HP photosmart c4795 detects not paper

Similar Questions

• Photosmart C4795 prints not (most of the time)

  I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. Installation (with the Vista computer) went well, and all tests and some documents on the XP one and myself. After a few months, he started to give me a "document not found question '. I discovered that I needed to push hard enough to get the book far enough, but not too far. Now (on the XP computer) it says its printing, extracted in the document, then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is a HP Mini 1000, and HP update doesn't change anything.

  I got to work by sending the document again, and then cancel the print job wrong on my computer, and after that it was cancelled on the computer to cancel on the printer. At the point where the paper ejected I placed it on the tray at a time an inch away where I was told in the animations. Then he started on the second print job and worked (he stopped because I only had one page, but took over when I placed the book in the same place and pushed OK.) If the problem was in fact where I place the paper I want animations would show good positioning.

  Yet once again, if anyone needs help or clarification on how I did the job please answer.

• Photosmart c4795 will pick up paper from tray

  My photosmart c4795 won't not pick up paper from the bin - keeps giving me paper message even if there is paper in the tray.  I already ran clean paper from the utility and nothing has changed.

  Help please!  He has been feeding paper last night!

  I ended up hitting the front of the printer and now it works! For plain paper - I am trying to print business cards now and it feeds late

• Not compatible ink cartridges for HP Photosmart C4795

  I just bought new cartridges for my HP Photosmart C4795 and replaced the 'old' as I did several tims and got this error message. All HP printers, I have owned that it is the first time I got it.

  I found the video on the site to explain how to clean the printer but nothing has worked. If I put the old cartridges back in, I don't get the message, but they are empty and does not "make me a lot of good.

  So what's the problem? Why don't I get the message for the old cartridges but I do it for the new.

  Are there more cleaning who needs.

  Very frustrating,.

  Any help will be appreciated.

  Greg

  One of the cartridges seems to be defective.  You can find who is at fault by putting the old cartridges in the printer, then install the new one at a time to find cartridges that is causing the error.

  Once you have found the faulty cartrdige I would say giving cartrdige UNPLUGGED plus one contacts only, if that does not solve the problem, and then return the replacement cartridge.

• HP Photosmart C4795: Hpqdirec is not compatible (Windows 10)

  Recently, I upgraded to Windows 7-64 bit for Windows 10.  Even after the upgrade to Windows 10, my HP Solution Center program has worked well.  Then for some reason (possibly after a Windows 10 update) program is now failing open.  To trouble shoot myself, I uninstalled Hpqdirec and reinstalled again on the HP site, but the problem persists.  Then, I clicked on the HP Solution Center icon and "Troubleshoot compatibility". He came up with the message: "Hpqdirec is incompatible."  My printer is a HP Photosmart C4795. Can you help me?

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Photosmart c4795 FAIL wireless

  Try to install the Photosmart c4795 on my wireless network. The problem seems to be with the software that came with the printer. The computer I use a Vista Home Basic. It uses avast! and windows firewall. I disabled them both, and that didn't make a difference. Here's what's happening.

  After the initial Setup starts, I get to the screen where I choose "USB Câble" or 802.11 option. When I choose wireless, the next screen tells me that it cannot find any network (SSID). Although I am currently connected to it, it broadcasts its ssid and he even appears on the printers "HP Network Configuration Page" it seems so that the printer can see the network, but can't the software on my computer. So I try to do a manual config, type in the ssid and click Next. After I choose infrastructure mode, I get an error message "the selected printer is not present.  If it please to connect you to the printer and press Retry or Cancel to select another. Note that the printer is installed, and I am able to print to it while the usb is connected.

  After the closure of the programmes and come back to it, I have to change the ports usb or goto the Device Manager and uninstall to try again (I have to use auto detection) if I check the box "the printer is already connected via usb" it brings me to a page with a list of printers. There is only 1 in the list. It's good, but when I pick it and next time I get the same error "printer selected is not present.

  Pls help.

  I used the cd and never had problems, so I don't think it was a bad copy.

  and boo lured3nem! That's what I've been doing all this time... Thanks for the help.

  Anyway, so it turns out that my initial assumption must have been correct. Something on this vista Home Basic machine did not allow hp to wireless access card software and/or the windows wireless api. I brought on a laptop with windows7 on it, and after a warning on windows7, I went the installation. Everything is going as expected... even without disabling my firewall or Panda antivirus. Once I got the printer on the network, I have re-installed on vista basic machine and selected that it was already connected to the network, and the software found it. YES!

  Note: I'm fairly advanced with computers and I couldn't find anything on this computer and would be interfearing... No service, no program running... nothing... So I'm still at a loss to know what was the cause of my problems. The best estimate is that Microsoft Windows Vista Home Basic was the problem... as it seems to be so often.

  If all else fails in your printer (especially with a vista machine) wireless configuration, try to borrow a laptop and get it on the network in this way... Once its on the network even the dumbest of the computers must be able to find it.

  Thank you to everyone!

• OfficeJet Pro 8620: Officejet Pro 8620 - after software download on 4 March 2016 printer fails to detect the paper in the tray

  Hi, I downloaded and installed the latest version of the software on March 4, 2016. But after the installation of the software can not print as printer detects no paper and poster-error "on paper" message even if the paper tray is enough. The printer was working fine before the upgrade of the software. The printer is only 2 months old.

  Hi @Al2016,

  First of all, welcome on the HP Forums, as you know it is a big thank you to get help from community members! To ensure that the paper error output is not hardware related, please make a copy and let me know if it works. A successful copy determines that the problem is actually related to the software. If you can not copy, it's a hardware problem and we will focus on the material.

  If you determine that the problem is hardware related, please use the following to fix the problem: a Message displays "paper" and does not Pick Up paper from the printer. "

  In the unlikely event that you can copy do not print, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

  The installation screen and the software opens and you can click on connect a new printer.

  Please let me know the results of your efforts and I will get back to you. If one of the suggestions I did resolve the problem, please click Accept as Solution button below so that others may see that your problem is solved! Thank you.

• Photosmart C4795 on fall back on the deployment of Airprint for 2011 schedule?

  Hello:

  I recently bought the printer Photosmart C4795 wireless in September or October 2010. It is not on the deployment schedule of Airprint for 2010 on the PDF on HP support.

  Would you know if The Photosmart C4795 wireless printer will be on a schedule of deployment of Airprint for 2011 or internal parts rely before the deadline of compatibility?

  I want to upgrade this printer to be Airprint compatible.

  Thank you!

  Ziffel

  One of the main requirements for Airprint is the must have ePrint printer.  I do not see the C4795 on ePrint models list, so it will not work with Airprint.

  Another solution is HP iPrint, it allows to print Apple portable devices via a 802.11 wireless connection.

  Here is a link to a document iPrint, it will show you how to get HP iPrint.

  http://support.HP.com/us-en/document/c01616126

• HP Photosmart C4795 did everything BUT copy

  HP Photosmart C4795 - less than 2 months old - worked fine 2 days ago.  Nothing has been installed or changed my mobile during this period.

  Analysis PC - work

  Prints from PC - work (color, p.c.)

  Copy - does not work

  I hit "Copy" on the touch screen

  Then "black copy" or "Color Copy" (any - same result) on touch screen

  And then 'OK '.

  He doesn't it beep at me.  It does not even attempt to copy - is not analyze the element or anything - just does NOTHING.

  The touchscreen works perfectly for the scan to PC - but for copy - it goes through all the steps - and then does NOTHING - just beeps when I hit 'OK '.

  He has worked 2 days - nothing has changed in my network or the laptop.

  I have done a full power cycle - router, computer laptop and printer - 30 minutes off - then turn it back on.  Nothing.

  I reinstalled the driver - NOTHING.

  It comes a day - less than 2 months - decided to do nothing when I hit OK to copy.

  Anyone have any ideas?

  Best Buy told me to ' drop for 2 weeks or more "-I hope I can find a better solution here.

  Thank you.

  Yes - I finally reached someone at HP who knew what they were talking about.  It took 3 cats online different - with different people (I guess).

  Bottom left of the user interface of the printer itself (side) - you see nothing - but there is something there.  Hit this task 4 times (I don't do this to the top) - or keep hitting until it registers 4 times.  It will then go into a factory reset mode.  You will see the words say you this.  You will then have to ride in the original game - choose the language, blah blah blah.

  Then you will need to put your installation disk in your laptop and reconfigure - this isn't a complete reinstallation - there is an option called "reconfigure" or "update configuration" or something like that (I don't remember exactly).

  So, it's a pain - but it worked.

  But the trick is that lower right corner of the user interface of the printer - next to the word 'copy' - it is blank - but if you keep pressing it - at least 4 times - he's going to do a factory reset.

  Basically, it's almost want to do all the steps again (including the wifi connection reset) you did when you took everything first out of the box.

  Let me know if you need additional information.  Someone at HP told me that - through the online chat.  So, if my indications confused - if you go to HP to chat and ask questions about a 'factory reset' - that could get them in the right direction for you.

• Why my Photosmart C8180 can not see my Virgin super hub, when he sees all the other distant routers?

  I'm on Mac OS x 10.7.2. I have a blank superhub. My Photosmart C8180 will not detect the hub using the wireless Assistant, but sees other networks in the region. I tried setting that allows a fixed IP address in the range of the router. Still nothing.

  Pilots etc have been updated for Lion ffollowing as instructions on the HP site but still no luck. Can anyone help?

  Diagnostic summary reports: -.

  Radio on: PASS

  The radio work: PASS

  Cable not connected: PASS

  Network name (SSID), found; IN CASE OF FAILURE

  The six remaining diagnostic report does NOT RUN

  Record of the summary reports: -.

  Network name: NOT APPLICABLE

  Hardware address (MAC): {identified but not included here}

  IP address: NOT APPLICABLE

  Configuration source: NOT APPLICABLE

  Communication mode: INFRASTRUCTURE

  Authentication type: NOT APPLICABLE

  Encryption: NOT APPLICABLE

  The blue light above 802.11 g on the right face is on.

  The printer works properly when connected by USB, but not with the radio.

  Kind regards

  Michael

  Security mode is set to [AES] WPA2-PSK and SSID Broadcast is checked.

  ID of 5 GHz Wireless band setting

  I tried to change to auto WPA, but it has no effect. Still does not see my router.

  Printer is set up for sharing in the Mac system preferences

  Just found my own solution.

  Changed Wireless 2.4 GHz band and has appeared.

  Thank you for taking the time to answer anyway. One to save for the future, if someone else reports similar problems with blank superhub.

  Kind regards

  Mike

• Photosmart C4795: Center of solutions of downloaded need Photosmart C4795

  Recently, I experienced a problem of dll when printing on my Photosmart C4795 printer.

  I have provided an extremely lengthy and detailed the problem correction, and after following all the steps, he succeeded!  Great!  Here's the bad news: I have the center of Solution and not really needed!

  Help, please!  Thank you!

  Hello

  Please download and reinstall the following software:

  http://ftp.HP.com/pub/softlib/software12/COL28119/MP-71555-4/PS_AIO_06_C4700_USW_Full_Win_WW_140_175-4.exe

  Kind regards.

• HP Photosmart C6380 does not print the entire page

  My HP Photosmart C6380 will not print whole pages.  Some lines close to the end of the page are not printed.  From time to time, it prints the whole page.

  Hi mercierm,

  Welcome to the HP forums!

  I see that you are working with a Photosmart C6380 and sometimes it seems not to print the whole page and other times he does it. I'd love to help you find a solution to this problem

  To start, you are able to print an extended self-assessment report and it came out completely, or if you make a copy of a complete page, never there issues? This will contribute essentially to determine if it is the hardware or software, but since it seems to be sporadic we are not able to limit too much more. You can also try the steps of cleaning in this document "on paper" Error Message and the printer is not Pick Up or paper feed .

  Let me know how it goes for you!

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• HP Photosmart C4795 to print no

  I have a HP Photosmart C4795.  I tried to print something today, and sends it to the printer.  The printer acts like he feels but it spits out a blank sheet of paper.  The ink cartridges are filled.  It prints a test page. Any ideas?

  Hello

  See if this document helps you:

  Printing blank sheets

  Click on the + sign by your operating system and follow the steps in order.

• HPZIDR12.dll error message on printer Photosmart C4795

  Try to print on my HP Photosmart C4795 printer.  After turning on the printer, I get an error HPZIDR12.dll.  I'm finally able to print, but the dialog box continues to display.

  Hi AggsterD,

  Sorry, that does not solve the problem.

  Follow these steps to see if we can solve this problem:

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%.

  • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  • Download the software and choose to save money, save it on the desktop.

  HP Photosmart C4795 printer all-in-one drivers.  Select your printer from the list.

  • After downloading software and extracts, open the temp folder again.
  • Starting with 7z folder (example: 7zS2356)
  • The util folder.
  • The CCC folder.
  • If you have an HP computer, run the L3uninstall.exe. If you have ano HP computer , run the L4uninstall.exe
  • Once the uninstall is complete, reboot the computer.

  Follow these steps to reset the registry settings and options for Windows Installer.

  Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run.

  In the Open box, type msiexec / unregister, and then click OK.

  Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run.

  In the Open box, type msiexec/regserver, and then click OK.

  Run the tool of Accessories\ system disk cleanup. Delete files using Disk Cleanup.

  Download and install the latest version of Adobe flash player. Adobe Flash Player Support Center.

  Restart the computer.

  Download and run the HP printer install wizard for Windows. Find and fix common printer problems using the tools of diagnosis HP for Windows.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the results.

  Thank you.