HP Pavilion will not start past blue hp invent screen

Similar Questions

• error code 213:19 what is?  Photoshop Elements will not start past this error message.

  What is the error code: 213:19... Photoshop Elements will not start past this error message

  Error 213:19 | Problem is the license for this product

• 6746c Pavilion: my Hp Pavilion will not start

  I have a Hp Pavilion desktop computer that is running Windows Me on this subject. I had the computer since 2000 I only use it for computer games now. I've never had a problem with this computer before, but recently it started having a problem. When it starts it only starts up only Hp Invent screen and does nothing else. I started using another keyboard and mouse for him.

  HP Pavilion 6746c

  After doing some tests, is the keyboard that was causing the end Ill have to check the goodwill of an older keyboard.

• System will not start completely, blue screens and then restart

  Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

  To boot from a DVD, positioned on the BootOrder:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer will not start!-boots to black screen

  OK so this is what is happening I think maybe breaking it... so I she closed and he was going to shut down, but before I did I wanted to install updates, I have so been lettng but my cat hit the power cord and it turned off I tried to restart it and that I start more... as it does all the normal show the loading bit like him bar all go and bam just a black screen... Ive put in the recovery disks, but they charge that just stop on the waiting screen please and were someone at - it something that can help me or know why it broke? original title: Vcomputer does not start!

  Have you changed the boot order to use disk recovery/s?

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the recovery discs are still not working, you will need to contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion will not start

  I have a Pavilion P6774Y desktop computer.  A few days ago, he would not wake up.  I turn it off and be restarted using the power switch and the blue HP screen appeared, followed by a black screen with a cursor blinking in the upper left corner who disappered after a few seconds.   After repeating this a couple of times, I swapped the monitors and HRT has not set.  Then I unplugged it, let it sit for a few minutes, plugeed it it and restarted and it started normally.    Since then, the same question has occurred several times.   Sometimes it reboots normally, other times, I get the black screen.  Sometimes it takes to unplug and reboot several times for it to start.  Does anyone have any suggestions where to look for a solution?

  TF1965, welcome to the forum.

  There are two possibilities: 1) a lack of power supply unit (PSU) or 2) a hard drive failed.

  Here's a guide to troubleshooting of the PSU.  You can test the hard drive by using the Test SMART in BIOS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion will not start the power upward

  I have a HP Pavilion (prod. # GG753AV #ABA) running under Windows 7.

  Power on, the switch lights up blue, fans are taking place but not boot upward and no display

  I tried unpluggin keyboard etc but no luck

  Thanks for any help

  Thanks for getting back to me!

  Make sure that the monitor is on the correct input/source. On the monitor, you should have a Menu button or a button input/Source. The Source of entry/must be set to VGA. If the monitor is set to a different port like DVI or HDMI type, it might be initially to go to sleep because it does not detect plugged into ports. Check and double check the input source.

  Also try reinstalling the RAM, which is just out the RAM and put it back in. If you have 2 sticks of RAM, you can also try to just put one in at a time in each slot to see if the screen lights up.

  I hope this helps. Let me know what you get results.

• HP Pavilion will not start, has horizontal lines on monitor - HP Pavilion Elite M9280a

  I tried to start my computer yesterday and I had a brief message 'Error in Vista' then - my computer would not respond.

  The monitor has just shown the colored horizonal lines.  Then, I rebooted the computer.

  Since then, I can't reboot my computer at all however, I can get into safe mode to connect but remain - lines horizinal who won't go away.  The icons are much larger in safe mode too.

  When I try to log in normally, the system will repair mode and finally displays the following message:

  ' Start can't fix computer automatically "I went to see the details of the problem and this will display:

  Signature of the problem

  The Startup Repair V2 problem event name

  Problem signature 01 Auto failover

  02 6.6.6000.16396.6.0.5001.18000

  6 03

  04 131074

  05 no cause root

  06 no cause root

  07 0

  2 08

  WRP 09 repair

  2 of 10

  6.06.000.0.00.256.1 OS version

  Locale 1033 ID

  I did start diagnostic tests and everything seems ok, but the computer doesn't not recogise my graphics video card.  The system, it shows the video card - VGA video controller - PCI Bus 2 - device 0, function 0.

  Can someone help me please!  Products listed below

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay?javax.portlet.begCache...

  Hello

  Technical page in your PC Watch: the Nvidia GeForce 8600 GT, or integrated graphics. You can check which graphic solution you have?

  You can see the desktop when it is in safe mode?

  Try the safe mode with networking enabled.

  A position that interests you, your Version of the OS (6.06.000.0.00.256.1) indicates you are running the original version of Vista. You must also upgrade Vista to Service Pack 2 (6.0.6002).

  If you can not download the drivers in safe mode with network, can you download the driver on another PC and save to disk?

  While in safe mode try to remove the possible corrupt driver using Control Panel, restart and see if Vista will load a generic graphics driver. Then, you should be able to download and install the appropriate driver.

  Jaco

• HP Pavilion will not start? help please.

  A few weeks ago, I had a pavilion dv6700 out of my brother, when I turn it on hp invent comes on the screen and shortly after it turns off then try to start over, he repeats this process again and again, sometimes after that it says "not found opperating system".

  Ive tried a system restore and also led a diagnosis whose results were, for the primary hard drive no self-test "no IDE device".

  and 'transmitted result' memory test any help would be great thanks in advance.

  http://h10032.www1.HP.com/CTG/manual/c01295877.PDF

  {+} Removeal and replacement procedures

  [+] component replacement procedures

  Click on HARD drive

• My iMac will not start past the gray screen

  At startup, the iMac rings and goes to the grey screen where he hangs up and does not progress.

  I tried with the command/R button from Mac, but the utility never appears.

  I tried to start with the SHIFT key down... same thing.

  Is there something I can do?

  Thank you very much!

  Paul,

  My iMac (early 2010) has just started doing the same thing.  Initially, I could start in recovery mode, but download time was 18 hours and time increased.  I stopped the download and downloaded the installation on a USB disk on my MacBookPro in the hopes that I could start the iMac to the USB instead soon and not tomorrow. Now, I can't get the computer to boot on the USB stick or the recovery partition.

  So he can start on the USB key you must hold down the option key when you hear the chimes boot.  Then maybe you can try and have some success.

  If you find something that works to post here, if you think about it!

  Good luck!

• HP Pavilion will not start. Password Startup requirements.

  I have a ho27c model 23 H P Pavilion all-in-one number.  After an altercation with a crook of phishing, I can't get starts the request a password at startup.  After several tries, I get nothing, but demand repeated password.  I never opened a session as an administrator and has never seen it before.  Can anyone help?

  Product number is: F3D92AA #ABA and the model is: 23 h 027 c

  Thank you...

  ... LWMc

  It is always helpful if you specify the operating system installed.

  You have two options.

  Download a stand-alone antivirus\malware\adware scanner of a real antivirus company.

  Search for your game of recovery disks and perform a factory image recovery.  You can also do this from the power on with a F11 key. You is probably the best option.

  Once you got make sure that your PC and install a highly rated internet protection suite. Freebie antivirus programs are no help when it comes to rogue virus and malware such as you seem to have picked up. I prefer ESET Smart Suite and Norton Internet protection.

• Laptop will not start. Blue screen error Stop: 0 x 00000024 (0 x 84633988, 0 x 0000102, 0 x 00190445, 0 x 00000000)

  My phone displays a message a serious problem had been detected and Windows has shut down to prevent damage to the computer.  He tried to do a restore system but which lasted nearly 2 hours and nothing happened.  I shut down the computer and tried to restart but now I have the blue screen with the error listed above.  I tried to reboot in safe mode, but I get the same message on the blue screen.  For any help or suggestion would be greatly appreciated.  Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  --
  ..
  --
  "no idea for now" wrote in message
  News: 6d9f4860-328 c-4f3c-ba8e-c3f27ec85f01...
  > I am not computer saavy, so I don't know what you're talking about.

• E5 - 522 will not start past logo

  Have tried f2, f8, f12. Cannot get past the logo. Can I 10.

  Easy way is to return to Costco, they are very good by accepting returns within the warranty period.

• S3000 will not start. Powers, but no screen output...

  I can hear it start up, and if the cooling fan left comes power. But no output at all is displayed onboard screen or an external display.

  By turning the disk hard flashes for a second or two, but that's all...

  Hi Neil

  If there is no success with display internal or even external monitor, it must be a hardware malfunction.

  You hear a beep at the beginning upward?

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon