HP Photosmart 7520 cut above pictures off

Similar Questions

• Journal print - Photosmart 7520 fax auto shut-off

  As a topic, how to prevent faxes print log after each shipment?

  A previous answer for another model is not applicable for the 7520.

  TIA.

  Update... No joy with the FW update, so a new printer is provided.

  I hope that I just got a bad first & the replacement will be just fine.

  --------------------------------------------------------------------------------

• Photosmart 7520 - how to turn off the auto answer fax

  I saw a place during the setup of the fax where I turn the auto answer fax.  Default is ON.  I use the same phone line for voice/fax calls.  So, how can I turn it on and out easily so do not get to the appellants the fax unless I want what they?  Thank you!

  Hello

  To disable the function of Auto years you will need to set up fax

  Press the fax on the Control Panel icon

  Fax Setup > set up the fax base > Auto answer > power

  Hope this helps

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

  7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

  nothing is dead.

  Hi woldtopper,

  I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

  If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• PHOTOSMART 7520 GOING 'OFF LINE' IN ENERGY SAVING MODE

  My Photosmart 7520 is connected wireless to my HP Envy laptop m6 running Windows 8.  When turned on, it works.  I can send print jobs to the printer from my laptop and print.  But after the printer has been in this is the mode to save energy for a few minutes, the printer goes offline and I can't get this back online on the computer.  The error message on the computer, it's that the computer cannot communicate with the printer.  The only way to get it printed again is that I do, at the printer, release the mode 'sleep' and then turn it off and then new.  (Automatic shutdown is DISABLED as long as the printer on a wireless network).

  I had, during the last months of 2 1/2 a number of HP technicians has check the settings of the printer, the parameters of my laptop and HP even replaced the printer for me.  But I still have the problem.  Is that how the printer is supposed to work, is it a default in printers and is there a solution?

  OK, that's weird, it's a decent router.  Is its firmware updates?

  Have you set the static IP address in the printer or router?

• Off message paper on Photosmart 7520

  When I try to print or copy, I get an out of paper message. This happens in the bins to plain paper and photo paper.

  Hey there @dlzcpa , I hope you're well

  I read about the error "on paper", you are faced with new and I would say following the same steps as before. Here is a link to your message more former where @Bob_Headrick had suggested measures for you: accepted Solution Photosmart 7520 out of paper message

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see other possibilities for you, as a replacement or trade.

  If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada, region of: click here.

  Have a great Tuesday!

• ePrinting of Android to PhotoSmart 7520 mode landscape?

  Hello... I recently bought the PhotoSmart 7520 and have everything set up.  I have a Samsung S4 phone and a Tablet from Samsung 10.1.  I downloaded from the Google store to play on two of them - HP ePrint and All-in-One-remote control

  I tried both of these apps to print on the printer.  They both work, but I can not on any of the applications or ffrom either device figure out how to change it to print the image in a profile of landscape.  It will print on paper 4 x 6 "but NOT landscape profile (hopefully, you know what I mean)... There is a white bar at the top and bottom of the image.

  Or, once there, I had to print on the whole sheet of 4 x 6 but rather as a * landscape * style of shooting was like a * portrait * image type.  When you want the other way, he eventually cut the picture and giving you a skinny view.  Is there a way for the application to change the landscape that I have not found?

  It seems so weird that a photo printer would be missing this option.

  Thanks for any info

  For now, there is no option to choose landscape or portrait settings.

• Photosmart 7520 Embedded Web Connect service administrator and password you

  I have a Photosmart 7520 and am trying to use the built-in Web Services to change some settings.

  When I do so a window opens asking me to enter the user and the password. I don't remember setting this up.

  I tried:

  1 user: admin password: [blank]

  2 user: admin password: admin

  3 user: admin password: password

  I repeated the same thing but typed in Admin instead of the admin for the above 3 options.

  None of these work. I have searched everywhere for a solution but nothing.

  I tried to see if I could reset the printer in a State that is then was in when I first unboxed again. The only advice on this for my printer are to press the off button to turn off the printer, unplug, wait a minute and start again. Who has not solved the problem either. The printer completely reset the value by default when it has first been unpacked and none of these options of above user password worked.

  Nothing in the user's manual on this.

  Extremely frustrated after spending three hours of a Sunday in trying to solve this problem. Very bad!

  Please check your Inbox.

• Photosmart 7520: Impossible to analyze the documents of legal format on HP7520

  I've read the post of the so-called solved this problem, but NOT for me.

  I use Photoshop > import > HP Photosmart Twain... I have setup the parms legal analysis and I have the document using the charger from the power supply.

  It scans but cut above the bottom.

  I am unable to find any setting in the printer to be configured for legal size, I suppose that the charger has NO need!

  I'd appreciate your help!

  Thanks in advance for any help!

  Hello there @Skoutariotis , I hope you're well

  I read on digitization as legal size problems you are currently experiencing and wanted soft hand with my suggestions.

  The Photosmart 7520 should be set to analyze the legal size through to choose parameters in the HP scanning software, I posted below as an example.

  If the options are not in your printer software as described, perhaps the full functionality driver and the software is not installed, which you can download and install it here: HP Photosmart 7520 e-all-in-one printer full feature software and drivers

  You can also check for a firmware update and complete if necessary, which can help as well:

  Get the latest Firmware and updates

  You should see the option to select to analyze as legal size in the printer software.

  I hope this helps, have a wonderful weekend

  

• Photosmart 7520: Scan to email - server connection error

  Apologies for another post on this subject, I worked my way through the various fixes but none have worked.

  Scan to e-mail worked very well - we use it quite regularly. Then, about 3 or 4 weeks, we got our first message "error server connection." I'm not aware of nothing to bud in our home network, where we use the printer.

  A moden is connected to an Airport Extreme (82.1.132.1, DNS 194.168.4.100 IP / 194.168.8.100). The printer is connected wireless. We can print and I see that the printer is registered on the network.

  I tried:

  1 Manual IP and DNS: IP 10.0.1.249, DNS 8.8.8.8 / 8.8.4.4

  2. as stated above, but DNS changed to 194.168.4.100 / 194.168.8.100 - the same as AirPort Extreme

  3. automatic IP (10.0.1.7) but manual DNS (both variants above).

  After each change, I stop, wait and restart the printer.

  Printer series no TH417710CJ05YY

  Firmware ELM1CN1434BR

  Version of the firmware fix 20

  Country/region 31/1

  Any suggestions?

  Thatnks for taking the time to read this post.

  Hello

  My apologies for jumping.

  For HP to feature Web Services, firmware ELM1CN1607AR must be installed for the printer.

  Download and install the latest firmware below, then check for the difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Kind regards

  Shlomi

• HP photosmart 7520: HP photosmart 7520 unable to connect to web services

  I am also having this problem. I tried the solutions above. Can you also send the solution for me?

  drzman1

  Welcome to the Community Forum of HP.

  I don't know that to which you are referring - he could be the following:

  By PrintDoc Web services

  PhotoSmart 7520 does not connect to "Web Services"

  You can take a look at the suggestions already provided - they are likely valid for your situation.

  I can also offer you the following:

  Reset Web Services in ePrint printer

  • A method essentially provides the procedure that you find in PrintDocof wire,
  • Two method explains one more 'standard' reset Web Services approach.

  ============================================

  If you are in the USA or the Canada, you can call using Cloud Services.  I suspect that they can help during normal hours, but you can certainly call anytime and see if help is available:

  When to call HP Cloud Services and when to call HP Tech Support

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

  This e-all-in-one printer from HP Photosmart 7520 bought last week and cannot issue to reslove the awakening. Printer goes to sleep as the value, and to wake up, BUT with an error message on the display. I tried AUTO ON / OFF and different sleep wait times but nothing helped.  I can't believe the USB cable or the PC/software is to blame because the wake-up printer, but in a State of dysfunction and should now be in the off position, then press. The answers to this problem.

  JMcKenzie2006,

  Welcome to the HP Forum.

  The following workaround solution should correct the problem - basically how to turn off the sleep function.  It works when all other options have failed to solve the problem: assigning static IP, small insect sacrifice, swearing, all sorts of settings...

  Be aware: I do not know the consequences - if any - turning off the sleep function.

  Printer PhotoSmart 7520 loses wireless - system Mode Timeout Set to zero

  Apologize up front for imprecise language and the way in which this must be done: is a solution and not a standard procedure.  Its use is optional.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• How to install 2 HP Photosmart 7520 printers on a computer?

  Product: Photosmart 7520

  OPRN Sys: Windows XP

  Error: n/a

  Changes: no

  Printer is HP Pavilion a1310n computer

  I have a Photosmart 7520 installed on the computer that the above.  I would like to install an another 7520 on the same computer.  Ykou can provide instructions on how to do it?

  Hi TomHaynes,

  All you have to do is run the setup.exe file to install the second printer, and once installation is complete, you should have another icon of the printer to the printer second in devices and printers.

• HP Photosmart 7520 printer while a (flashing)

  I have a HP Photosmart 7520 printer all-in-one. It lights itself with flashing lights and an error to turn the printer power off and start again. I followed instruction and turn the printer off. Reverse in the printer of the room is lit, flashing with error to turn off the printer. So I unplug the printer. Help

  I had already unplugged printer and reboot so that solved my problem for now.