Windows 7 Boot stuck in the loading screen

Similar Questions

• Windows xp hung up on the loading screen

  I have a gateway LT2016U and windows is suspended upward at the loading screen. the status bar continues to go, but the light of the hard drive on the computer is turned off. When I go to the safe made it stops at the line multi (0) disk (0) rdisk (0) partition (2) \windows\system32\drivers\amdagp.sys to safe mode startup. When I try and make a last known good config is located just at the windows loading screen.

  you could also try mode safe mode with command prompt and see if you get anywhere with the machine.

  If nothing, i.e. None of these boot menu options work, then you should borrow a cd from someone win xp so that you can start with it and start the recovery console.

  I do not have a netbook, but its likely your bios can support USB boot.  in this case, you need a usb cd drive in order to use the above method.

  If using the cd xp is not possible, then your only recourse is to go on the net House books site and see if there are tips that you can use.   but I guess the only option they will bring must provide the step on performing a factory restore, that will wipe the drive and reinstall the original software.

  the original software is the will is in a hidden partition which is inactive on the hard drive.  then using a certain key sequence, the hidden partition will be re-activated and start restoring.

  but send an email to their tech support and see what they say too.

• First Elements 14 stuck on the loading screen

  He worked for a month until today. I add a title to my book trailer when it crashed. I tried to open it up and it gets stuck on the loading screen. It makes it never happened: loading ExporterQuickTimehost.pm

  I'm working on a Windows 10 HP Envy laptop.

  Any help would be greatly appreciated.

  Deidre

  Hi pascalou,.

  Can you please tell us what is the amount of memory that the application supports, by checking in the task-> process manager. Also, remember the name of the title which had caused the crash?

  Have you tried to reboot the machine and then try?

  -Odette

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Skype is stuck on the loading screen!

  My Skype is stuck on the loading screen! I used to have this problem but I fixed it by reinstalling. I'm on version 7.25 (.0.106) and it does not stop. I have java to work on IE and updated manually.

  What firewall and Antivirus applications are installed on your computer?

• After Effects are stuck on the loading screen

  Everytime I open after effects CC (the 2014 version) it starts to load, but then gets stuck on the loading screen that says "initializing MediaCore. I used the free trial version and it works perfectly, and the creative cloud says that the app is updated. Why does not open After Effects?

  Hang | Initialization MediaCore | Splash screen | After Effects, Premiere Pro

• Windows 8 apps don't be loading not, stuck on the loading screen

  As the title says, I have installed Windows 8 and put to update some drivers and anti-virus. When I go to start and click on any application it will not load. It gets to the loading screen and doesn't change from there.

  Help is much appreciated, thank you.

  Hello

  1. it is just the modern UI apps that did not load.
  2. yes I tried to disable the drivers and antivirus (Kaspersky Internet Security 2013) however apps still has not loaded correctly.
  I tried restarting the PC and reinstall the anti-virus etc, however no difference.
  I actually ended up performing a new installation which sets out all the questions. My PC is now very fast and standard. It seems that the upgrade process has not worked for me. I hope that this thread can help someone else with the same issue.
  Also my Cyborg v7 keyboard does not work with Windows 8, I had to use my old keyboard Logitech G11 place.
  Except that everything seems to work very well and I'm finally take full advantage of the Windows 8 experience.
  Thanks a lot for your help.

• Windows Vista starts only with the loading screen

  Original title: Problem with Vista Business

  I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?

  Hello RussellNolan,

  It may be possible to solve this problem without having to reinstall the operating system.

  What exactly happens when you try to start normally?

  Let's start with the safe boot mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works, we can try to boot minimum troubleshooting:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps out.

  Best regards

  Matthew_Ha

• my phone is stuck on the load screen

  I was just on my phone and it glitches so I pressed the home page and lock button to restart and now it is stuck on the load with the apple logo screen, and I can't do anything else that turn it off but when I turn back goes back to the load up screen.

  Put your iPhone into recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• restart Windows homescreen befor (just past the loading screen)

  Help, please!

  As I said, windows restarts right after the loading screen, but this isn't the only problem after BIOS screen (first), my keyboard no longer works, so I can't choose to load bootable disc or choose Safe mode!
  now my pc restarts again and again! and I don't know what to do! Please help :(

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/308041#3

  It will be useful.

• Application of music stuck on the loading screen

  Hello

  I have an iPhone with iOS 9.2, and for some reason 6s why I opened the music app from Apple, it stays on the loading screen and does not open. Left for more than 15 minutes and nothing happens (and Yes, I am connected to WiFi and the internet works fine on my phone). Please notify.

  Best,

  Hussam

  Force to leave the app and/or reset the phone by pressing the home button and the power/sleep at the same time until the Apple logo appears. No data will be lost.

• Impossible to load Windows Vista, screen stuck at the loading screen (green cursor will move to the right)

  Last night I tried to Hibernate my laptop (Windows Vista 64-bit), but it took forever so I held the power button to stop it. When I started it today, however, it would not load windows. I tried loading in safe mode, but it stops at crcdisk.sys. I tried using the automatic repair tool to find issues. The first time, it took about 2 hours to fix, but once it asks me to click 'Finish' to restart, it restarts and arrives at the black screen with the Green loading thing goes from left to right. It remains to this screen for minutes, hours. I also tried to boot from the last known good configuration, and this does not work either. I tried to restore to a previous point, but there was no previous system restore point. Windows was working fine the night before.

  Thanks in advance for any help.

  Sean

  The symptoms you describe point to a faulty hard drive. Hard drives can appear to fail suddenly like this so the fact that he was 'before' is irrelevant. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• Question from windows vista - get stuck on the Welcome screen.

  I recently had my computer startup problems - it gets stuck on the home page, even if I restart it continues.  If I'm doing a ctrl + alt + delete, and then it displays the desktop.  I have no updates that must be accomplished.  you have an idea why this is stuck?  Thank you!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP pavilion 17 Laptop: stuck at the loading screen

  Hello!
  
  So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?
  
  Thanks in advance,
  
  Giovanni

  I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

• HP ENVY m6 n010dx: HP ENVY m6 n010dx stuck on the loading screen

  I have another problem with my computer hp laptop. I'll give some general information, before I started having this problem.

  I was on my laptop, watching my email. I went to open a new tab and typed in "youtube.com" and the page will not load. After trying to have the research charge several times, I realized that I was getting nowhere. Then, I slipped on the computer left (being a touch screen, it would have to open the menu where I can restart the laptop). This screen never popped up (laptop was frozen) so I simply got the power button until the laptop is turned off. I then turned on the laptop back, and he began to start as usual. He showed the black background, with the blue hp logo and was spinning, white, loading icon at the bottom in the Center. However, he never went any further than that. It is not really frozen because the white loading icon turns without stopping. At this point, I tried to find what to do. I tried a reset (I turned off my laptop, took out the battery, unplugged the charger, which is held the power button for at least 15 seconds, put the battery in the back, plugged the charger back in and turned back on the laptop). After that, I'm always met the same loading screen hp, white spinning loading and all. Sometimes, under the white thing of loading are the words "Prepare the automatic repair" However, nothing happens.

  My laptop is a hp ENVY m6 n010dx (touch screen)

  The serial number is: [personal information deleted]

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with the original questions that you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K