HP pavilion stuck on the boot screen g4...

Similar Questions

• Stuck on the boot screen blackBerry smartphones...

  I have a blackberry bold 9780 and I got it 2 years ago, when it first came out...

  I never had a problem with it since he gave up many times and traveled all over the world with me!

  Never had a problem until today... it froze while I was browsing the internet this morning I did what I usually do, which is hold down the button "end call/off" red until it erases everything.

  When I did it today, it was still very slow and then the white screen will appear that says: "error App... Reset'

  So's as I said and restarted the phone... It didn't as usual and responsible for the loading screen start fully but no bar to not actually turn on! so I plugged it in charge hoping that would come to start up, but nothing happened! ive tried since then, then it restarts several times by taking the battery, but still go further than the bar full load...

  My life is on my blackberry and I almost never again place... so pleaaaaaaase can someone help me!

  Thank you very much... Jess

  Thanks for your Post... !

  Please remove SIM card and media and then try to start your computer pocket, if success take full backup & perform a clean OS reload.

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB11320&sliceId=2&cmd=displayKC&d...

• Windows 8, stuck on the boot screen

  A few months ago, I bought a new computer with Windows 8 is installed.  He is now in a State where it lights up and freeze on the screen of the tile, I can't click on buttons or even open the search.  She used to freeze while I was using it and restarting would solve the problem, now, who will no longer work.

  What can I do to fix this?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I understand that Windows 8 computer hangs at the splash screen.

  Before you continue with the troubleshooting steps, please answer the following questions below.

  (1) what is the brand and model of the computer?

  (2) have you made changes on the computer recently?

  (3) what security software is installed on the computer?

  I suggest you follow the methods below and check if the problem persists.

  Method 1: Perform a restore of the system using the DVD in Windows 8.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: You may be prompted to insert disks or recovery media supplied with your PC. Check the information that came with your PC to see if the manufacturer of your PC provided these discs or media. In some cases, you may set their when you set up your PC.

  Method 2: Refer to the link below and follow the instructions.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3: Please refer to the article below and follow the instructions.

  Improve performance by optimizing your hard drive

  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also section below.

  Ways to improve the performance of your PC

  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• HPE 570 t does not start, stuck on the boot screen after update bios drom 7.11 to 7.15

  Hey guys,.
  I have a HP HP Elite desktop pc. 570 T.
  After upgrading the bios of 7.11 to 7.15 because of start-up time notable even if I use a ssd for the file system, I'm stuck at startup. I tried reseting bios using the jumper, but it isn't working and I removed everything except a 4 GB ddr3 and the problem still persists.
  Help, please

  Update:
  I removed the CMOS battery and re-installed and everything works well

• HP Pavilion stuck on the white screen

  He had since November/December, Windows 8, it kept freezing so I restarted. It showed 'Prepare auto repair', then went to a blank screen (help I need before the 4th) and it has been like this for a day

  Hello

  The info is good and which would indicate This is your laptop.

  The error code for the short drive Self Test would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  As your laptop should still be under warranty, contact HP and arrange for the replaced disk - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• Windows 7 Boot stuck in the loading screen

  Hello

  I have an Acer laptop, I don't know really how and when it started there is 3 of us using this computer, but now when I open my laptop it get stuck in the loading screen "starting Windows." It is not frozen, it's just stuck there. And in order to enter the actual Windows operating system, I have to first press a key.

  It could be things possible cause?

  Here are some solutions I've tried based on my research on the Internet:

  1 uninstall Antivirus.

  2 reset the BIOS.

  3 chkdsk all discs in safe mode

  4 scannow command, he had errors but did not say what that

  5 edition msconfig and do a clean boot with no start-up of the thread and MS services only.

  I hope someone can help.

  Thank you

  Hello

  What button do you press; F1 or F2?

  If so, check if the Date and time is correct.

  If she is not and again become incorrect after reset correctly, then turn off machine, then turn again, it's a battery CMOS failed in the motherboard, the origin of the problem.

  See you soon.

• HP pavilion g6 stuck on the black screen with cursor 8 windows

  Hello.

  I used windows 8 perfectly... but today when I rebooted my laptop I don't have the 'Press esc to access the configuration menu"and once loaded in the windows icon. It got stuck on the black screen...

  Any ideas or suggestions? How can we get? Icannot go to the start menu cannot load the... Task Manager what can I do? Also the battery also affects bones

  "It was a moment cartoonic, when gravity stops for coyote to make him realize that he was wrong from the beginning."

  Hi, I did a hard job looking for a solution, and after a while, I found a solution. The solution to the problem was a little easy, but at the same time a bit funny too, hehehe.

  The solution was, when I removed the battery, then did what you told me, I even! Even the black of the same screen cursor. Then I tried power the computer nothing do but simply by pressing the power button without the battery in it. The laptop ran using cable ca, and then I was able to use the windows. Its perfect work. Now I have piles in too and its still in good condition.

  Now what do me? Should I replace the battery, I get error 601 (main battery) too. So should I replace it with a new one? I hope that it will be more preferable.

• Envy 15: Stuck on the HP screen

  Good so recently I accidentally leave my laptop ran out of battery. I've loaded and started upward and it's gone through an update of windows then stuck on the loading screen HP during auto restart during this process. All I see is black HP logo and the white dots circling below until after a few seconds the HP logo becomes, but the indirect approach points continue.
  
  I did a hard reset but it changed nothing. I also ran each test system, it won't let me in the menu diagnosis and has passed everyone, including 2 extensive system testing.
  
  Whereas this problem is usually either a broken hard drive or fixed with a hard reset I am at a loss for what to try next. It's a HP Envy 15 with Windows 10 - 64 bit.

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to the type of media you created, then press on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the Windows system restore to return the laptop to a point in time before this problem occurred - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• Yoga 2 Pro stuck on the BIOS screen

  Yesterday using my pro, I let the battery run completely. When I went to use the computer today, the computer is stuck on the white screen of lenovo.

  Computer will not configuration options or boot bios enter unless the hard drive is removed. I can run the computer without the pcei HDD when you use a disk external hard usb. Not really sure where to go fron here. I tried to remove the hard disk, booting from a flash drive, then reinstall the pcei reader, but it does appear quite Similarly when searching for it through the command prompt. Thinking I have a bad drive hard, but I am at a loss at the moment

  Yes, I'm guessing that the drive might be bad.

  Try the Secure Boot turn off/on or affecting in the UEFI/Legacy BIOS as well. It might allow you to start an external drive.

  Make sure that the boot order is set to an external start too.

• The Cliq is stuck on the start screen.

  Hey guys, after a normal day of use with my Cliq from 07:00 I got around 17:00 and put it on the charger, as it was almost dead, I went to charge less than an hour with it and now it is stuck on the start screen of Motorola with the small black bar on the left. I charge my phone all night every night and do not use it much at all, but it lasts and I wasn't there to look at what had happened, so I don't know if there was any discrepancy prior software other than seeds from basic mentioned by others.

  Charles, you are still able to boot into Recovery Mode and learn the triangle with the exclamation point? If you can, press the keys ALT and L at the same time to access the Recovery Menu.

• Product key not recognized during a repair of xp pro sp2 on a genuine xp pro sp2 disk. stuck on the main screen of the product.

  After starting problems on my Toshiba satellite with xp pro sp2, I booted my xp pro sp2 disk and did a repair instead of a reinstall software.  He went through the motions, removed the sys files, copied them back and so on.  Then he asked my product key and I typed in it and it does not recognize.  It's a real bought copy of xp pro sp2.  Now, I'm stuck on the main screen of the product.  When I start the laptop on the xp disk it blue screens, the only option I have is to enter a product key in the configuration...  I have my receipt for my xp pro disk and product key for certification sticker.  Help, please!

  "XP MCE Pro? That is not normal! It would be one or the other (AFAIK). Here is an example:

  http://cdn2.ioffer.com/IMG/item/811/353/46/o_XyuQav94U1MQ0Ci.jpg

  If the hybrid you mention is the real thing, it's new to me! I know that some have described as a superset of Pro MCE, but I never used this version, so I can't tell you definitively that a COA sticker wouldn't this combo of terms...

  In addition, the term 'Enterprise Edition' implies something not legitimate. I do not think that Microsoft has never used the term marketing for Windows.

  If you had a legitimate retail version of Windows XP (any version) that is not used on another PC, you can perform a Clean Install (not a repair installation), using this key (not the key COST laptop). The only way you can use the key from your laptop COST would be if you used the correct installation CD - a generic OEM version of the corresponding XP (MCE?) version. In this way, you can perform a clean installation or a repair installation.

  Have you looked at the links I posted? What do you mean by "boot option? The instructions were to press the zero key while turning on the laptop. You are not supposed to enter the OS! The recovery partition is quite distinct.

  If your laptop does not a recovery partition, you should be able to get the correct recovery CD for this Toshiba - by Toshiba or you might need to find a reputable eBay merchant, etc.. Restoredisks.com, who has a good rating from Better Business Bureau, they probably sold too.

• Vista stuck on the home screen, impossible to connect

  The problem came from last night after that my computer had a blue screen and proceeded to do some sort of system dump or something like that. Subsequently, I have been unable to connect to one of the five accounts on the computer because it stuck to the home screen after clicking on the account. The little blue circle would continue forever. The computer works fine in safe mode, but I tried a clean boot with MSCONFIG and it still doesn't work. Any ideas? In addition, CTRL + ALT + DELETE DO NOT solve the problem.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do the restore of the system in Safe Mode, you cannot do it in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• (Redirected) Dell Inspiron stuck on the "Dell" screen after update failed...

  Hey everyone my Dell Inspiron 15 cannot download an update and then rebooted.

  Then he got stuck on the "Dell" screen and the Windows 8 boot custom. I can get into the Bios, but nothing seems to help, and the Diagnostic test says that it cannot find the hard drive.

  Any help?

  Peter Hamm

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.