HP photosmart 7510: print

Similar Questions

• Pavilion a6312p: Photosmart 7510 prints blank page

  I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

  I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

  Hi bankercop,

  I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

  Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

  Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

  I hope this helps you. See you soon!

• New PhotoSmart 7510 print does not correctly

  I have a new 7510, replacing one PhotoSmart more old.  I have 2 problems with printing.  First - when you print an email the top and bottom of the headings are cut, print off the page.  Is there a setting I can adjust for this problem?

  Second - when I print photos I get a small thin strip of white at the top of each photo.  I feel no margins selected in Picasa as well as in the printer settings.  I am an avid scrapbooking need full size 4 by 6 photos to print.

  I've never had these any of these issues with my old printer.  I hope someone has a solution for me.  Thank you.

  Hi shiftee,.

  Follow the troubleshooting steps in the document below and let me know what you find?

  Troubleshooting print quality problems

• Photosmart 7510: Photosmart 7510 print offset of text to the right

  I use MS Word 2010 and when I print the text it seems 7 mm offset to the right. e.g. fixed left margin at13 mm starts printing at 20 mm, and right margin at19 set stop mm 12 mm printing. The same offset is displayed when you use other applications for example Publisher, Zara, Photoshop etc.

  Top, bottom, header and footer print exactly in the correct position.

  Of course, I can adjust margins to compensate for this error, but it is a bit a nuisanse and offends my sense of! I have had this printer for 3 years and the problem appeared right from the first day. I have other HP printers, but they do not display this problem. My printer is connected directly to the computer via USB.

  Hello @GreatSimms,

  Thanks for getting back to me on this subject. I'm sorry to hear that the steps I have provided could not solve the printing problem. If the impression is always shifted to the right that which usually indicate an alignment as the text is not aligned correctly on the page.

  Could I please have you run an alignment for me just see if that makes a difference.

  1. On the printer control panel, press the Setup icon (), and then tap Tools.
  2. Tap the align printer.
  3. After the compliance, prints an alignment page.
  4. The successful alignment is displayed. Press OK to exit the screen.
  5. Examine the printed alignment page. It should show all models of color - especially the black and blue patterns. The ink must not be streaked or indistinct.

  

  If the printed document appears to be centered, could I please have print you another document on your computer to verify that the problem has been resolved.

  Please let me know the result of the execution of the alignment. If the problem persists, there is an additional discount I have executed him. Good luck!

• HP Photosmart 7510 prints not apps

  I can't get my printer to print from applications or by e-mail, but it prints from the printer Utilities window so I know it's the connection through wifi works. I have a brand new MacBook Pro. All of the suggestions. New Mac user.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Photosmart 7510: prints is magenta ink

  I was away for a few weeks, and when I got home my printer will print is magenta ink. This cartridge has already shown as not empty and I just put in another. All the other colors print. I tried a reset partial semi, but not a hard reset. I tried to clean the print head and the connection of the magenta cartridge. Tried the cartridges via the cleaning program and also a second level of cleaning.

  Take a look at this HP doc.

  Use in the link to check your warranty status.

• HP Photosmart 7510 printer device

  It is supposed to connect wireless to my computer, but it doesn't. When I go in the list it there is no list Shaw. The manual says to press ENTER to turn on your computer, but I can find no "enter" anywhere.

  Hi, PennyWright,

  Have you installed print & scan doctor?  Select your operating system and install the software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5070121

  When you try to connect to a network with WEP encryption and shared key authentication, the product fails to connect.
  Installation of the software of the printer for a wireless network connection

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02900814&cc=us&DLC=en&LC=en&product=5070121#N612

• Photosmart 7510 prints only one page when I copy 2 sided-multipage document

  I have a two-sided 4-page document. I have placer place in autonatic tray, select Copy 2 head to head 2 and press "Black." All pages are scanned, but only one page (2 sides), one out. I expect all 4 pages 2 faces out. What's wrong?

  Thank you.

  You are right. This printer does not the ADF duplex scan. It will print a copy of the 2 sides but the face page of the first page front and back on the face of the first page printed copy pages and page of the face of the second duplex page on the back of the first page printed from copy. What a waste. Well, I need now to decide if I want to keep this printer or send it back since it's the LPB brand.

• HP Photosmart 7510 printer error 0:00759 c 98

  Regularly, I get this error message when I print.  It seems that something done my Backit Up Nero & Burn to launch that freezes the printing process and this error message is displayed.  Does anyone know how to fix this?

  Hi Shane

  Thank you.  It's a start.

  I am running Windows Vista SP2 64-bit edition.  The printer is connected by USB.

  No, I didn't communicate with Nero.  I got an error message on the printer and sought an explanation for that.  Only, I realized that it seemed related to Nero as I was describing events.  I did a search on the internet on Nero to see if anyone had similar problems, but did not come with anything.  I'll try to contact Nero, too.

  Thanks for your time, Shane.

• HP Photosmart 7510 won't use photo black ink

  I have a photosmart 7510 printer and I am printing from microsoft word 2010 on a windows 8. I print a word with no pictures in document. Printer preferences are on plain paper with normal quality. I can't the printer to use the XL Black ink cartridge. It only uses photo black ink. Is there a setting that I can choose to let him use the regular black ink?

  Hi shirsar,

  I understand that you have a Photosmart 7510 which seems to use a lot more than regular black ink black photo. I'm sorry to hear that, but think I can help you with a solution.

  You can set the printer to use only black ink when printing from the PC and ensures that it uses black ink and no ink picture. My instructions will be set up in the pilot if he does for all programs (if you just want to program it please let me know, and I advise you more). You'll want to start by going to your start screen, and simply start typing devices and printers, and you want to open that (if that is not in the work Panel type and then proceed to open devices and printers). Once the devices and printers is open, right-click on your Photosmart 7510 icon and select Printing Preferences. You'll want to then click on the Advanced Options button at the bottom right of the screen. The next page that appears will allow you to set the printer to use black ink only when printing from the PC (please follow the screenshot below for any clarification).

  

  Hope this helps, have a nice day!

• HP Photosmart 7510 copy two-sided documents

  My newly installed HP photosmart 7510 (model No. C311a) will not copy two-sided documents.

  Here's the story: on the screen of the printer, I went to copy > Settings and choose "2 faces".  After the first printing, side I put the original and replaced it in the charger.  After a break for the ink drying, the screen read "Copy...", but the original was not sucked into the feeder and the copy that came out had only the first side top.   I repeated several times with the same result.

  At no time did any alerts or error messages.

  I tried all the remedies suggested earlier:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-Photosmart-7510-won-t-print-double-s...

  I uninstalled all the drivers, etc of the CD included and downloaded and installed later from HP.  But no help!

  I went to: Control Panel > printers & faxes > series of HP Photosmart 7510. Right-click on the last, I have found no reference to "Restore preferences", "Reset Printing System", or "installation of printer," as mentioned in the previous post.

  On the homescreen of my computer, I clicked on the icon "Series of HP Photosmart 7510."  Assistant HP printer that has opened, I chose: the value of the preferences > series HP Photosmart 7510 printing preferences > advanced. At the last, I have reset print borderless to 'Print without borders', but it was also without success.

  I have Windows XP Pro. Any other suggestions?

  Hello

  AMPe #21 its manual implies that we should use the glass, NOT the ADF. I've tested this and it worked.

  I hope this helps.

• Web services does not work for Photosmart 7510

  I just bought a Photosmart 7510 printer and I CAN'T get e-print and web services to work.

  I already checked to make sure that the mapped IP addresses and I put a static IP address.

  There is no new update of the product.

  The utility application, your doctor, or whatever it is called found no errors.

  There is no proxy server so that option is out.

  I went through the troubleshooting step by step page, and nothing has worked.

  It will print all day long from my computer, but whenever I try to implement Web services, it says "unable to connect to Web Services. Confirm access to the internet and try again. »

  any further suggestions?

  Hello

  The servers are being updates not scheduled at this time. The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again. If this is not enough, let me know and I'll see what I can do.

• Photosmart 7510: Errors of inconsistency of paper photosmart printer 7510

  I am trying to print my 7510 by using custom paper sizes and get paper mismatch errors.  I use Word for Mac v. 14.4.8 on a Mac under OS X 10.10.2.  I went through all the tips in the HP support pages to try to fix this problem without success.  There is no firmware upgrades or updates of available driver I can find support/HP.  This error is more annoying.  I have not had this problem on my old printers I've foolishly got rid of upgrade to the all-in-one printer. Can you give me any help other than suggests to use the information on the support pages that did not work.  ! have created various paper formats customized in word to see if I could find a magical Assembly which will print and have had no success.  If someone cannot help me solve this problem, it will be the last HP printer that I buy.

  Full of hope for some real help.

  Hey @oldgt!

  Thanks for getting back to me!

  If you see only the media and the quality in the dialog box print, then that indicates that you are using the Apple Airprint drivers and not the pilot series Photosmart 7510.  If the printer does not have the correct drivers, it may not work properly from third-party programs such as Microsoft Word or Adobe Reader.

  To remove and re-add the printer using its drivers:

  1. Click on the apple icon in the upper left corner of the Mac
  2. Click on System Preferences
  3. Click on printers and Scanners
  4. Select the printer and press the minus (-) signs below the list of printers
  5. After removing the printer, click the plus (+) sign below the list of printers
  6. Click "add another printer or a Scanner.
  7. In the add a printer window, select your printer
  8. In the drop-down list 'USE' make sure you only select the series Photosmart 7510 and NOT Airprint
  9. Add the printer and try to print again

  

  

  If please, after back and let me know if this worked for you!

• "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

  "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

  Hi @artdahlink,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

  Maps:
  Card type / size chart

  • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
  • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
  • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

  NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

  There is no guarantee the implementation of a custom paper size to work, however, you can try this method

  • HP printers - creation of custom paper sizes

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.