HP photosmart D7460 print photo with red streaks

Similar Questions

• Example: Want 5532: print photos with red stripes through them

  I have a printer Envy 5532. If I print from an sd picture card print ok, copy a photo directly from the scanner prints perfectly, but if I print photos already stored on my computer they thin red lines randomly through them.

  Hello

  Thank you for your response. Now, I found that my problem was actually confused by a number of coincidences.

  I install the printer and run test print page & copied from the scanner and printing from an sd card until the problem of the "band" appeared. When I tried to print from a photo already stored on the computer, it was when he showed first really upward. I ran the Print Tool of doctor and no problems have been reported. Similarly, the printed test page seemed ok even though of course only small colored sections there. Finally, after running test after test, the ink ran out and I had to put in a new cartridge - Eureka! problem disappeared.

  I find, therefore, that I had a faulty cartridge that was causing the problem. I have since run a photo on the 'best quality' on Photo paper and it looks perfect. The high price of the cartridges, it was a costly exercise, but at least I'm now able to print my photos which is what I bought it for.

  Lagartija.

• HP Photosmart D7460: print system failure "0Xc18a0106" (HP Photosmart D7460)

  < it="" is="" a="" photosmart="" printer,="" not="" inkjet,="" but="" i="" could="" not="" find="" a="" perfect="" board="">>

  Anyone know how to do a MASTER RESET on a HP Photosmart D7460?

  Please do not send me links that list the steps to follow for a different model. He probably wouldn't have the same buttons.

  I just spent $ 60 + ink cartridges, but it does not solve the problem.

  I tried to unplug the printer while on, unplug the USB cable, then reconnect everything put back again, nothing works.

  HP can't do this no more, and I was told to post here on the Forum.

  Thank you!!

  Jabzi, thank you very much for your quick response.

  I need aplogize because I incorrectly titled as 'Print System Failure ' message instead of the correct "ink " system failure

  Here are the steps that erased my error and rendering my D7460 work also.

  The error is displayed on the screen, do the following:

  (1) press on & press and hold simultaneously the buttons print Photos and red eye removal, and then release both buttons.

  (the display should say "Enter spécial key combo")

  (2) press on & release the following buttons in sequence:

  -Red eye removal

  -Print Photo

  -Red eye removal

  (the display should now show a key code (do not act; you won't need - mine was PRXXFN0723AR).)

  (3) tap (on screen) the as many times as necessary to get the message across, right arrow icon

  "Menu of the System Configuration.

  (4) press on & release the OK button.

  On the title banner, you should see the letters "FACTOR" and the "hardware failure status" is displayed.

  (5) press on & release the OK button.

  Now it should display the message "disabled hardware failure status. Press Cancel to continue.

  (6) press on & release the Cancel button as many times as necessary to get one of these two messages:

  'Welcome to Photosmart Express' or 'Ink system failure' (with the error code 00XX0000)

  (7) turn off the printer using the power button.

  (8) unplug the power cord at the same time, the rear of the printer and the wall outlet.

  (9) wait 30 seconds (really, wait too long)

  Chart 10) power cord in the wall FIRST, and then at the back of the printer.

  (11) turn on printer using the power button / stop.

  NOTE: If the screen displays the message "printer preparation occurring", DO NOT interrupt it.

  You can tap on tools (key) and clean the cartridges, align printer or whatever it is you want to do.

  I hope this is the right solution for all who have this error!

• How to print the full path when you print photos with CS6?

  How to print the full path on the photo when printing photos with CS6?

  Hello

  You will need to use a Script to print the name of the file in Photoshop Cs6

  Something like Add file name as text layer "Julieanne Kost's Blog of »

  Concerning

  Assani

• Photosmart 6520e: print photos from the photo tray

  HP Photosmart 6520e - when I try to print photos from the tray photo here is what is happening. I empty the 8 1/2 X 11 (big) paper tray pull the photo tray properly load 4 X 6 photo paper and close the guides for focus media. Push the tray (s). When I try to print, I get the message that it is paper. EVERY TIME!

  If I load photo paper in the paper tray size, Center it with the guides and close the bins it will now display the peak (s). But it won't print from the photo tray, said always with paper. Prints only from the main paper tray. What's wrong?

  Thank you

  Hello @barnstormer37,

  I would like to help you today with the message 'in paper' that you get on your Photosmart HP 6520 e-all-in-one printer when trying to print photos from your Windows Vista computer to the photo tray. I understand that you are able to print from the main tray end, and you load properly all of your photo paper in the photo tray. At this point, it does not sound like a configuration problem on the computer. You usually have to "say" what paper tray it will be the power to the printer through your print dialog box. If the tray is always set to the main desktop tray when you want to print from the photo tray this will result in a "paper" message like your printer "think" it is supposed to print from your main tray empty. Please follow the steps below to make sure everything is set as it is supposed to be.

  For your reference I'll start providing you with the "loading paper" documentation for your product. This documentation is also useful if you decide to print envelopes as well.

  Loading paper and envelopes for HP Deskjet Ink Advantage 6520 6520 Photosmart e-All-in-One Printer Series

  Once your photo paper is loaded, I'll make you do a test print to your printer from the photo tray. Because each program is slightly different when it comes to printing, I'll start by providing you with the steps to print correctly in the Windows Photo Gallery program as it is specific to photo printing.

  1. Windows Photo Gallery by clicking the Start button
  2. Click on all programs
  3. Select Windows Photo Gallery
  4. When Windows Photo Gallery opens, choose the image you want to print
  5. On the toolbar click print, and then click print again
  6. In the print pictures dialog box, select the printer, paper size, print quality, print system, and number of copies to print.
  7. Click on the Options at the bottom right for additional print options. Ensure that the paper tray is set to the Photo tray.

  Once the adjustment options and the plateau have been confirmed as being correct, please try to print.

  Please let me know if the steps I have provided resolve your printing problem. Should receive you 'in paper' messages in another program, please let me know which program you are printing from. Good luck!

• Print photos too red

  I am running Windows XP. I've tried everything. Photo cartridge shows that it is not empty. Tried to reinstall the software, update drivers, different papers, disconnect, restart, heads of cleaning cartridge, realign and various settings of the printer. It prints too much red when I choose grayscale. Help, please!

  Linda, if you follow these steps, then you're already ensure the longevity of your cartridges. HP cartridges have a duration of 1 to 2 years. However, if your cartridge is really expired, HP cannot guarantee the integrity of the printout made with these cartridges.

  Why the instructions regarding the removal and replacement of cartridges expired is crucial is because expired ink can damage your entire ink system and cause permanent damage to the printer.

  My recommendation would be to replace the cartridges expired with genuine HP cartridges, not completed as soon as possible.

  I hope this helps!

• HP Photosmart D5160 prints everything in red only

  My Photosmart D5160 started printing everything in red. In any document (usually, we print our business letters in black only) red.

  The standard Test page printed from the PROPERTIES tab is completely red, although the Windows logo in the upper right shows a hint of pink and yellow.

  What happened when the cartridges, color and black (genuine HP 344 and 337 respectively) were half full. There is no error message on the D5160 Billboard and the LEVELS of INK display this ink in both.

  There is no configuration setting I see requiring everything to be printed in red.

  I tried a download of the latest driver from HP site... Basic installation failed half way through.

  Then I uninstalled all HP software, removed the printer and tried a reinstall of the base on the site of HP driver (I have more... lost installation CD)... It seemed to work and at the end of the process, it will automatically restart the PC. When Windows came back to the top, it says the installation failed, then he collected information about the problem, sent automatically to Microsoft to see if there is a fix for this problem. He returned and downloaded a fix for the "problem"... Unfortunately, I didn't record what was the known problem. Hotfix installation failed thus leaving me with no printer at all.

  I ran a system restore available promptly to see if I could restore to before the problem of red (I don't remember when he did) - system restore worked and I have a printer installed again, but she still print red only. Red is now counted - so I have cartridges that have a lot of ink, but as the Red runs, I can't print anything.

  Anyone has any idea what the hell is wrong?

  Thank you

  p.s. I'm under Windows XP Home V2002 SP3 with all the latest Microsoft patches up-to-date.

  Try to print a self-test of the only printer page. Maybe it's a hardware problem with the printer itself. If you print the test page and you get the same results in RED, while this isn't your software, it has something to do with your cartridge or print head.

  Even so, full to halfway, you can try to replace the cartridges and see if you get the same result. If you get the same result, it will be your print head.

• Cannot print photos with PES 9 and Mac OS x Lion on any printer. (Other applications to print very well!)

  Software: Photoshop Elements 9; iMac, Mac OS X Lion, latest version, 12 GB of RAM: I can't print to one of my three printers, HP Photosmart or laser printers.  The software recognizes all the but when I put up all print and name the printer etc, the white page just goes through the printer without printing on the Photosmart and does nothing on lasers.  I can use all printers for all applications and can print photo retouched with Picasso or other applications without problem.  I would like to re-download and reinstall the program, but it was purchased on the Apple App Store and is currently unavailable due to exit 10.  Any solution?  I wouldn't mind upgrading, but hate to spend $80 that I don't see a major différenec in version 10, and version 9 does everything very well otherwise.  Purchased version 9 August 2011 when I bought my iMac.

  Go in your username > library > Preferences and delete one of these you will find:

  com.adobe.PhotoshopElements.plist

  Adobe Photoshop Elements 9 paths

  Settings of Adobe Photoshop Elements 9

  In lion, this library is hidden. To see, in the finder, click the Go menu and hold down the option key. It appears under the small house for your user account.

  Repair permissions before trying again.

• Photosmart D7460: Printing problem

  When printing some elements such as greeting cards or business cards, my printer reproduces all part of the bottom of the print at the bottom of the card.  This does not occur when you print from Word or other programs of type, nor happens when I print photos.  Only on maps.

  Any suggestion would be appreciated!

  Hello @IreneD and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Deskjet F4180 print photos with a purple hue across

  Hi all, I was hoping that someone can help me. Our HP Deskjet F4180 is printing pictures with a purple tint (usually something in, like a coffee table or wood panelling, comes out magenta-y).

  I tried troubleshooting it myself and it seems there is no problem with the printer cartridge, or the program that I am printing.

  Here is what I tried:

  -current color cartridge replacement with a new one; problem persists

  -cleaning of the cartridge through the HP Solution Center (he asked me to clean, then intermediate clean, then first; tried all three, and the problem still persists)

  -print the photo of Microsoft Office Picture Manager and Microsoft Word

  -change the color balance (I value Magenta - 25; still did not help)

  This problem started after I printed 60 wine labels, which all had purple graphic and black text on them... but I think a lot of printing of purple would cause the printer having less purple coming out, no more...

  Any ideas what the problem may be? I have included a link below to the images show what that is the problem - the first image is how the picture should look like, the second is an analysis of the image printed super-purply (which, moreover, is printed on ordinary printer paper white old).

  http://S1044.Photobucket.com/albums/b447/cappa_j/HP%20Deskjet%20F4180%20error/

  Hi Ciara B,

  I had the intention to get back to you with some comments - thanks for your help! I tried the last steps, you suggested, except to repair, which is what I wanted to avoid .

  I found a solution to the problem though - I completely uninstalled the printer from my computer, then insta. Ed again and it works perfectly! Don't know what the problem is, but reinstall all fixed.

  Thanks again!

• Why don't G510n print photos with premium photo paper

  I just got the G510n Wireless for Christmas.  I tried to print a Photo on Photo Premium paper and she doesn't.  I can not find Photo ink for this printer.  This printer does not have the ability to print Photos on Photo paper?

  HI Dawn3905,

  Yes, your printer has the ability to print photos on photo paper.

  I do not know what operating system you are using, but here is a link that shows how to print using paper photo under Mac OS 10.5 or later.

  Also here a link to the manual of your printers with instructions on how to print photos on windows as well.

  Hope it will be useful.

• Print photos with a white background in indesign to

  I have been searching for an answer to this simple question on the web, but couldn't find an answer. Help would be appreciated.

  I designed a page in indesign CS5 for publication in a magazine. I have a photo with a white background. The picture is a photoshop image. I put it in indesign as a psd.

  On the screen, the white background merges with the indesign default color of white paper. No problem.

  I wonder if I have to worry when the page will be published in the magazine: if not perfectly white, the color of the magazines pages will show the edges of the images in the magazine? What I have to work in photoshop to make the background of my photo transparent so that the edges of the image do not appear?

  On the screen: no problem

  

  On paper:

  I'm afraid that the page will look like this with the edges of the photo showing if the paper is not perfectly white. Here, I changed the color of the paper in indesign in gray (color on the left). You can see the edge of the image with a white background:

  

  Cheers, Remi

  White is the absence of color and, consequently, ink. Make sure the background is perfectly white and you should have no problem because nothing will be printed.

• HP Photosmart C6380 does not scan or print photo with Windows 8

  Just bought HP M6/1125DX/15j with Windows 8. My current HP printer is a HP Photosmart C6380 All In One.  The printer does not work, but the photo and analysis part icons no longer appear which were on my front desk. I tried to download the entire program which said would update my printer, but after 6 tries to one hour each, at the end he just said my download has been cancelled. Is there a chance that my printer will be supported by Windows 8 and how do I do that if I can't download.  Or am I stuck buying a new printer? Thank you

  Hello

  The C6380 is supported in Windows 8 and has a Solution Full Download.  I would try using the Print Wizard to download and install the drivers.

  Try this link for the Print Wizard.

  Print the installation wizard

• Cannot use our new HP Photosmart B210e printer wireless with HP ePrint server.

  We bought a new printer HP B210e for our House to be able to print wireless smartphones, laptops and desktop. The first problem was that our main office, which is about 3 years old and under XP would not find the wireless printer. I contacted HP and after several hours, they changed my desktop to be able to see the printer. Alongside this, they configure the printer to have a fixed ip address.

  It worked well, but I still cannot print from the photo tray. My wife's office has also had the same problem, but we will stop using this office. Not something we want, but she has a laptop computer.

  The main feature that we wanted to use had to be able to send an e-mail to our printer through the HP eprint center. Who has worked on the first day, we have signed, but has not worked since. It seems that our printer cannot connect to the HP eprint center at all. We can send e-mail to our printer through the eprint server. We can see that the e-mail message has reached the server, but the server cannot transfer the email of the printer. We check the Setup wireless on our printer and it is correctly connected to our home network and I can print wireless from my office.

  We're fast approaching the decision of the printer to where we bought it. We do not want to, but have no choice unless we can understand how to print from our smart phones.

  So I ask for help with the printer or a recommendation on which printer you can buy that actually work on our network wireless home. I tried to find what printer is best for this purpose on the Internet but find that there, the information is just too complicated for us to make a decision.

  PS: I see too many complaints about the HP ePrint Center, but very little about HP trying to fix or even acknowledge that they have a problem. I think they do!

  I can't comment on the ePrintCenter (maybe it's temporarily down?) but I know that your printer is capable of printing from an iPhone or an iPad... your smartphone you happens to be an iPhone 3GS or 4? If so, you can use the last iOS4.2 that supports AirPrint and print directly to your printer. As long as your iPhone and your printer are both connected to the same network, that is. I hope this helps.

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.