HP Pavilion P6746DE: Howto activate Options BIOS fan

Similar Questions

• Pavilion 15-bc004nt (X0L73E): HP Pavilion 15 - bc004nt (X0L73EA) have Double-Fan?

  Please help me... HP Pavilion 15-bc004nt (X0L73EA) has he fan, Double or Single?

  Hello

  An image says thousands words, it has 2 fans:

  

  You can find this book from the link shows, article #2:

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/10862166/model/11792366/manuals

  Kind regards.

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• My Pavilion HPE h9 - 1120t Phoenix Bios does not display Options for virtualization technology

  I have a Pavilion HPE h9 - 1120t Phoenix with Intel Core I7 - 3770 k and Windows 7 Professional 64-bit operating system.

  I checked that my CPU indeed does support virtualization technology, and it does according to Intel. However, when I try to run a 64-bit VM in VM Ware player, I get this message: "the host is capable of VT, but VT is disabled.

  When I checked the BIOS to enable VT, I have been unable to find a setting for VT option can I update the BIOS to use VT?

  Hello:

  Have you checked in the Security menu Security / Unit of material?

  This is where the adjustment would be if she has one, and it is disabled by default.

  Paul

• Pavilion p6803w: USB boot option is not available in the configuration of the BIOS - can it be added?

  ???

  VetNet2016

  Sorry - NO - if the BIOS or UEFI menus do not provide the ability to select a USB key to start, there is no way to add this option.  It must be hard-coded in the firmware first.

• Pavilion x 2 10-n155sa: bios update does not install

  HP Support Assistant on a new Pavilion x 2 detachable (10-n155sa) said that the needs of the (Doritos 2.0) bios updated. He is currently F04 and offered new is F06.

  I accept the option of automatic update and it downloads etc and to sit down again 'installation' for too long. The PC is not suspended and the update can be cancelled OK, to keep the laptop on F04. It seems not really 'out' at all and immediately cancels the installation (I expected to take a long time to regularize).

  The laptop is running. I tried several times now and just on the installation screen.

  Someone at - it ideas? Is there a problem with this update? Any alternative to the automated mechanism?

  Thank you

  KB10

  Hello KB10,.

  You try to update the bios through the HP Support assistant or you download the file directly on the site of HP?

  IF not, I'll try later.

  Here's the direct link... SP73945.exe

  But in all reality, If it's not broken don't fix it. IF you don't have problems with the bios, then do not update!

  BIOS update are a different animal than updating a driver. If something goes wrong, you have enabled your system in a brick.

  And the HP Support assistant says you need to update the bios is not because its necessary. Don't do that if its absolutely need.

  But good luck anyway.

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• my laptop HP Pavilion product g7 #A7A43UA #ABA cooling fan is not worki

  My cooling fan does not work properly and I have already installed the new version of the BIOS HP Pavilion product g7 #A7A43UA #ABA can I use a fan to minimise damage?

  hope someone can answer my question thank you

  [s/n removed for privacy]

  How old is your machine? It is under warranty?  Have you tried to use a can of compressed air in the opposite direction of the normal airflow with the machine?  What do you mean by not working not properly?  You have an error message? The temperature of your laptop is too high?

• Pavilion 7000: Computer freeze once the fan CPU runs at max speed

  Product name: Pavilion 7000

  Product model: 7 p - 1090d

  Product no.: QP177AA #UUF

  Operating system: Windows 7 Home Premium 64 - bit version.

  Computer blocks once the fan CPU runs at max speed. Initially, the computer would occationally freeze after waking up from sleep mode (CPU fan would be occaionally operate at full speed & freeze the system).  Now cannot load even in windows. It freezes at the configuration of the BIOS once the fan turns at speed computer crashes if the CPU fan run at maximum speed wherever you are!

  1. I did the cleanning & lubrication & even take the battery to reset the Bios but no success too.

  (Before I can reset the Bios it will run normally.)

  2. remove all USB devices except the mouse & keyboard

  3. detach & attach Ram memory & graphic card

  I saw a ROM_Recovery shunt on the motherboard label. Must I do? or can someone help, please?

  I sent to the center of HP service after a week, the service staff telling me that he was unable to go bad because my motherboard is the American version, which I have no idea what it means (my PC was purchased locally) but to bring him back.

  I solved my problem of tried to detach the Rams (2 actuators) & install only 1 on an another RAM slot first. This works. Then installed the second RAM on an another slot also without no problems so far.

  I have an old HP Office also having the location of the faulty RAM & also had replaced graphics card but it raise a peep sound error which easier to identify.

  I agree with you more HP, hardware problem is due to RAM or video card. Thanks anyway

• Pavilion dv5-2035dx: error code BIOS corruption of HP Pavilion dv5 [DEAD VIDEO CARD]

  Product: Pavilion dv5-2035dx

  OS: Dual boot Linux Mint 16 and Windows 7 64-bit (no HP recovery partition) edition

  HP recovery discs: I have them, but cannot use them because the DVD laser does not (CD only)

  Symptoms:

  • While in the normal conditions of use, screen has suddenly had vertical lines black and gray
  • After reboot, the computer lights up and the fan works, but the screen is black
  • CTRL key flashes white light: 2 flashes, pause and repeat (BIOS corruption)

  Hello, I'm recovering from the corruption of BIOS, hoping that it is not a failed mobo.

  I downloaded the latest BIOS update for my system, but I can't this file to install on an external USB key using HP instructions to restore the BIOS.

  To 1.11 step, I don't get the "HP system BIOS Update Utility" screen. Instead, I get this:

  

  My questions:

  1. is there an easy way to get this .exe on a USB? (I tried 3 computers and 3 cards USB, WTH then?)

  2. If not, can I just unzip and create a bootable USB in another program by copy/pasting the BIOS file?

  3. is there anything else I should try before flashing the BIOS?

  Thanks in advance for your help. ^^

  UPDATE: the "BIOS error" was in fact the video card that failed due to repeated overheating. The repair shop, replace the video card and repaired the overheating problem (I don't ask how), and my computer is like new.

  For those who have a similar with their computer, my error "BIOS" problem (as it is coded by flashing lights of my computer) turns out to be a video card has failed.

  The repair shop, said that what happens when computers overheat frequently, which mine did. Thus, they have changed the video card and solved the overheating problem, and my computer is in working condition.

• HP Pavilion Dv6 A5F77AV: HP Pavilion Dv6 A5F77AV no option of DCIS

  I have a laptop HP Pavilion Dv6 A5F77AV. I've recently upgraded to a samsung evo and consider spending the AHCI system, but it doesn't seem to be an option in the BIOS.

  Device Manager indicates the storage controller driver is Intel chipset SATA RAID controller.

  The laptop is running on a processor intel i5, windows 7, Nvidia Geforce gt 650 m.

  How can I get the laptop to run in AHCI?

  Hello:

  In short, you can't.

  Please see this post that explains why you should not be concerned...

  http://h30434.www3.HP.com/T5/notebook-hardware/how-to-enable-AHCI-for-HP-envy-TouchSmart-M6-k015dx/m-p/5099796#M185078

• EliteBook 85602: Howto activate Intel HD Graphics on Elitebook 8560w workstation

  Hello

  I got a 8560w Elitebook which has an Intel Core i7 processor that supports Intel Wireless Display technology. Now, I want to use Intel WiDi for stream to my smart TV via miracast.

  But I can't do it, because only NVidia graphic card is usable. The Intel HD 3000 seems to be disabled. So my question is, is it possible to activate to use it? There is no option in the BIOS.

  Thank you very much

  Kind regards.

  Conclusion: It is not possible.

• Replacing the hard drive on my Pavilion dv6 - 3150ee but the bios is not recognize it.

  Hello

  I have a HP Pavilion dv6-3150ee. my original hard drive was broken. I bought a western digital 500 GB 5400 Sata 2.

  I installed the hard drive and made the recovery. Everything went well past and ok. When completed recovery operation, the system has restarted to continue the installation of hard drives but I got this message: no boot device insert boot disk and press any key.

  so I went to the bios and tested the memory and the hard drive and all was ok. I tried to get into my bios, advanced options, but it isn't everything. My bios version is F.12.

  I don't know what the problem is, and I will be thanksful for any help.

  N.B: I have my recovery discs and my windows repair disc.

  Thank you.

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• Satellite NB10 - activate the BIOS supervisor mode?

  Hello.

  Just unboxed a NB10 - has and our standard policy to put a supervisor on the bios password.
  Now when I enter the bios setup during startup, it is by default in supervisor (e) mode no and I can't find any way to ask me the password to allow me to make changes.
  Does anyone know what I forget? All the options are greyed out and I can't do it asks me a password.

  See you soon

  Oliver

  > Now when I enter the setup of the bios when booting, it is by default in supervisor (e) mode no and I can't find any way to ask me the password to allow me to make changes.

  Usually if the supervisor password has been set, you can access the BIOS by pressing F2.
  Now you need to insert the supervisor password, or you can proceed to restrict access to the BIOS options by pressing the F11 key.

  If you have inserted the right supervisor password, you could delete it again in the BIOS Security tab.
  Usually, you will have to insert the right supervisor password and have to press ENTER twice just to remove it. Then save the changes

  Here is a brief description is what the supervisor password.
  http://APS2.toshiba-tro.de/KB0/FAQ9202JF0000R01.htm