HP Photosmart B110: HP Solution Center cannot run because your device installation is not complete

Similar Questions

• "Solution Center cannot work because your device installation is not complete."

  I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete."  Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

  1. download and install the following update

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

  2. type % temp % in the field of race

  3. Locate and open the folder starting with 7z (example: 7zS2356)

  4 open the Util folder

  5 open the CCC folder

  ...

  ...

  .. but is there a "Util" folder in the folder starting with 7z...

  I don't have a disk, rather downloaded the software.

  It sucks, any other suggestions...?

  I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

  Thanks in advance for any help!

  I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

  10. run the download to reinstall the printer

  So I'm pumped it worked, but why is this problem even occurs?

• "HP Solution Center cannot work because your device installation is not complete."

  I worked on it for about 8 hours now and I eventually give up. I can't have the hp Solution Center to work. Help, please.

  one is an hp photosmart d110a with wireless. operating system is windows 7 Home premium 64.

  I have already tried:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  10. run the download to reinstall the printer

  Help, please. It's very, very frustrating.

  Alasdair

  Hi alasdair,.

  Here's what we need to do at this point. We need to focus on a single computer, and then once we got this computer work we can work on the other. Follow the document of Fatal error 1603 to disable all your startup programs and then perform the steps in scrub on the XP computer. When you try to reinstall the printer, I want to connect to the USB printer until we try to connect it wirelessly.

  I would like to know what is happening?

  Fatal error ' error 1603

  Note: Do not use any software you have already downloaded. Download the full features software again from the link I provided below.

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  E-all-in-one printer, HP Photosmart - D110a - XP range:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80511-1&cc=us&DLC=en&LC=en&OS=228&product=4023246&sw_lang=

  HP Officejet 5610 - XP:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-35363-2&CC=US&DLC=en&LC=en&os=228&Product=441125&sw_lang=

  10. run the download to reinstall the printer

• HP solutions Center can not run because your device installation is not complete

  OfficeJet Pro L7580 Windows 7 pro 32-bit

  I think I have the latest version of the software - ojprol7x00_full_14.exe (394, 498kb)

  I've upgraded from Vista to Windows 7

  I went up on the HP site and downloaded the dot4patch_reboot.exe Patch and he ran.

  It has not solved the problem

  Of course, I could use some help.

  Problem is solved,

  I ran the scrubber and reinstalled the software from scratch.

  The center of Solution works now

  Thank you

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• HP F2280 all-in-one: F2280 Solution Center cannot run

  I can't get the Solution Center to run so that I see the ink level, but I can print fine, well, I have it started printing strangely so want to first check the ink levels, but it is another question.

  My laptop is a Lenovo G50, but I got it running on a previous laptop.

  I went on HP website, downloaded the appropriate software and drivers with the usb cable plugged in all the time, but it came with the message:-

  "HP Solution Center cannot work because your device installation is not complete...". "etc.

  I tried to go through the solutions already here but could not get to work or the other.

  Thanks in advance

  He sussed!

  I tried to recall what (if any) I did differently between the two total uninstall and reinstall and remembered I unchecked intentionally some of the boxes of things to install on the last snack he disliked some of them for a reason-it was the opposite, if they stayed all checked, then it installed fine Open the center of Solution and print fine - PHEW.

  Thank you very much for you help!

• HP Solution Center cannot run

  I'm used to be able to scan by going to the HP Solution Center on my laptop computer and direct the printer to scan.  All of a sudden I get a message "HP Solution Center cannot work because your device installation is not complete," How can I get this fixed?

  Hey, no problem that's why I'm here.

  Steps to follow:

  1. go to the start menu

  2. Select all programs

  3. find the HP folder

  4. choose HP photo file in the folder "HP".

  5. then select uninstall

  6. go through the process of uninstalling the software

  7. it should ask you to reboot the laptop

  8. after starting the laptop back up go to thislink.

  9 install the drivers on this page. You must click Download and save the installation on your desktop.

  10. once the download is completed you can access it from your desktop. Double-click the icon.

  11. the installation should appear and proceed with the download.

  If you have any questions during the download, let me know.

  THX

• I can't scan and my says hp solution cannot run because the device is not complete

  I use windows 7 64 it. My printer is HP Photosmart all-in-One Printer - C510a eStation. I use a laptop and a wireless network. Earlier my printer wasn't working, so I reinstalled the program using the cd, but now the hp solutions don't work and I can't use the scan operation. When I try to use the scan on the zeen function it just says: I am unable, and to use the software of the printer came with. I don't know what to do. I have to be able to scan, but also print. I don't want to uninstall or reuse the cd because it took hours for me to feel like work. Please help and thank you

  Hello frustrated_37,

  Based on the description of yourself, I recommend 2 steps mentioned below...

  1. Run the s/w CD, you will be prompted with options such as adding a device, install more software etc... Click on "Install more software", click on "HP Solution Center" if it is present.
  2. Root access file middle for scanning to work. To do this, you must click START > computer > program (x 86) > HP > Digital Imaging > Bin . Locate the hpiscnapp.exe file, do a right click on it and then "send to desktop" > Desktop (Createshort Cup).

  Double-click the created short that would open the scanining interface.

  Kind regards

  Jabzi

  Help the community by marking this post as a Solution If it has solved your problem!.

  If my post helped you somehow, please click on the blue KUDOS star under my name!

  Although I work for HP my messages and responses are mine.

• Windows Installer Cleanup Utility cannot run because corrupt Microsoft installation Service

  I can't get the Microsoft Installer Cleanup utility to run, I get an error message "the Microsoft Installer could not access the Service."  I tried re-registration of the service nothing is done.  I work on a customer's computer and can not get KB2467173 or Windows Live Essentials update, so I am unable to run internet explore in the standard 32-bit functionality.

  I would avoid reinstalling Windows if possible.

  Note: Windows Installer Cleanup utility is no longer supported and is not available via a Microsoft page.

  Comment: If your client is in the habit of running "Registry cleaners", a clean installation of Windows will be your only recourse.

• HP Photosmart program does not "device installation is not complete.

  I have HP Photosmart Essential on my Windows 7 computer. All of a sudden it can't load it.  It says device is not complete, and sometimes this system has no minimum requirements. I can't download the program because of the minimum requirements. Any ideas. Thank you

  You can try a number of things:

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  You can try to copy the contents of the installation files if its on a drive on your hard disk in a folder and browse the folder, right-click on the configuration file, and then click Run as administrator.

  Use another program like Windows Photo Gallery.

  Download Windows Essentials 2012 (Offline Installer)

• My Asus Ultrabook said the first items 10 Download "this application cannot run on your PC" and will not open the installation program (although I PSE10 work)

  I'm under Win 8.1.  I have no DVD player, so I downloaded.

  Originally, the 2 #1 download has an extension of ".7z".  I've changed that in '.exe '.

  change back to .7z.

  then download the file 2 of 2 (exe), place the 7z and exe in the same directory and click (or double click on) the exe file.

• Photosmart C3140: (Photosmart C3140) HP Solution Center does not work on my system after upgrading windows8.1

  When I try to launch the HP Solution Center, get the error like - "HP Solution Center cannot work because your device installation is not complete. Please connect the USB cable or re-run the Setup program from the installation to a network installation CD. "If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the Start Menu.

  HP Solution Center worked very well with Windows8. Windows updates updated Windows8.1 and Solution Center stopped Frank.

  Any suggestions to fix this? What is the Windows8.1 question upgraded or because of something else?

  Appreciate any help.

  Hello PradhanAK,

  You may need to uninstall the existing printing software.

  Restart the PC.

  Please, download and run the Installer printer HP www.hp.com/go/tools

• Photosmart 2575: HP Solution Center does not work

  I recently got a new PC with Windows 8.1.
  After installation of my printer HP 2575 (purchased in 2006) with the Setup file recommended AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I discovered that the HP Solution Center did not work.
  I received the message that the printer was not found.
  But printing works perfectly, so that the part of the installation was successful.
  I tried to uninstall and reinstall the printer in many ways, including:
  -Uninstall using Uninstall_L1.bat, Uninstall_L2.bat, Uninstall_L3.bat, with reboot between the two.
  -Installation of the printer driver just in a first time, then installation of the center of HP solutions after reboot.
  The result net is now HP Solution Center shows "HP Solution Center cannot start because your device is incomplete." When I try to start it (so it's even worse than before).
  V4.7.0.29 HPPSdr.exe print and Scan doctor says, "a later version of the program is available for this product.
  When I use HPSupportSolutionsFramework - 11.51.0049.msi to identify the right driver, I get the same AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe driver file that I have already installed.
  Let HPPSdr.exe begins to extract what he considers the right driver gives the file AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I already downloaded.
  I have not actually tried to use the downloaded file, because the download crashed when only a few MB left.

  @Carl-H,

  Welcome to the HP community!

  I will do my best to make some useful suggestions in order to get the Solution Center installed and running on your system Windows 8.1. Please first test best in the printer, as this will show us if there are hardware problems, what could be the cause of all the failures of software.

  If copies seem to be working, try the following steps:

  1. perform a clean boot, restart the PC and try to run the installation.

  2. use the tool File Checker system for lack of repair or corrupt system files , run the scan to find the files corrupted on your computer. You can run the scan up to three times to see if he'll get all the bugs.

  3 cancel the registration and re - register the Microsoft Windows Installer service:
  1. click on the Start menu and type "cmd" in the search field and press ENTER.
  2 type "msiexec /Unregister" and then press ENTER.
  3. Type "msiexec/regserver" and then press ENTER.
  4 reboot your PC and try the install again.

  4. create a new profile user account with administrative privileges on your PC and run the Setup from there to see if it is correctly executed.

  Let me know the results, good luck

  Say thank you for the answer by clicking on the thumbs upwards

• HP photosmart C4780: Hp Solution Center

  I have recently upgraded to Windows 10 and now I can not scan from my computor using HP solution center app as before in windows 7. I tried several times following the instructions from HP. A problem in trying to uninstall the existing software, it will not be completed. When I try the solution Center HP it says that the software did not complete the installation. What is a windows problem or HP?

  @Research1,
  Welcome to the HP community!

  I hope I can help you with the problem you're faced with uninstall and install your Photosmart C4780 on Windows 10, such that the software displays an error message indicating something of the order of "HP Solution Center cannot work because your installation of the device is not complete." Here are my ideas for you to try!

  #1

  • Perform a level 3 uninstall if you have an HP computer or a level 4 uninstall if you have a computer not HP.

  1. click on start and type %temp%, enforcement

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run L3uninstall.exe (or the .bat file). If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads .html

  9 download drivers and full software functionality again, or run the HP printer install Windows Wizard to install the printer

  10. run the download to reinstall the printer and try to open again the HP software

  #2

  Run the print and scan the doctor. This diagnostic tool will check for all the conflicts that could be the cause of the problem and are working on fixing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  #3

  Scan a System File Checker to repair corrupt files sytem: run the command SFC to repair system files

  #4

  Run a disk check: running CHKDSK in Windows 10

  I can't wait to hear the result on your part, and I hope that my ideas are useful!

  If you want to testify of my answer to help today, click on the thumbnails below and if these steps help you to find a solution, click on the button "Accept as Solution" if others in the community can easily find our messages.

  

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi