HP Photosmart C8180 All-in-One: Photosmart C8180 All-in-One will not work in El Capitan

Similar Questions

• Windows will start, the screen starts flashing and then the screen say Logging Off, then restore the screen to the CTRL ALT DEL all other functions will not work.

  Start my computer, it will default to the CTRL ALT DEL screen.  After graduating in the login screen I enter the password.  Windows will start and then the screen starts flashing and the screen say Logging Off, then restore the screen to the CTRL ALT DEL I can boot into safe mode.  All other functions will not work.

  Thank you

  I guess you wanted to ask how to solve the problem. If then all in Safe Mode you can use system restore to set up Windows to a point when the problem did not exist.

• HP f2110 all-in-one will not work

  Just my laptop was restored following a nasty BSOD. Printer has worked before. Does not work now. Printer has power and works. When I click on HP digital imaging monitor I get a box saying - peripheral Hp No. have been detected. HP Solution Center will close now. I downloaded the driver online (can not find disk) still no luck. Any ideas?

  Hi Dominicjack,

  1. You are able to print using other Windows applications?
  2. You are able to print a test page?
  3. Ran the installation of the printer setup?

  I suggest you see if you can print the atest page.

  Print a test page

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

   

  If you are unable to print the test page and then download and installdriver and full features software on the HP site, check if it works.

  See also below link for more information.

  The all-in-One HP products - solve installation problems for connected USB all-in-one Windows products

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• Photosmart B109a-m printer suddenly will not print.

  My Photosmart B109a-m printer suddenly will not print. It worked last night and no connections or settings have been affected since then.  It will not print the test page and the printer Utulity advises that means a problem with the printer, not the computer.  The computer shows it sends data to the printer and indicates that it is printing but nothing happens with the printer.  Any ideas how can I fix?  I'm on an iMac with Lion.

  How is the printer connected?

  Try to reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP psc 2510 photosmart driver will not work

  I recently bought a new HP all-in-one, so I gave my old all-in-one for a friend. It's a HP psc 2510 and I'm having a problem installing the printer driver on their PC. Windows XP

  I tried to use the original CD supplied with the printer (version 3.1.1) as well as the version of the entire network and the basic version of the site hp.com (version 4.2.1). In all cases, the results are the same. The program will not work.

  In the case of the downloaded version, I see the files extract to a temporary location until 100% then nothing happens once completed. With the original CD when I run the setup.exe screen flashes and then nothing happens.

  I don't know how to solve this. I wonder if Microsoft changed something during a Windows update that affects this installation?

  I tried the version CD and downloads on 2 other PC with the same results. I even downloaded the XP on a Vista PC version to see if it would go at least after the extracted files and they do not have.

  Can someone please download the driver for this printer on their PC and let me know if it runs once it has extracted all the files? Maybe HP has a file corrupted on their site?

  Here is the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228 & lc = on & cc = us & dlc = in & sw_lang = & product = 30377...

  I solved the problem!

  Here is the solution I used: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software/gc-w01-enu-nb-exe-extracts-to-100-but-setup-fails-instantly-in/td-p/1140125

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• Brother all-in-one does not work with the computer more

  After an automatic windows/XP download started what follows:

  All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

  Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

  Measures taken so far:

  1. Uninstall and reinstall the Brother software, no help.

  2 brother support after an hour said that it is the computer not brother (I believe that good).

  3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

  4. in addition, conducted a deep scan for viruses etc, nothing found.

  Any ideas?

  You have posted to a group of Vista, but seem to be using winxp?

  What automatic download? Update history will show what has been updated

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.