an element through the feeder and it has a verticle black line subject to halfway, going down the whole page. What can I do to fix this? This is not the case again using the dish.

  The question that you see is caused by a small spec on the glass of the scanner ADF, thin glass just left of the main bed.  Clean this area as on the solution three of the document here.

  I found that shining flaslight parallel to the glass of the ADF can highlight the spec, it may be difficult to see.

• thin horizontal black line down page what scan on HP Officejet Pro 8600 more

  I've owned an HP Officejet Pro 8500 and scan was perfect.  I recently bought a HP Officejet Pro 8600 Plus.

  When I scan from the ADF HP 8600, I get a thin (several pixel wide) black along the lower edge of the analysis that results.  This line will be sometimes slightly twisted or appear only through half of the page, in which case, it tends to become thicker towards the edge of the page).  According to me, this line is an artifact of the analysis of the edge at the bottom of the original document.  I think it is to show where the bottom edge of the page was when parsing.  If the document is that a little offset, then the black line down will be a little twisted, probably following the edge of the page.  This issue is consistent and reproducible.  It is in the mode "Scan mail" and in mode 'Scan To Network Folder.

  When I scan from the flat bed, I get a very narrow black line along the side of the analysis resulting very superior, but the background seems in good condition (although I have not tested this widely).

  These fine black lines occurred when scanning the HP 8500.

  I wonder if there is a setting to adjust it, or if it is a firmware difference between printers needs debugging.

  Hey KenAlker,
  
  There are a few things I want to check if you have lines when scanning using the 8600. I see that mention you that lines appear both through ADF and flat glass. There may be something both of the glass sections used by this printer, but more often that otherwise, this isn't the case.
  
  I would check if the printer is connected to a surge protector. If this is the case, then try plugging the 8600 in a direct outlet. Often the surge protector can cause this problem appears because the printer has a built.
  
  Also, try a hard reset:
  * Unplug the unit while the
  Disconnect the other end of the wall socket direct
  * Wait 30-60 seconds
  * Plug the unit to the top
  
  Also, try to take a look at the steps in the document found here.
  
  I hope this helps.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• I have a HP Officejet Pro 8600 and when face I get a thin black line

  HP Officejet Pro puts a thin black line on my pages

  Hello

  You are able to print a self - test page, or print a document - you get the same black line when printing.

  You try to copy from the glass of the scanner or automatic document feeder?

  If the printout is fine without the black line and the problem only occurs when you copy - follow the steps mentioned in the document.

  http://support.HP.com/us-en/document/c02881567

  Although I am an employee of HP, I speak for myself and not for HP.
  Click on the star of CONGRATULATIONS on the left to say 'thank you '.
  Please check one response to "ACCEPTED solution" if it has solved your problem, while others may find it.

• OfficeJet Pro 8620: ADF Scan black line down

  Hello

  When I scan documents using the ADF, I get a black line at the bottom of each page (only the right side of the book). I tried to clean than the small scanning area - but I still get the black line - any idea how to get rid of him?

  You can download a sample scan pages virgins og here: https://files.secureserver.net/0s4RbMeFgHa3lX

  I just wanted you to day.

  After replacing the printer OfficeJet Pro unit 8620 3 times (when having tried 4) and I tried a HP Officejet Pro 276dw with the same problem, I ended up cancelling my order and get my money back.

• HP Officejet 7000 Wide Format print black lines on photos

  HP Officejet 7000, model # E809a, began to print horizontal black lines, at equal distance about 1/2 in., through photos.  I ran a cleaning cycle that showed felt clean, without burrs, without black lines.  Please advise...

  Hello MerlotLady,

  The lines are clearly visible and look like, they are caused by the inkt not bleeding very well through the paper. In this case I advise to use another document. I checked the HP website for you and HP recommend the advanced use of paper. If any kind of HP Advanced paper will do, either gloss or high gloss as long as it's the HP Advanced line. A copy of the recommendation below. If this will still not solved the problem, best thing to do is contact your local HP support. Let me know if it helps.

  "Advanced photo paper.

  Best for printing with HP 02, 38, 60, 110, 564, 920 or 940 inks; «you get vivid, dry instantly, stain - resistant and water - photos»

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• OfficeJet Pro X476DW: Scanner ADF black line down Page

  I had problems with scanning from ADF. There are two black lines coming to the bottom of the page on the scan. This does not happen when I scan directly on the glass through the bedfeed. I can't understand what needs to be cleaned or replaced. Help, please.

  Thank you.

  Hello and welcome to the HP support community!

  Open the lid of the dumpster and look at the extreme edge (usually the left edge, but it is where the paper feeds down).

  You will see a small glass to crack running the width of the flat glass.  Look inside this crack for a few pieces of paper/dust/something who lines up where the black lines are formed.  Use a can of compressed air or a brush to gently remove anything found.

  When using the document feeder, scanner actually itself parks under this tiny slit of a window and scan the document as it feeds on.

  I had this problem before on my OfficeJet Pro 8600 and found the solution here on the Forum.

  HTH,

  WyreNut

• OfficeJet 6500 - flat scan creating black lines on output?

  Hi all

  I just bought an Officejet 6500 E709a Series and when I scan a document via the scanning to plate/sheet feeder tray, I get a number of black lines in the output? This problem exists when I use the flat and not the static mode of glass?

  Any ideas? Thanks for the help.

  http://support.HP.com/us-en/document/c01658811

  This article describes how to clean the glass Strip in the autoloader of documents (ADF)

• several vertical black lines trying to copy using automatic power HP Officejet Pro 8600 N911a

  30 - 40 randomly spaced verical lines length of page when you try to copy using automatic feeder

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 n911a.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.