HP Pavilion problem

My HP pavillion GET stuck at the boot screen and will not continue and startup repair is empty when I try to repair and system restore is also empty. All this was caused by the automatic update that I didn't update my laptop, but it stays up-to-date automatically.

and the system restore is also empty.

How do you know that the restoration of the system is empty, as you say that nothing works?

Do a Safe Mode system restore to before the problem started.

http://bertk.MVPs.org/html/restoresysv.html

How to access Safe Mode

http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

Here is the guide to repair Options using a Vista DVD from Microsoft.

If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

Unfortunately, you have to buy it.

Here is a link to it:

http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

See you soon.

Tags: Windows

Similar Questions

  • 500-300na Pavilion: problem with Pavilion 500-300na (mother of Memphis-S) - Dead / no beeps sound and video

    Hello - I hope someone can help me please

    I have desktop PC HP Pavilion 500-300na.
    The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC does not work now.

    When you press the power button, the LED lights up, CPU fan, electric fan and the two spin system fan. There is no video. There is no beep error codes. What is it - actually dead.
    If I hold the button for about 5 to 10 seconds, the fans run down, but the rest spinning CPU fan.

    What I've done so far:

    Tried another monitor.
    Tried a different power supply.
    Powered by the motherboard on its own with any other disconnected.
    Taken the Cmos battery on the motherboard for 1 min and replaced it.
    Clean the dust from the fans (they were not so bad as to be honest).

    The machine worked with in PCI16 slot video card - I removed this for the test. As I can't get into the Bios, I can't put in the work of the "mother video card." Not sure if it is a problem.
    The unit has a strip of 8 GB of ram DDR3 - I tried this in another location without any changes.
    I have not tested the ram. I have not tested the CPU or deleted one of the fans / heat sinks.

    Thanks for any help you can provide
    Chris

    Okay, I think THAT I managed to fix it and understand what the problem was.

    I think the problem was double - first of all, before the problem started, Technical Assistance from HP have a BIOS update and download. I think that this update changed the Startup Configuration in the BIOS to "ENABLED" Secure.

    Not really a problem. . BUT...

    The video card I was running was a riser and secure boot DISABLED neeeded and legacy support ENABLED.

    I have reset the BIOS using the jumper (bios password) information – I also did a 'blind' changing information from the bios to switch to the use of the video of the motherboard (bash F10 for 10 seconds at the start, then three arrows down, then two returns... This pass BIOS to "Apply default settings and exit"). I don't know who really helped, but the machine comes up in life.

    I put the information here, in which case another experience a similar problem.

    Chris

  • Recovery HP Pavilion problem

    Last may I made a backup of my HP Pavilion dv7t-3300 windows 7 notebook. It created a disk labeled "HP Laptop Repair Disk Windows 7 64 Bit". I don't remember but assume I was told to label this disk as such. It also created 4 disks I labeled "HP Lapatop Recovery Disk 1,2,3,4". The 1st disk has folders labeled “Boot, hp,Preload, Recovery and System.sav” plus some other files. Disks 2 and 3 have a folder labeled “preload” and a few other files. The last disk, disk 4 has 2 folders labeled “Preload and System.sav” plus a few other files. I did a system restore using the HP Laptop Repair Disk" This created a system which looks like what is probably the system installed when I bought the computer. I am trying to find a way to now use the 4 Recovery Disks I made to complete my restore. I cannot find any way to get my computer to use these disks. Does anybody know how to use these disks so I can complete the restore? They do not boot and they are not recognized during the restore process where I am ask to put in the last disk.
    

    Creating recovery disk should have done 1 - X recovery disks (but many it necessary) rather than create those and a system repair disc.  Personally, I have not found HP Recovery Manager to make the system repair disc such that it is usually a builtin with Windows 7 feature.  Page 2 of this guide details how the process should have taken place.  She mentions that the labelling drives 1 x and no mention of a system repair disc.

    The system repair disc is usually used to access advanced service of Windows 7 since a retail disk options is not provided.  What happens if you run recovery disc 1 of the actual transfer defined instead of the system repair disc?  Recovery should really be started from the disk labeled disk 1 as it initiates the recovery.

    Don't have a HP Recovery Manager support when the system repair disc has been started? Other discs responded to after having inserted the floppy "system"?  If so, then I think that the 'system' disk is actually disc 1 of the recovery set.

    By any chance, did you get the next screen at any point by using the system repair disk?

  • HP Pavilion problems, failure ID is UAN413 - K 53066-XD0021-60QG03

    Hello

    I've had my laptop replaced less than a year ago, after problems with the fan. HP sent me my laptop comes with the issues addressed, which also "restart" the expiration of the warranty?

    On my problem, after more than a month to freeze completely several times minutes 10/05/15 after starting, my laptop now cannot start all over. I ran a check for startup, and it gave me the error code shown above.

    More information:

    Failure ID = UAN413 - K 53066-XD0021-60QG03

    Product ID = VY329EA #ABH

    Hard drive 1

    That's what it displays after the control.

    How can I fix it?

    Hi, me serious:

    A new hard drive will be much less of a new laptop so you are happy with your PC laptop dv6-2120ed.

    If you live in the USA, here is the link to a player that I would receive if it were me in your situation.

    http://www.Newegg.com/product/product.aspx?item=N82E16822136280

    If you don't want to pay for recovery disks, you can do your own installation of W7 disk by following the instructions below.

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    If you prefer to order recovery disks, then read the info on the link below to see if they are available.

    http://support.HP.com/us-en/document/bph07143

    You must transfer the connector, the screw and the cart from the old hard drive to the new.

    Here is the link to the service manual for your laptop. I think you can do the work yourself. See Chapter 4 for removal and replacement procedures.

    http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c01859609/c01859609.PDF

    Paul

  • Restore HP Pavilion problems

    Hi, I got the HP restore disks. After I insert the first diskette and it ends to load files, it displays an image to change the disks, I insert the disk and then additional or disc 1 or 3 and nothing happens.

    If I try to make a new booking and boot from that disk, it does not start. What is missing?

    Thank you!

    aleven2 wrote: Hi, I got the HP restore disks. After I insert the first diskette and it ends to load files, it displays an image to change the disks, I insert the disk and then additional or disc 1 or 3 and nothing happens. If I try to restart and boot from that disk, it does not start. What is missing? Thank you!

    Hello aleven2, you have to insert the disc 1 into the optical drive of th and start the system. The data will be copied to the hard drive and then you will be asked for the disc 2 of the game. Insert disk 2 and the process must continue and then ask for disk 3, and continue the process.

    Use the disc disc 4 (Supplemental) after the other three discs have completed the installation process.

  • Its echo in HP Pavilion dv8000 problem.

    Original title: echo Pavilion problem

    I am running windows 7 on a HP Pavilion dv8000.  Everything I play horrible sounds - echoes and as a concert hall.  I use a device audio conexant, I think.

    Start > Control Panel > sounds > click on the recording tab > click your default device (prolly a Mic) > then click on properties > and make sure that 'Listen to this device' is unchecked.

    See you soon,.
    Jerry

  • Can a Windows 7 upgrade disk rewrite a corrupted Windows XP registry

    Hi all

    My father-in-law has a blue screen on his PC HP Pavilion problem. It showed the following error description:

    Failure of a registry file

    Unable to load the hive file \SystemRoute\system32\config\SOFTWARE or its log or alternate

    It is damaged, absent, or not writable

    This computer must be upgraded to Windows 7 Ultimate, so my questions are:

    1. can I remove his c: drive, connect it to one of the bays expansion on my PC and copy & paste the files he needs to keep?

    2. If we run that a Windows 7 Ultimate Upgrade disc will be he able to run and will replace the registry with the new data required for Windows 7?

    This isn't a very old HP computer we're talking about, it works 4 GB of RAM, a 1 TB hard drive and a dual-core processor. There must be a way to get this operational return. The version of Windows XP, there is an OEM with no original discs to re - install Windows XP from.

    Thank you very much for any help offered.

    Brett Sanftleben

    I'm glad it works for you.

  • Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

    I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

    Thank you for your help

    Merah

    Hi @Merah

    Welcome to the HP Forums.

    I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.

    If I understand correctly you are facing problem control treble/bass in your laptop.

    I would like to know the number of full model of your laptop so that I can better help you with this problem.

    Thank you.

  • Slow performance HP Pavilion laptop problems

    Very recently, I bought a laptop HP Pavilion. It has Windows 8 and arrived in the mail, no more than a week ago. The first thing I did after that the mandatory installation process was to restore the files from my old laptop (which broke) via ClickFree (currently I have 625 677 GB free) and once that was completed, I installed several programs (office, Vipre, Photoshop, etc.). Apart from that, I did very little about the real hard disk of the computer, since I save everything externally on my ClickFree.

    My problems started occurring rather suddenly, Wednesday morning. In Firefox, I opened a tab for go on Facebook, and scroll the RSS seemed pretty gloomy. I closed the tab, but the slow pace continued in the other tabs, I had opened and then spread to the programs not involving is not the Internet. These problems have worsened gradually.

    On the Internet, the performance is particularly slow. I gave up video players like Netflix, because they freeze the browser to the point of crashing. Page loading is very delayed, even typing this message experiences freeze, despite the fact that I have nothing else running in the browser. There is warning of frequent messages in scripts and plugins does not (although, ironically, these messages are often unresponsive until I finish the script or the offending plugin). It is difficult to do anything on the Internet, such as the loading of pages and tabs of switching may take several minutes. Just clicking can cause the browser to freeze for minutes at a time.

    Off the Internet, programs load extremely slowly, often freezing. Opening files sometimes, with an increase in frequency, translates into a green loading bar at the top of the screen. Sometimes this bar gets stuck and cannot finish, and I can't access the contents of the file; This happened when I tried to open the Panel, to get more specific information about the computer to include in this message. Sometimes programs, such as video players, open without actually playing the video file, or they open at all. Often these programs freeze and sometimes hang; the desktop and the Explorer bar at the bottom of the screen (with the start menu, etc.) are not likely to freeze or disappear, for varying degrees of time. When I came to the computer, CPU utilization averaged about 4-6%, but now he's averaging 40 to 60%.

    Start the computer became too long and hard. The last time that I restarted, I entered my password only to get a completely black screen for at least half an hour; My office and the icons have appeared when I pressed Ctrl-alt-delete. After that, I stopped to turn off the computer (it was not a long time ago). This morning, I opened the laptop to connect, but received only a "Please wait" while the computer has tried to load the login page. It took 10-15 minutes, and then I was finally able to enter my password.

    These issues are getting worse, and I'm sure I'm forgetting several, but I think that what I've included enough to illustrate my problem. This is a new laptop, but it works almost as bad as my old laptop, which became unusable recently and had to be replaced with this one. I can't imagine what is the cause, but I really wish she was fixed. I installed a program called Fix - It Utilities (the installation disk supplied with the notebook) to try to improve the performance of the laptop, but to no avail. Any help would be greatly appreciated.

    Hello ValentineKills. I understand that the computer is slow. I will do my best to help you!

    This can be caused by a hardware failure or a software/driver/virus conflict. However, we won't know until the diagnosis is made.

    I'll provide a few official documents that provide information on how to speed up the computer. I want that you follow all the steps in all documents. In this way, if the problem exists, it will restrict the root cause. Here are the documents that I want you to try:

    http://support.Microsoft.com/kb/2746761

    http://support.HP.com/us-en/document/c03460887

    Since you're under Windows 8, I have a further suggestion: complete all updates to Windows, and then upgrade the computer to Windows 8.1. While the operating system is upgraded, try to use the computer and see if the speed is any different.

    Please reply when you have finished troubleshooting. I'm only here to help!

    Mario

  • Problem of sound with Skype only - HP Pavilion laptop Windows 7 x 64

    I have problems with the sound with Skype only - all other software that requires a sound work fine.  I don't hear my correspondent.  My Skype settings seem to agree and I get no error message.

    I run 7 x 64 window.  I have a laptop HP Pavilion G7.

    Any help?

    Hello

    Sorry, you have problems. For Windows 7, try this:

    Sign in to Skype. Click Tools at the top of the window, and then select Options in the menu drop-down. Click Audio settings in the left pane. Under the speakers, you can:

    • Use the Volume slider to adjust the volume.
    • Click on the arrow down in the drop-down menu to select the appropriate stakeholders.
    • Test the speakers by clicking on the green arrow next to the drop-down list of speakers.
    • Click on the link to make a free test call to make a test call.

    It may be a good idea to plug a headset as a test to see if it works. You don't need a headset with a microphone; Just use any headset allows you to listen to your music on your iPod. The nice thing about using a stereo headset is that you can always talk through the microphone on your computer, but only you will hear responses from your correspondents, and is as much your comments.

    Skype has a document of support practice that may help you: I can't hear my friend... (Windows desktop) .

    And now, the delicate question: it is possible that your friend accidentally cut his microphone? Or what is happening with all of your calls?

  • HP Pavilion 15 L0E38EA #ABU: video problem returned to windows 7 now graphics will not work

    Hi I downloaded the graphics driver on the hp support web site and still no joy the graphics card is in charge of driver default microsoft any time I install the catelist it will still save isn't a pure windows 7 install 64-bit service pack 1 my graphics are so chunky even when I'm going to hp support site doesn't let me download the driver I have download further help please

    Hey @soul864,

    I'll do my absolute best to help you with a resolution. Below, you will find that I have provided some troubleshooting steps to help with the graphics driver does not properly.

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to uninstall the current display driver? If this isn't the case, please try to:

    • Press (Windows key + X)
    • Click on Device Manager.
    • Expand display adapter.
    • Right-click on the video driver
    • Select Uninstall.
    • Once this done, reboot the laptop twice and check if the problem persists.

    You receive error messages?

    Did you get your Windows updates?

    Did you run the HP Support Assistant for the software and the drivers updated?

    You happen to have any antivirus software running, firewall, etc.?

    Problems in Mode safe?

    Have you tried to update the drivers in clean bootmode?

    Can you please provide me with a screenshot:

    • The section of the graphics card in Device Manager
    • The tab in the properties of the driver
    • The State of the device under the general tab

    I took a quick glance to your HP Pavilion Notebook - 15-p264na Software and Driver Downloads page and I see that there are 3 different versions of AMD driver at your disposal. That is you get to try?

    AMD graphics in high definition (HD) #1 driver

    Out the: 3 Sep 2014

    Updated: 13 August 2015

    Version 13.352.1004.0

    File name: sp68613.exe

    AMD graphics in high definition (HD) #2 driver

    Out the: October 17, 2014

    Updated: 13 August 2015

    Version 13.352.1004.1010 B

    File name: sp69351.exe

    AMD graphics in high definition (HD) #3 driver

    Out the: October 15, 2014

    Updated: 13 August 2015

    Version 13.352.1004.1010

    File name: sp69299.exe

    Have you tried to do a system restore to the time where everything worked properly?

    If this answer was helpful, please let me know by clicking on the button accept as a Solution . This will help others who have the same problem a solution also. If you want to show your appreciation and say thank you, please click on the Thumbs Up.

    If you need assistance, I would be more than happy to continue to help you!

    Welcome to the HP support community!
    Thanks for joining in!

  • Pavilion 500 215 el: audio problem Windows 10 anniversary update

    I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
    I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
    Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
    I ask you to help also became very boring because without my custom settings is really horrible!
    Thank you.
    Sorry for the English, but this isn't my mother tongue, I used google translator.

    Hi there @Alexcpp,

    Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

    Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

    You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

    Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

    I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

    I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

    I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

    Desktop HP Pavilion HPE h8 - 1380t CTO

    Model #: B4J28AV
    Serial number: 2MD2290502

    Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

    Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

    RAM: 10 GB of DDR3 memory

    GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

    @Faver, welcome to the forum.

    Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

    MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

    The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Pavilion dv4: problem in installing drivers

    Hi everyone, I am facing a problem by installing the following drivers. Please help me. Thanks in advance.

    Notebook: pavilion dv4
    OS: Windows 7 Ultimate

    1 standard VGA Graphics adapt - version: 6.1.7600.16385
    Hardware ID: PCI\VEN_1002 & DEV_6741 & SUBSYS_1646103C & REV_00
    PCI\VEN_1002 & DEV_6741 & SUBSYS_1646103C
    PCI\VEN_1002 & DEV_6741 & CC_030000
    PCI\VEN_1002 & DEV_6741 & CC_0300

    2. Ethernet controller
    PCI\VEN_10EC & DEV_8168 & SUBSYS_1646103C & REV_06
    PCI\VEN_10EC & DEV_8168 & SUBSYS_1646103C
    PCI\VEN_10EC & DEV_8168 & CC_020000
    PCI\VEN_10EC & DEV_8168 & CC_0200

    3 PCI Device-
    PCI\VEN_10EC & DEV_5209 & SUBSYS_1646103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_1646103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    4 unknown Device
    ACPI\HPQ0004
    * HPQ0004

    Hello:

    What is the complete model number or the product number of your laptop?

    Many products are on the label as well as the serial number.

    Other than graphics, here are the other drivers you need...

    Ethernet: 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

    PCI device:

    1 driver on the list...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

    0004:

    This will install HP 3D DriveGuard, which offers protection for internal laptop disk drive if the computer accidentally falls or suddenly hits another object. This package is available on mobile phones supported with supported operating systems.

    File name: sp53462.exe

  • HP Pavilion & "Windows 7 Upgrade Advisor came across a problem.

    Windows 7 would work on my laptop (HP Pavilion dv6132eu)?

    So I used "Windows 7 Upgrade Advisor" of the Microsofts. Which caused the error "Windows 7 Upgrade Advisor stumbled into a problem that your scanning devices. Upgrade Advisor needs to be able to scan your devices to determine whether your computer is capable of running Windows 7 ".

    The laptop is probably not good enough for Windows 7, why?

    I assumed, the Upgrade Advisor would tell me, what pieces of hardware is / are not specific to Windows 7.

    In a forum Technet, say, the Adviser is blocked by some HP hardware. Which?

    Best regards, Willem

    My problem has been resolved.

    Previously, the problem with "Windows 7 Upgrade Advisor BETA.

    I waited two months - now, I executed the Adviser again, resulting in "an important upgrade".

    And guess: update Advisor works like a rocket, finishing with a nice report with minor problems.

    So I think that the problem was a "Windows 7 Upgrade Advisor" - problem - not a HP computer laptop-problem.

Maybe you are looking for

  • scanning with scanjet G3010

    Hello I own G3010 and my used for a long time and its excellent gave me. But I'm trying to copy a DVD cover damaged with a SILVER background and I don't get a satisfactort finish I tried different settings, but do not get the case Your help please I

  • Pavillion 500-424: setting of the keyboard

    I just got this computer and the keyboard is equipped with all those different buttons above the number keys which run along the top, not those on the side. Where would my other keyboard keys F11 etc but these has pictures on them. None of them work.

  • BSOD on T60 after changing the graphic properties

    I just returned the display on my screen external 180 degrees and immediately got the BSOD. When I restart and try to return to the normal display, I get the BSOD until I can right click on the desktop and get the graphic properties setting. If I cha

  • Inspiron N5110 Bios is not supported for Windows 10

    I have a 3 years old Dell Inspiron N5110 i5 / 8GB ram/Nvidia with Windows home Premium. Very satisfied with its performance and quality. Today, I tried to book the copy of Windows 10 app Windows10 get. After struggling to make the visible icon in my

  • Windows 7: A cd to dvd device driver I'm missing?

    Excuse me.. I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written