HP Pavilion series g: my laptop does not load my profile...

Similar Questions

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Why Windows Vista does not load user profile?

  When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

  Hi James,

  1. When you created a new user account, have you configured it as an administrator?

  2. When you connect to the old user profile you are able to view your data?

  You can check out the following link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  The above link contains third party links.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please consult the following link:

  Troubleshoot "access denied" when opening files or folders

• Pavilion g6: on the laptop does not start...

  My computer hp laptop pavilion g6 have big problem of 2 weaks...
  First of all, they was directly cut working 25 to 30% battery level indicates without.
  Then in the last 5 days, they went to the startup problem
  And white screen... any time they start, but after 2 min keyboard or the cursor is a not working properly... some time say to prepare the satarting but does not start...
  I'll try all the formulas of yours but not working...
  Start the computer laptop led light still
  Led light also on but near the power light has no power continuous blink... That's the problem... Please help me as soon as possible...

  What is supported of these problems...

• Pavilion 15 laptop: HP Pavilion 15 computer PC2170 laptop does not boot to Windows - 2 years

  Hi, my Hp Pavilion is only 2 years and 2 months (not very old at all) but suddenly it does not start in Windows, it hangs at the HP logo screen, it starts with an HP logo screen then goes to another screen of the HP logo, and then freezes. I can't get into safe mode.  I got in the Hp diagnostic screens and I conducted tests on all and everything.

  I did a hard reset, still frozen.

  I removed the cover, he went out and placed him in, still nothing.

  Whenever I have to try and reset it, he said administrative privileges is necessary, but there is no administrative privileges on this computer.

  There is no restore point.

  I ran chkdsk via the command prompt and had no error.

  I tried running sfc: scannow but I had which was something in the meantime and could not do.

  The laptop is: laptop HP Pavilion 15 2170

  A6-5200 APU AMD processor

  Can someone computer whizz out there enlighten us on this you problem, please.

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion 15-n042se: my laptop does not light

  I have HP Pavilion 15-n042se I have connected my laptop to a TV using hdmi, a mouse and an external keyboard... I pushed the power button on the keyboard to hurt and when I tried to put it on again nothing happened all came down... so I searched the internet for this problem and I found that by pushing the power button for 30 seconds and remove the battery and the AC adapter before that could help , but it does not... I noticed that when the AC adapter is plugged in the laptop light refers to the AC adapter on the laptop is also off

  Dear customer,

  Welcome and thanks for posting your question on the Forum from HP Support.

  If there is no noise from the computer fans, the lights on the computer is on and the screen is black, follow these steps to solve the problem.

  1. check that the computer is powered by the AC adapter.
  2. use another adapter.
  3. remove the battery and boot on power supply only.
  4. remove the AC adapter and the battery start only.

  If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the device.

  I would ask you contact HP support for more information.

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• embority singer used with old portable new computer laptop does not load software

  I have a sewing machine singer ebrodiry I used with my old laptop with the new laptop dosent load software and it does not recognize the sewing machine which can make

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  If you use windows vista refer; Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  If you use windows7 refer the link and check.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I also suggest you to reach the center of singer and check.

  http://answers.Singerco.com/answers/7010/category/embroidery-and-sewing-machines/questions.htm?page=2

• Vista does not load my profile. Temporary, one was created in its place.

  I tried to correct the profile instead of creating a new one because the profile has too much time in there just throw, I tried to change the registry values as this guy did http://cherrybyte.blogspot.com/2007/07/fixing-user-profiles-in-vista.html but it has not worked for me. I know that there must be a way to force it to load, but as the still I have not found. System Restore did not work also.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP pavilion g6-227sa: my laptop does not detect my wifi!

  Recently, I changed my victory windows 8 for win 7. "I downloaded" network drivers "via the net and installed on my laptop, but to my surprise it detect other wifis, but it cannot detect my wifi. "I should say when I go on ' network and sharing Center"and then click "Manage wireless networks", I can't find anything.

  I went to "Device Manager" excerpt "Network adapters", I find that 'Ralink RT5390R 802.11bgn Wi - Fi customize' is installed and when I rigt click it and hit on "scan for hardware changes" I think "Enternet Controller", "PCI Device", "Controller PCI of Communication Simple", "Controller of Bus SM", "Controller of (USB) Universal Serial Bus", "Unknown device" are not correctly installed.

  Thank you before hand for your guide.

  @Nikoo

  OK, we're done with step 1.

  Then, you have to go back to Device Manager and open the network cards.

  Then right-click on your wireless device, and then click on uninstall.

  Reboot the laptop and let Windows install the driver.

  REO

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• Pavilion x 360: my computer does not load

  I can't charge my computer when I'm with her. I can still load it when it is in "sleep" well.

  @Santarky

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you.

  If I understand the charges one battery when the computer is in a mode "sleep" and here is what I suggest:

  Perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  Update the BIOS of your computer: (for details click here)

  Step 1: Find the version number of the current BIOS

  Step 2: Finding the processor type

  Step 3: Search and download BIOS updates

  Step 4: Installation of the update of the BIOS

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.

  Have a good day Ahead.

• I can not connect my computer laptop 'could not load user profile '.

  Can someone help me pls? My laptop cannot open a session. It gives me this message - "unable to load the user profile.

  I have windows vista and my laptop is Toshiba Satellite.

  It does give me any option on the screen. Can anyone help pls?

  Hello

  You can try to start in safe mode.
  This will automatically use the admin account.
  If it would work then you could create a new user account and could use this new login account.

  See also this MS knowledge base article:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215/en-us

  If this doesn't help then you will need to restore the system using the recovery disk ;(

  Good luck

• Handyman does not load my profile

  When I connect to play tinker on my computer, a window pops up that says "Download profile.this may take a few minutes", but he made no progress. Help!

  Hi Arecedude1,

  1. do you try to sign in with the Windows Live account?

  2. you receive with the message error codes?

  3. were you able to play the game on the system before with no problems?

  If you are using a Windows Live ID, and then try the steps listed in the following article:

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  Hope this information is useful.

• Equium P200D - does not load

  I have an Equium P200D who did not pay correctly, I bought a new charger and it worked fine for a while. However I noticed that the laptop has not been held liable. Now the laptop does not load, and even with ac power plugged he won't shoot upward.

  I'm assuming that the battery exceeds the usefulness, but it should not start when plugged into the mains, with battery in or out? So can I assume that support on the laptop is useless?

  any help would be appreciated

  Hi blueknowz,

  > and even with ac power plugged he won't shoot upward.
  This means that the laptop doesn't start over even the AC/DC adapter is connected, right?

  Well, the computer should start even when the AC/DC adapter is connected but the battery is defective. If the battery is not important, you can use Notepad with AC/DC adapter only.

  If the computer laptop doesn t start it looks like a malfunction of the motherboard. It is maybe something wrong with the s load control.
  An accurate diagnosis can be made from an authorized service provider. Do guys say sabout this behavior?

• Home page does not load my Satellite

  My laptop does not load home screen, it just says, configuration of windows 100% full features turn off your computer, it has been like this over an hour, the new laptop there is 3 wewks.

  Hello

  What model of laptop do you have and which version of Windows is installed on your machine?