HP C6180 AIO - HP - no. devices detected Solution Center

Similar Questions

• Installation of device HP Solution Center is not complete

  I have a PhotoSmart C7280 all-in-one printer works as a printer in Ethernet network.  My PC is a HP Pavilion Slimline s5280t running Windows 7 Pro 64 bit.  I had the printer for longer that I had the Pavilion.  I use HP Solution Center at least once a month to copy documents in PDF format for a job that I have.  Yesterday, I tried to use it and got the error "device is not complete.  Uninstall and reinstall HP Solution Center did not work.  I did some research on the forums and found the discussion of «records starting with 7Z.»

  I ran the Uninstall_L3.bat last night. He uninstalled everything.  I then downloaded the drivers on the HP site, once again. When I ran the installation, it failed because "a file is missing.  He has not said what file.  He created a 'solution' for me, basically going through all the steps to make sure that the printer and the router are working (they are) and the printer was on the network (IE).  I then downloaded the drivers AGAIN and again ONCE had a "missing file" error on installation.  And my printer has been uninstalled.  And I have a NEW suggestion from HP that I should reinstall after turning off all my startup tasks and reboot.

  If the driver package for the C7280 is defective and right now I'd bet money that it's telling me to turn off my startup list, which has not changed in the month, will not help.  Because my printer is no longer under warranty (hey, my PC is out of warranty), I don't expect any help from HP.  I hope that some other users will be able to offer something that will work. I'm about to go back on the CD supplied with the printer and install from that.  Help?

  Sorry, you had a difficult time getting the solution center to work.  You have certainly done all the basic steps and advanced to make this work.  I always keep a forum post stored on my computer that supports troubleshooting the solution at a different level of the Art Center.

  -HP - SOLUTION Solution Center installation problems! --

  I recommend reading this post to review the comments and see how to play the stages and how some problems are exposed.  Certainly, it treats missing files that you referenced.

  I usually just scan using paint or Windows Fax and Scan as soon as I can print as it is just a little more easy to work in the registry of a HP computer.  So please be careful if you choose to go in the registry.

  First thing first, I recommend you to create a different user account in the control panel with the admin rights, then by running the installation disk in the second user account before you attempt anything in the post on the forum above.  This will eliminate any conflict from previous attempts on the main user account.

  I really hope it works for you!  Let me know error messages that you get when installing with the disc.

• HP 6310 PRINTER: SOLUTIONS CENTER HP

  WHEN THE HP SOLUTIONS CENTER IS ORDERED TO OPEN, A WINDOW POPS UP SAYING: "NO HP DEVICES HAVE BEEN DETECTED - SOLUTION CENTER WILL BE CLOSED. THE PRINTER WORKS PROPERLY. I'M PRINTING FROM THE DESKTOP DIRECTLY AND WIRELESS FOR MY LAPTOP. WITHOUT THE WORK OF THE SOLUTION CENTER, I CAN'T SCAN PHOTOS OR DOCUMENTS.  THE FUNCTION OF HP SOLUTIONS CENTRE HAS ALWAYS WORKED IN THE PAST. I UNINSTALLED AND REINSTALLED THE FUNCTION WITH THE ORIGINAL CD.

  Hi @19JLC70,.

  Welcome to the HP Forums!

  I see that the HP Solution Center is saying, "No. HP device detected," on a Windows Vista-based computer. I'm happy to help with this problem!

  I suggest the following:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows Vista).
  • Reinstall using HP Officejet and Photosmart full feature software and drivers.

  If these steps do not resolve your problem, please consult this guide to scanning, how How to Scan: Windows Vista. Select how to scan without HP software and you'll see a few other methods of analysis without the HP Solution Center!

  Hope this information is useful and thanks for posting!

• HP Solution Center: HP Solution Center has stopped working

  I have a HP Officejet 4500 all in one printer, copier, scanner, fax machine.  When I first added the printer to my HP touch computer, everything was fine.  After that I have upgraded to Windows 10, things are complicated.  I used the HP Solution Center software for my scanner.  It worked yesterday, but does not work today.  I uninstalled the software and reinstalled, but now the scanner part does not appear in my devices and Solution Center still does not work.  I can scan from the buttons on the front of the machine, but I don't get the opportunity to change it before the scan is saved.  More embarrassing, and I hope that I don't have to buy a printer that is compatible Windows 10.  No simple solution out there?  I saw some other suggestions for similar problems, and they require a list of steps that I'm not comfortable trying on my own.

  Found the solution.  See that the other thread on this forum titled "Center of Solution does not work since the upgrade to Windows 10.  You should go to Windows Update and uninstall the security update 29/12/15, Microsoft pushed the 29/12.  Solution Center and then charge again.

• No HP devices have been detected. HP Solution Center will close now. HP 5610xi all-in-One

  I followed all the instructions without result.  I uninstalled the printer using Uninstall_L3.bat, reinstalled the printer using the download from the HP Web site.  The installation ends.  It goes through all the movements to the end where is is located at 96% for the longest and fairer farm.  Never, he finished the installation and so no HP devices.  I can scan using paint I can print documents.  The solution center is the only part not working do not and I need to be able to use the auto feed for scanning.  I can't scan using the buttons on the printer.

  What can I do now?  I am running Vista Home Preimiun, Service Pack 2 on an HP Pavilion Notebook dv9417cl.  It's frustrating.

  Well, there are ghosts or gremlins in the printer or the pc, or both.  I had worked on my PC earlier, put on standby for a coffee and when I woke up, it appeared a message for the installation of HP.  I clicked on continue and it has finished installing and everything works.  I am at a total loss about why, but I'm glad it works.  Thank you, Kyle.  Cherry

• No HP devices have been detected. Solution Center will close now

  After you have reinstalled the software C3140 on my PC, I get the error of the message object. I am running Vista Home Basic on Dell E520.

  I uninstalled two three times. Completely cleaned all HP form the PC and reinstalled. Everything seems to load as Solution Center. When I try to open the centre Soluution I get subject error message.

  Grunt

  Hi PK,.

  Thank you for the update. We are always here to help the customer. Have a wonderful day.

• HP OFFICEJET 6313 AIO WIN 7 REQUIRES RUN HP SOLUTION CENTER

  Hello

  I have a HP OFFICEEJET AIO 6313 installed with Win XP Prof 32 bit.

  Now, I have formatted the PC and installed Win 7 32 bit Prof.

  Now when I try to install CD for 6313, says it is not compatible,

  And I connected the direct USB connection so it automatically detected drivers for AIO 6313.

  Now the printers and scanners appear in windows, but I need to use the PRINTER with the HP Solution Center as I used it with Win XP.

  Can I download HP Solution Center of all links and get the AIO added... or other solutions?

  Hopes for a quick response with the best solution for work please...

  Thanks & best regards,

  Shan-

  Hello

  Please download "Full Feature software and driver" from the following link and install it on your Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1119599

  I hope this helps.

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• No audio device detected

  I bought my second hand laptop, and there is no sound.

  When I go to my iTunes or media player a window pops up saying there is no audio device detected. I'm not very smart computer so if you can help me at all with this please post you anser in terms of can

  Thank you

  Hi rommyd,

  And what laptop you have exactly?

  Have you installed the latest driver from the official site of Toshiba?

• C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]

  Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.

  Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].

  If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.

  I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe

  Thank you

  hasksm

  Hi there hanksm,

  I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.

  Please see JasonBlake7 post: scanning error

  Please let me know how it goes and if you need help!

  Thank you

• HP Photosmart B110: HP Solution Center cannot run because your device installation is not complete

  Since the recent 10 upgrade Windows HP Solution Center no longer works.  After the initial Welcome screen, it says "HP Solution Center cannot work because your device installation is not complete."

  The following tips on previous discussions and the support centre, I tried uninstalling and reinstalling several times printing software.  I ' v has also ensured that adobe Reader DC is up-to-date.

  Printing and scanning are fine from other programs.

  Any ideas?

  Hello

  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  Download the software COMPLETE features here.

  Let us know if it works!

• "Solution Center cannot work because your device installation is not complete."

  I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete."  Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

  1. download and install the following update

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

  2. type % temp % in the field of race

  3. Locate and open the folder starting with 7z (example: 7zS2356)

  4 open the Util folder

  5 open the CCC folder

  ...

  ...

  .. but is there a "Util" folder in the folder starting with 7z...

  I don't have a disk, rather downloaded the software.

  It sucks, any other suggestions...?

  I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

  Thanks in advance for any help!

  I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

  10. run the download to reinstall the printer

  So I'm pumped it worked, but why is this problem even occurs?

• OfficeJet 6500 Wireless: Win 10 - Solution Center - scan not performed as another program using the imaging device

  I upgraded to 10 Windows on a laptop ASUS, then updated the software for a HP Officejet 6500 E709n Series printer HP solutions Center.

  I can print successfully to the printer but when I open the solution Center and then try to scan an image or a Document, I get the following error "Scan cannot be performed because another program or computer using the networked imaging device.

  Extended error information is 8, [(0.18,-2147467259)]

  When I look in device under imaging devices Manager, two devices are displayed ASUS USB2.0 WebCam (1) and (2) Officejet 6500 E709n.

  It would be much appreciated if someone could help me solve this problem.

  Hi midnight-anwrs,.

  Thanks for getting back to me.

  I looked into your link "Printer problems after upgrade to Windows 10" and 6 "Scan with a scanning application" stage, I found the solution.

  I downloaded the "HP Scan and capture App" and can now easily scan photos and documents.

  Thanks for your help.

  Much appreciated,

  KenRabs

• OJ4680 AIO: HP solutions Center does not launch

  I have been using HP Solution Center 14.0 for many years and now many months on Windows 10.  I mainly use it to scan documents.  The application has stopped to launch, even if I don't hear a "ding" when I start it.  Howevert I have absolutely no display.    The only other clue I have is that I don't see an 'App' run in Manager tasks.

  I removed the printing device and reinstalled the full software download several times since yesterday, but didn't get the same results.

  I have other hanging HP printers, so there are a number of HP background running processes.

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement