HP photosmart c5100 nohp device detected

Similar Questions

• HP C6180 AIO - HP - no. devices detected Solution Center

  Recently had to reset my modem network and DSL router.  Before this reset my printers were HP Photosmart 6100 series and HP Photosmart 6100 Series Fax. The HP Solution Center will begin to initialize the top and view the status of the printer etc.. After the "reset" it has only the HP Photosmart 6100 series, No Fax. When I start the HP Solution Center, the message "no HP devices detected" appears followed by the closing of the transaction.

  I went through the process of removing all of the HP software, HP Essential and HP Essential 3.5 and associated with the printer and reinstalled drivers ALL in one software. The HP Solution Center has worked, but stop working after you stop and restart.

  I have an HP computer running Windows Vista System 32.

  Any Suggestions?

  Solved

  After a month of frustration, I found an answer to my problem.

  I found a disc that I downloaded from HP for a dated driver AIO labeled "AIO_CDA_FULL_NETWORK_enu" VER4.42.0.0 dated 25/10/2007 file, 159 MB. I had used this file earlier when I had a similar problem with the printer and Windows XP. I loaded the file, and the hp Solution Center recognizes the printer. FAX and scan modes work fine.

  I don't know what that answer key, but now the printer works properly.

• No audio device detected

  I bought my second hand laptop, and there is no sound.

  When I go to my iTunes or media player a window pops up saying there is no audio device detected. I'm not very smart computer so if you can help me at all with this please post you anser in terms of can

  Thank you

  Hi rommyd,

  And what laptop you have exactly?

  Have you installed the latest driver from the official site of Toshiba?

• Series of HP Photosmart C5100: only half of the print page

  Original page version:

  

  my printer of the page version:

  

  How can I solve this problem?

  Hey @OMGEngi,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you have some problems with the all-in-one Photosmart C5100 printer do not print in the right place on the page. I can help with that.

  First of all, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to solve problems of choice with the printer. This document describes a slightly different issue from what you describe, but it provides the same troubleshooting steps.

  If after completing the document, you still experience this problem then the printer must be replaced. You can contact HP support by clicking here and filling out the form below.

  I hope this helps and I hope you have a great week!

  If this resolve that your problem then please let others know by clicking on accept as Solution below my post.

  If you want to let others know that you will appreciate my help then please click on thumbs to the top of the icon on my post.

• Logitech c310 incompatible device detected when using Skype

  Original title: logitech c310 windows does not detect the device

  I bought the new c310, detected device and the software loaded everything worked for about four days, tried to Skype but incompatible device detected, notlisted in any location of the hardware store, uninstalled/reinstalled, taken in camera, incompatible device.  Logitech software is fine - that happened on 4 previous cameras also on my computer laptop and pc

  Hi Bigstuman,

  1. This only happens with Skype?

  You can consult the following links to Logitech support and check if it helps:

  http://forums.Logitech.com/T5/video-chat-applications-non/all-posters-how-to-make-your-Logitech-camera-work-in-an-IM/m-p/46373

  http://forums.Logitech.com/T5/video-chat-applications-non/QuickCam-not-working-with-Skype/m-p/29645

  If the problem only occurs with Skype, you can consult the following the support of the Skype forum link and post your query:

  http://Forum.Skype.com/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No Audio device detected received after upgrade to Vista message

  NO AUDIO DEVICE NOT DETECTED - UPGRADE WINDOWS XP TO WINDOWS VISTA ULTIMATE

  Recently, I switched from Windows XP to Windows Vista Ultimate, and now I have no sound. No audio output device detected. I tried the driver far from Device Manager, still nothing. Driver not installed, rebooted and no change. I was told I need a bus class driver Universal Audio Architecture (UAA) High Definition Audio of Microsoft, but all I can find are those for Windows 7 and XP. What can I do to fix this

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  If Vista Sound Drivers for your Audio hardware are not written, cannot do anything about it.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.

• No device detected wireless network

  I installed Win 7 NSB my HP Pavilian dv8 and I get "no device detected wireless network" when I try to connect to the internet.

  Whaat shuold do?

  Hello:

  Please first install the chipset driver and restart:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76994-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  Then for the devices you listed:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-87682-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75391-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-92370-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1&cc=us&DLC=en&LC=en

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75414-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  Paul

• HP Photosmart C5180 - Windows 7 64 bit - network - device detected but FAIL to install.

  Hello

  I have a Photosmart C5180, connected with an ethernet (not usb) cable.

  It's great to work with all the computers in the House (vista and xp).

  But my new computer, a 64-bit windows operating system 7, impossible to install the drivers:

  The drivers are now installed, but the step 'add a device' does not work correctly.

  After the analysis of network, the printer is displayed:

  

  Then I click Next, to "network analysis":

  

  OK, next step is "installation." Before the picture, it says 'detected printer"(french).

  

  And a few seconds after it fails:

  

  Grrrr wtf?

  Thanks for the help!

  I had problems to install the HP software. When I installed the full package I get pop ups and error messages. So I did a complete reinstall (I have now if he really had to do I had other issues). After that I just installed the drivers and no extras and it works very well. I'm also hooked using the ethernet connection. A point even before the reinstall if I come you drivers and no additional software. I can still scan using Windows Fax and Scan. I probably will not add extra software until there is another version.

• HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

  Hello

  I installed Mac OS sierra

  Since then, my HP Photosmart C7280 scanner is not longer detected:

  • In the system preferences tab scan
  • Image transfer can not find any device

  I reinstalled the device

  Print shops

  Scanner is connected to the router (Hello) by Eternet

  Scanner still works when you use a Windows 10

  MacBook Pro (retina, 13 inches, end 2012)

  macOS Sierra Version 10.12 (French)

  Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

  Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

  What OS did you go to?

• Firefox 9 wants to disable my Logitech devices detection plug-in. Anyone who works on this issue?

  My attempt recent upgrade to v9 gave rise to Firefox want to disable my add Logitech we for "device of Detection." If I was going to come, I guess that my mouse would be disabled? Do you know if anyone is working on this issue?

  Thank you.

  Ask Logitech about it. Developers Add - you are responsible for keeping their stuff to date with Firefox.

• No audio device detected Qosmio X 500

  Hello
  I'm new on this forgiving so if I make a mistake. I have some problems with my Qosmio X 500. Recently, there is a red cross next to the speaker in my taskbar. Whem hovering the mouse over it, it says no speakers or headphones connected.

  When right click on detection of problems, it is said that no audio device is connected. In my windows Device Manager it says that everything is connected OK I also downloaded the latest Audio drivers (conexant). Uninstalled the 'old', restart the computer and installed the new. No solution.

  I found on the internet, it is one common problem with other laptops Toshiba, but no solutions have been proposed.

  Help, please.
  Another thing I noticed is that video streamin (Youtube, for example) is suddenly very slow and laggy. Play reviews are no problem.

  Hello

  I put t think that your speakers are silent because in this case the crossed red circle would be visible in the taskbar you said you see a red x so I guess there is a software problem.

  I found a tip useful and interesting to the Microsoft page:
  [On the volume of the taskbar icon shows the Red Cross. Trouble shoot bugs but keeps showing on and off. http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-sound/on-taskbar-volume-icon-shows-Red-Cross-trouble/5f3906da-4d36-44c8-8b39-9884415ce22c?msgId=d7ff90e1-b836-4b71-88de-a4d349bc2136]

  Please check that and post comments

• Problem of device detection via the RS232 port on sbRIO-9631

  Hello

  I can't detect a URG Hokuyo laser rangefinder - 04 LX connected to a sbRIO 9631 via the serial rs232 port. I can confirm that the rangefinder works through the computer and that it is detected by MAX and VISA when it is connected through the serial port on my computer. I have the following software downloaded on the map:

  LabVIEW time real 9.0

  Language support for LabVIEW RT 1.0.0.3

  Engine network Variable 1.6.0

  NOR-RIO 3.2.1

  NI-VISA 4.5.1

  NI-VISA Server 4.5.1

  Customer variable for LabVIEW RT 1.6.0 support

  NEITHER Max, I see under "Devices and Interfaces" in the configuration tree is the RIO0.

  TIA

  Hi oswong,

  If you install "OR Serial RT" on your sbRIO-9631, then it will allow support for the RS232 port integrated on your Single-Board RIO.

  Kind regards

• Photosmart C4280: Incompatible device

  Hello.

  My Photosmart C4280 was previously works very well with Windows 10.  A new update has been installed a couple of days.   Now it is said that the Photosmart is an "Incompatible device" and will not open it.   I tried to reinstall the program three times to no evail.

  On the last seconds of the installation, an error message comes up saying the device is not compatible with the pc and the program could be harmful.

  Anyone have any ideas?

  Hello

  Thank you for using the forum.

  We suggest that you download the printing software win 10 full functionality of this link;

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4200-all-in-one-printer-series/3192751/model/3192752#Z7_3054ICK0K8UDA0AQC11TA930O2

  If it's already done, could you try to uninstall previous drivers before reinstalling the downloaded one?

  Hope that helps.

  Happy New Year 2016!

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Unknown device detected during the insertion of the SD card on a Dell computer.

  Original title: ACKNOWLEGMENT of CARD MEMORY

  IS THERE A FILE THAT SHOWS MEMORY CARDS. I HAVE BEEN USING 2 DIFFERENT MEMORY CARDS FROM SANDISK FOR A WORK OF PHOTO NIKON D 7000. RECENTLY, I RECEIVED A PROMPT THAT A STRANGER (MEMORY CARD) DEVICE HAD BEEN DETECTED AND NOW WINDOWS DOWNLOAD TO TAKE PICTURES WILL NOT ACKNOWLEDGE RECEIPT OF SANDISK CARDS. I CAN STILL DOWN LOAD DIRECTLY FROM THE CAMERA THROUGH A USB CABLE. WHEN I TRY TO INSERT A MEMORY CARD DIRECTLY INTO MY DELL DOES NOT EVEN APPEAR.

  O / S: VISTA VERSION 6.0 SERVICE PACK 2
  Br: VERSION 9.0.810.16421IC UPDATE VERSION 9.0.2 KB2559049

  Hi Willy,.

  You can try these steps and see if it helps.

  Step 1:

  You can try reinstalling the SD card and see if it helps.

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the device name in the list of Bus USB controllers.

  c. If you see the item on to the SD card, right-click on it and click on uninstall.

  d. restart the computer and check if that helps.

  Step 2:

  You can also format the SD card and see if it helps.

  You can make a backup of the data and format the SD card.

  For more information on the 'formatting of disks and readers' visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.