HP solutions Center can not run because your device installation is not complete

Similar Questions

• HP Photosmart B110: HP Solution Center cannot run because your device installation is not complete

  Since the recent 10 upgrade Windows HP Solution Center no longer works.  After the initial Welcome screen, it says "HP Solution Center cannot work because your device installation is not complete."

  The following tips on previous discussions and the support centre, I tried uninstalling and reinstalling several times printing software.  I ' v has also ensured that adobe Reader DC is up-to-date.

  Printing and scanning are fine from other programs.

  Any ideas?

  Hello

  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  Download the software COMPLETE features here.

  Let us know if it works!

• HP solutions Center can not run because my series D110 printer AIO installation is not complete

  HP solutions Center can not run because my series D110 printer AIO installation is not finished? Please help me solve this problem! Thank you very much!!!

  Hello, I'm sorry you have a problem with your solution center. You can uninstall and reinstall the drivers and full software features.

  This should solve your problem. Here is a link that can help you to download the drivers. Make sure that it is FULL of FEATURES software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4023246#n212

  Choose your operating system, and then click NEXT.

  Let me know if it helps.

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• Installation of device HP Solution Center is not complete

  I have a PhotoSmart C7280 all-in-one printer works as a printer in Ethernet network.  My PC is a HP Pavilion Slimline s5280t running Windows 7 Pro 64 bit.  I had the printer for longer that I had the Pavilion.  I use HP Solution Center at least once a month to copy documents in PDF format for a job that I have.  Yesterday, I tried to use it and got the error "device is not complete.  Uninstall and reinstall HP Solution Center did not work.  I did some research on the forums and found the discussion of «records starting with 7Z.»

  I ran the Uninstall_L3.bat last night. He uninstalled everything.  I then downloaded the drivers on the HP site, once again. When I ran the installation, it failed because "a file is missing.  He has not said what file.  He created a 'solution' for me, basically going through all the steps to make sure that the printer and the router are working (they are) and the printer was on the network (IE).  I then downloaded the drivers AGAIN and again ONCE had a "missing file" error on installation.  And my printer has been uninstalled.  And I have a NEW suggestion from HP that I should reinstall after turning off all my startup tasks and reboot.

  If the driver package for the C7280 is defective and right now I'd bet money that it's telling me to turn off my startup list, which has not changed in the month, will not help.  Because my printer is no longer under warranty (hey, my PC is out of warranty), I don't expect any help from HP.  I hope that some other users will be able to offer something that will work. I'm about to go back on the CD supplied with the printer and install from that.  Help?

  Sorry, you had a difficult time getting the solution center to work.  You have certainly done all the basic steps and advanced to make this work.  I always keep a forum post stored on my computer that supports troubleshooting the solution at a different level of the Art Center.

  -HP - SOLUTION Solution Center installation problems! --

  I recommend reading this post to review the comments and see how to play the stages and how some problems are exposed.  Certainly, it treats missing files that you referenced.

  I usually just scan using paint or Windows Fax and Scan as soon as I can print as it is just a little more easy to work in the registry of a HP computer.  So please be careful if you choose to go in the registry.

  First thing first, I recommend you to create a different user account in the control panel with the admin rights, then by running the installation disk in the second user account before you attempt anything in the post on the forum above.  This will eliminate any conflict from previous attempts on the main user account.

  I really hope it works for you!  Let me know error messages that you get when installing with the disc.

• "Solution Center cannot work because your device installation is not complete."

  I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete."  Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

  1. download and install the following update

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

  2. type % temp % in the field of race

  3. Locate and open the folder starting with 7z (example: 7zS2356)

  4 open the Util folder

  5 open the CCC folder

  ...

  ...

  .. but is there a "Util" folder in the folder starting with 7z...

  I don't have a disk, rather downloaded the software.

  It sucks, any other suggestions...?

  I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

  Thanks in advance for any help!

  I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

  10. run the download to reinstall the printer

  So I'm pumped it worked, but why is this problem even occurs?

• "HP Solution Center cannot work because your device installation is not complete."

  I worked on it for about 8 hours now and I eventually give up. I can't have the hp Solution Center to work. Help, please.

  one is an hp photosmart d110a with wireless. operating system is windows 7 Home premium 64.

  I have already tried:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  10. run the download to reinstall the printer

  Help, please. It's very, very frustrating.

  Alasdair

  Hi alasdair,.

  Here's what we need to do at this point. We need to focus on a single computer, and then once we got this computer work we can work on the other. Follow the document of Fatal error 1603 to disable all your startup programs and then perform the steps in scrub on the XP computer. When you try to reinstall the printer, I want to connect to the USB printer until we try to connect it wirelessly.

  I would like to know what is happening?

  Fatal error ' error 1603

  Note: Do not use any software you have already downloaded. Download the full features software again from the link I provided below.

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  E-all-in-one printer, HP Photosmart - D110a - XP range:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80511-1&cc=us&DLC=en&LC=en&OS=228&product=4023246&sw_lang=

  HP Officejet 5610 - XP:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-35363-2&CC=US&DLC=en&LC=en&os=228&Product=441125&sw_lang=

  10. run the download to reinstall the printer

• Laser Jet 200 M276NW: Download says HP Solution Center was not complete and can not run HP laser 200 jet

  I went to open the Hp Solution Center and they say that the software is incomplete and does not work.   I've uninstalled and reinstalled the software 6 - 8 times and also used the disc installion with download of the latest device drivers.   The complete when said software loading but will say incomplete when you open it from the desktop.  I also ran the Hp disk and scan doctor says that it is working properly.  I found the issue when I tried to scan a receipt and couldn't do it because the center woulld solutions does not work.  I really don't want not ot spend 2-3 days, trying to get the HP software at work might as well by another printer next time. The cost to try to understand this one is huge.

  Hello

  The HP Solution Center application isn't only a part of the software of inkjets, is no part of the Laserjet 200 printer.

  If you don't have any other HP printer, the HP Solution Center was part of your previous printer, and as there is just no such printer not connected such an error is expected.

  For the HP Laserjet 200, click Start > programs > HP > HP Laserjet 200 M276 and launch of HP scanning application, which will allow scanning using your current printer:

  Kind regards

  Shlomi

• HP solutions Center can not scan, scan to preview works nor, error code 4, [(3,42,0)]?

  HP Elitebook p 8460, business management Win 7 (64).

  All-in-one, HP Officejet 5610 (no initials).

  5610 works properly, it can scan via buttons, copy via buttons, can be used as a printer with no problems.

  Center solutions HP see the 5610, reads ink levels, seems to work ok for everthing BUT sweep.

  HP Soltuon Center starts scan, guests to the default values, once selected all hae, he proceeds, the 5610 appears to be scanning (I hear it move scanner) but the software does not.

  The scan preview window appears but is a smaller rectangle and cannot be resived or even not selected, no menu drop downs seems to work.

  After 30 seconds or more, the error message appears, a yellow triangle with "!" in it...

  reading...

  An error has occurred in the scanner software.  Try the following steps.  After each step, try to scan the image... then reboot, restart, reinstall... tried all, same error.

  Raise the HP printer and Scanner Utility Dr, he ran, he said I need an update, installed the update, revived 'Dr', he said everything was fine (past all the test), test analysis resulted in the same error.

  I never had this on Win XP, but I was never able to make it work under Win 7 on this computer.

  In fact, I had forgotten I had recorded this problem (from September last year).

  I tested the scan function again and it seems to work fine.  I does no change, but this does not mean that I have no updates that may have solved the problem.

  Solution Center still does not show ink levels, but by going to the printer Kit, ink level estimates are displayed (possible solution).

  Please consider this problem solved for me.

• HP 6500 Solution Center will not complete installation

  Hello:

  I was forced to reinstall the printer driver for the HP all in a 6500 because the fax feature would not work on several occasions.  After uninstalling and reinstalling the software on 3 occasions, I asks me to turn on the printer and plug in the USB cord.  I do this, but the software installation guide will not let me continue.  The 'next' button is grayed out.  I have to check the box indicating "finish the installation later.  After you select this option, the 'next' button is now available to choose.

  Because I choose Finish the installation process later, I can't launch the solution Center program.  I constantly get a message indicating that it does not start because the device is not complete.  He asks once again connect the cable that it is.  There was a patch update available software that ran when dealing with network connection, but it does not solve the problem.  What should I do now?  I have a printer that I can't use.

  Thank you...

  Hello jolly_mon,

  Please go to this page, which has options to choose your operating system.  Once you do, please select the option that matches your scenario and then perform the troubleshooting steps and let me know if it helps to solve your problem.

  Good luck!

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• HP Solution Center does not start after the installation of IE 9

  HP Officejet 7400 all-in-one

  Windows 7 32 bit

  The HP Solution Center error message

  HP solutions Center can not run because your device installation is not complete.  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.  If it does not complete the installation or if you do not have the CD, access the HP help files by clicking on the start menu.

  I've had my laptop of HP EliteBook 6930p about a month ago.  I installed the drivers and the complete HP software from HP. com without incident.  My PC came with IE 8.  Some malware named Babylon.exe infected with IE 8.  I was able to remove my registry, but caused persistent problems with IE 8.  Microsoft suggested that I have installed IE 9, which I did.   The next time I tried to use the HP Solution Center (for scanning a document), I got the above error.

  Thank you 007OHMSS (catchy name you have!)

  I thought that I had uninstalled and reinstalled the printer before I submitted this request for support forum.  However, I went back and tried again, this time using the software uninstall HP all-in-one at ALL.   I've also disabled my anti-virus from Symantec during the uninstall software, reboot and reinstall process.

  NET - the second time to work.  I seem to be without problem!

  Thank you!

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• HP Solution Center: my HP Solution Center does not work

  My Center solutions HP for HP Photosmart Wireless e-All-in-one printer - B110a does not work. It worked perfectly until a few days ago...

  The message says:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  "If it does not complete the installation or if you do not have the CD, access the HP help by clicking on the start menu files.

  I tried to download the software from HP but without success.

  I don't have the CD to reset the printer.

  Any solution?

  Thank you very much

  Hi @Farigola,

  Welcome to the community of HP.

  I understand that you can not use the computer Windows 10 HP Solution Center. I will do my best to help.

  Here is a link to a few troubleshooting steps that I recommend you try. When you open the link, scroll down to the section titled ""HP solutions Center can not run"or"Scan is busy or in use"error with a network-connected printer»

  HP printers - upgrade Windows 10, printer problems occur after the

  Please, try the steps and get back to me with the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• Photosmart 2575: HP Solution Center does not work

  I recently got a new PC with Windows 8.1.
  After installation of my printer HP 2575 (purchased in 2006) with the Setup file recommended AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I discovered that the HP Solution Center did not work.
  I received the message that the printer was not found.
  But printing works perfectly, so that the part of the installation was successful.
  I tried to uninstall and reinstall the printer in many ways, including:
  -Uninstall using Uninstall_L1.bat, Uninstall_L2.bat, Uninstall_L3.bat, with reboot between the two.
  -Installation of the printer driver just in a first time, then installation of the center of HP solutions after reboot.
  The result net is now HP Solution Center shows "HP Solution Center cannot start because your device is incomplete." When I try to start it (so it's even worse than before).
  V4.7.0.29 HPPSdr.exe print and Scan doctor says, "a later version of the program is available for this product.
  When I use HPSupportSolutionsFramework - 11.51.0049.msi to identify the right driver, I get the same AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe driver file that I have already installed.
  Let HPPSdr.exe begins to extract what he considers the right driver gives the file AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I already downloaded.
  I have not actually tried to use the downloaded file, because the download crashed when only a few MB left.

  @Carl-H,

  Welcome to the HP community!

  I will do my best to make some useful suggestions in order to get the Solution Center installed and running on your system Windows 8.1. Please first test best in the printer, as this will show us if there are hardware problems, what could be the cause of all the failures of software.

  If copies seem to be working, try the following steps:

  1. perform a clean boot, restart the PC and try to run the installation.

  2. use the tool File Checker system for lack of repair or corrupt system files , run the scan to find the files corrupted on your computer. You can run the scan up to three times to see if he'll get all the bugs.

  3 cancel the registration and re - register the Microsoft Windows Installer service:
  1. click on the Start menu and type "cmd" in the search field and press ENTER.
  2 type "msiexec /Unregister" and then press ENTER.
  3. Type "msiexec/regserver" and then press ENTER.
  4 reboot your PC and try the install again.

  4. create a new profile user account with administrative privileges on your PC and run the Setup from there to see if it is correctly executed.

  Let me know the results, good luck

  Say thank you for the answer by clicking on the thumbs upwards