HP Photosmart 7510 printer error 0:00759 c 98

Similar Questions

• Pavilion a6312p: Photosmart 7510 prints blank page

  I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

  I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

  Hi bankercop,

  I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

  Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

  Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

  I hope this helps you. See you soon!

• Photosmart 6510 "Printer Error" and all lights flash

  I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.

  When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.

  Symptoms:

  1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."

  2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"

  printer does not print

  3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer

  4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.

  Have you tried the following.

  1. hard reset (more than once - fired power and USB)

  2. uninstalled and reinstalled software and drivers

  For any help or suggestion will be appreciated.

  Possible solution

  I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.

  Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.

  Hope this helps someont with this problem.

• New PhotoSmart 7510 print does not correctly

  I have a new 7510, replacing one PhotoSmart more old.  I have 2 problems with printing.  First - when you print an email the top and bottom of the headings are cut, print off the page.  Is there a setting I can adjust for this problem?

  Second - when I print photos I get a small thin strip of white at the top of each photo.  I feel no margins selected in Picasa as well as in the printer settings.  I am an avid scrapbooking need full size 4 by 6 photos to print.

  I've never had these any of these issues with my old printer.  I hope someone has a solution for me.  Thank you.

  Hi shiftee,.

  Follow the troubleshooting steps in the document below and let me know what you find?

  Troubleshooting print quality problems

• HP Photosmart 8450 printing error

  I have installed my HP Photosmart 8450 (using the hp site because I don't have my original installation disk) & whenever I try to print anything (including a test page) I get an error message...

  Or 'Printing on HP photosmart 8400 error series' "S in an error state" printer"" "

  My computers (laptop) operating system is: Windows8 (64-bit)

  I have already tried to "Troubleshooting" & installed the print/scan doctor & he did his work & said there is nothing to detect & I continued with the test & still can't print.

  I know the printer is working because I can put sticks of memory in the printer & print directly from the printer (no pc), but it seems that the computer & printer just are not interconnected

  Hi belleeyes,

  I did some research on these errors and found that they can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. I recommend looking for defects found in the link below to fix the problem:

  http://goo.GL/kyNeX

  After clicking the link, read the introduction, then click on step 1. Check the hardware. If this does not help, go to step 2, etc.

• Photosmart 7510: Photosmart 7510 print offset of text to the right

  I use MS Word 2010 and when I print the text it seems 7 mm offset to the right. e.g. fixed left margin at13 mm starts printing at 20 mm, and right margin at19 set stop mm 12 mm printing. The same offset is displayed when you use other applications for example Publisher, Zara, Photoshop etc.

  Top, bottom, header and footer print exactly in the correct position.

  Of course, I can adjust margins to compensate for this error, but it is a bit a nuisanse and offends my sense of! I have had this printer for 3 years and the problem appeared right from the first day. I have other HP printers, but they do not display this problem. My printer is connected directly to the computer via USB.

  Hello @GreatSimms,

  Thanks for getting back to me on this subject. I'm sorry to hear that the steps I have provided could not solve the printing problem. If the impression is always shifted to the right that which usually indicate an alignment as the text is not aligned correctly on the page.

  Could I please have you run an alignment for me just see if that makes a difference.

  1. On the printer control panel, press the Setup icon (), and then tap Tools.
  2. Tap the align printer.
  3. After the compliance, prints an alignment page.
  4. The successful alignment is displayed. Press OK to exit the screen.
  5. Examine the printed alignment page. It should show all models of color - especially the black and blue patterns. The ink must not be streaked or indistinct.

  

  If the printed document appears to be centered, could I please have print you another document on your computer to verify that the problem has been resolved.

  Please let me know the result of the execution of the alignment. If the problem persists, there is an additional discount I have executed him. Good luck!

• Photosmart 7525e: print error message on the monitor, but PDF print OK

  W10 64 bit Office current with Windows updates.

  HP7525E connected via USB.  Current with updates from HP and exploit the full package of driver HP

  When I click to print a PDF file, I get a message popup Windows that quickly disappears, but the part of the message says «Error printing...» «or ' unable to print on...» ».  But the page prints OK anyway.  I have today when it appeared has clicked to print a Groupon in mode 2-sided but also chose to print only the current "page (and in my opinion, there is only 1 page).  Do not print in color, btw.

  A ran HP Print & doctor Scan that found no problems.

  Do not restart.

  Close the browser (Edge).

  Launch of the new browser and returned to Groupon.

  This time the same groupon (in monochrome) of printing simple face mode or mode 2 faces, that the error did not appear and the PDF printed fine as before.

  I have seen the error several times before but have not been studied.  I know I saw him several times when printing PDF files.  I don't remember if I saw it when you print other things.

  Completely uninstall Acrobat Reader on your system.  Now, go to Adobe and download and install Acrobat Reader DC.  Try now.

• HP photosmart 7510: print

  Help!  I hope I can explain this:

  I print on sheets 4 X 6 in a document created in microsoft word.  I would like to map main paper in the tray, press on print and he was there.

  My printer stop working so I reinstalled it.  Now, it resumes from the photo tray.  It's ok because I can put the cards in there.  My problem is, it will not print in black.  I went through all the color options and can not solve it.  I guess because my choice of 4 X 6 size, he thinks it's a photo.

  Any ideas?

  Thanks in advance

  Greetings @justdee1107,

• HP Photosmart 7510 prints not apps

  I can't get my printer to print from applications or by e-mail, but it prints from the printer Utilities window so I know it's the connection through wifi works. I have a brand new MacBook Pro. All of the suggestions. New Mac user.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Photosmart 7510: prints is magenta ink

  I was away for a few weeks, and when I got home my printer will print is magenta ink. This cartridge has already shown as not empty and I just put in another. All the other colors print. I tried a reset partial semi, but not a hard reset. I tried to clean the print head and the connection of the magenta cartridge. Tried the cartridges via the cleaning program and also a second level of cleaning.

  Take a look at this HP doc.

  Use in the link to check your warranty status.

• HP Photosmart 7510 printer device

  It is supposed to connect wireless to my computer, but it doesn't. When I go in the list it there is no list Shaw. The manual says to press ENTER to turn on your computer, but I can find no "enter" anywhere.

  Hi, PennyWright,

  Have you installed print & scan doctor?  Select your operating system and install the software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5070121

  When you try to connect to a network with WEP encryption and shared key authentication, the product fails to connect.
  Installation of the software of the printer for a wireless network connection

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02900814&cc=us&DLC=en&LC=en&product=5070121#N612

• Photosmart 7510 prints only one page when I copy 2 sided-multipage document

  I have a two-sided 4-page document. I have placer place in autonatic tray, select Copy 2 head to head 2 and press "Black." All pages are scanned, but only one page (2 sides), one out. I expect all 4 pages 2 faces out. What's wrong?

  Thank you.

  You are right. This printer does not the ADF duplex scan. It will print a copy of the 2 sides but the face page of the first page front and back on the face of the first page printed copy pages and page of the face of the second duplex page on the back of the first page printed from copy. What a waste. Well, I need now to decide if I want to keep this printer or send it back since it's the LPB brand.

• HP Photosmart 7510 copy two-sided documents

  My newly installed HP photosmart 7510 (model No. C311a) will not copy two-sided documents.

  Here's the story: on the screen of the printer, I went to copy > Settings and choose "2 faces".  After the first printing, side I put the original and replaced it in the charger.  After a break for the ink drying, the screen read "Copy...", but the original was not sucked into the feeder and the copy that came out had only the first side top.   I repeated several times with the same result.

  At no time did any alerts or error messages.

  I tried all the remedies suggested earlier:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-Photosmart-7510-won-t-print-double-s...

  I uninstalled all the drivers, etc of the CD included and downloaded and installed later from HP.  But no help!

  I went to: Control Panel > printers & faxes > series of HP Photosmart 7510. Right-click on the last, I have found no reference to "Restore preferences", "Reset Printing System", or "installation of printer," as mentioned in the previous post.

  On the homescreen of my computer, I clicked on the icon "Series of HP Photosmart 7510."  Assistant HP printer that has opened, I chose: the value of the preferences > series HP Photosmart 7510 printing preferences > advanced. At the last, I have reset print borderless to 'Print without borders', but it was also without success.

  I have Windows XP Pro. Any other suggestions?

  Hello

  AMPe #21 its manual implies that we should use the glass, NOT the ADF. I've tested this and it worked.

  I hope this helps.

• Web services does not work for Photosmart 7510

  I just bought a Photosmart 7510 printer and I CAN'T get e-print and web services to work.

  I already checked to make sure that the mapped IP addresses and I put a static IP address.

  There is no new update of the product.

  The utility application, your doctor, or whatever it is called found no errors.

  There is no proxy server so that option is out.

  I went through the troubleshooting step by step page, and nothing has worked.

  It will print all day long from my computer, but whenever I try to implement Web services, it says "unable to connect to Web Services. Confirm access to the internet and try again. »

  any further suggestions?

  Hello

  The servers are being updates not scheduled at this time. The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again. If this is not enough, let me know and I'll see what I can do.

• HP Photosmart 7510 won't use photo black ink

  I have a photosmart 7510 printer and I am printing from microsoft word 2010 on a windows 8. I print a word with no pictures in document. Printer preferences are on plain paper with normal quality. I can't the printer to use the XL Black ink cartridge. It only uses photo black ink. Is there a setting that I can choose to let him use the regular black ink?

  Hi shirsar,

  I understand that you have a Photosmart 7510 which seems to use a lot more than regular black ink black photo. I'm sorry to hear that, but think I can help you with a solution.

  You can set the printer to use only black ink when printing from the PC and ensures that it uses black ink and no ink picture. My instructions will be set up in the pilot if he does for all programs (if you just want to program it please let me know, and I advise you more). You'll want to start by going to your start screen, and simply start typing devices and printers, and you want to open that (if that is not in the work Panel type and then proceed to open devices and printers). Once the devices and printers is open, right-click on your Photosmart 7510 icon and select Printing Preferences. You'll want to then click on the Advanced Options button at the bottom right of the screen. The next page that appears will allow you to set the printer to use black ink only when printing from the PC (please follow the screenshot below for any clarification).

  

  Hope this helps, have a nice day!