HP photosmart liked

Similar Questions

• H P photosmart liked: ink system failure

  0xc19a0003 of ink system error code

  printer is saying turn works, I have tried this 4 times and nothing happens

  Take a look on the following document.

  ""Problem with print head,""printer failure,"'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

• iPad can not find photosmart liked

  I can print with laptop (windows xp), Ican print with the iPad I have OS 4.x, but cannot print with iPad II OS 5.x or iPhone 3gs OS 5.x

  simply, they do not find the printer (but the fine worki on same wifi)

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter 8.8.8.8 for the first DNS, 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Liked my photosmart will not print.

  My photosmart liked won't print Microsoft Word Starter 2010 on Windows 7. Screen freezes; printer is "ready". Sometimes, it prints a pdf file...

  OK, run the uninstaller (start > all programs > Hewlett-Packard folder).  Restart, and then download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• compatible product for the range of printers hp b209a

  What is the best replacement fo printer b209a HP? (photosmart liked)

  Hello fredilys,
  
  If you are looking for something similar to the Photosmart B209a, I would say the Photosmart 6520. By comparing the features between the two printers, technically speaking the Photosmart 6520 is an enhanced version of what you currently have.
  
  I have included the "HP Deskjet Ink Advantage 6520 e-all-in-one and HP Photosmart 6520 e-all-in-one printer printer Specifications" for you to look over.
  
  I hope this helps.

• My Photosmart C6380 all-in-One is a liked print black ink.

  It prints color OK.  He is 3 years old and works fine.  I tried to replace the black cartridge with two different new.  I turned the printer market, print a test page, cleaned and aligned printheads without success.  Any ideas on what to try next?

  Thank you for your help.  I wanted to just inform you of what I ended up doing.  I called HP Total Care for the customer service.  They would not not more troubleshoot without perception of a tax, even with the purchase of the new print head.  After hearing the steps I took, they recommended to buy a new printer.  I took the new Printhead and put the old return while they were on a new printer information and return to the print head.  Once I bought a new printer through them, they informed me that I could not return the printhead bought.  The funny part is, once I put the old printhead, it has started printing black again.  Who knows for how much longer, since there is obviously a problem.  So I bought a new printer, but was not allowed to return the new print head, even if it was not working and was brand new.  Very pleased with your support... not so happy with HP Total Care.

• Maintenance of printhead HP Photosmart 6510/replacement?

  I have a HP Photosmart Plus B209a-m CD035a of model that comes with having its printhead failure (CN643A).  Although I work for HP (Enterprise Services), it is too expensive to replace so I bought a Photsmart 6510 AIO.  The B209a-m, I liked how I could remove the print head Assembly and to clean up the grime of the ink of ramps, etc..  It seems that on my new 6510, the print head Assembly can be without mowing of the cart - but once that loose, there is no authorization to remove the print head for cleaning.

  This can be accomplished?  I have to remove a screw or am I missing something?  As this is a new printer, I was trying to assess if this is a negative in my choice, if it cannot be removed for the maintenance cleaning.

  The only thing I have to add is:

  I managed to remove the print head and used a few head cleaning Epson I've had, in order to eliminate the heads black and color. I guess that distilled water would also work. After cleaning the black works well again.

  Remove the cover as described previously by others.

  After you have removed the cover, remove the print head ASSEMBLY:

  1 carefully remove the film (large 5/16") close looking for band that crosses the print head Assembly by; releasing

  the tension on the left side by moving it to the print head, on the right end drag strip out of the corner

  crochet.   Note the marks and which is the top and left and right side for correct orientation at the meeting.

  2. Remove money (2) springs to the rear of the door-printhead

  3. slide and tilt forward support

  4. carefully remove the ribbons of the support cables (just pull on)

  5 have your way of the print head!

  6. then, I shed cleaner down the screens from the top, then slung to force the vacuum through the head on the

  background. I did several times.

  7 Sling on dry excess fluid, pat with a paper towel

  8 reinstall the cables in water, then put back in the printer, the springs and then re-install the thin layer as the Strip through

  guides on the support (do not forget to install in the same way, it has been deleted in the measure of the top and bottom and that end)

  on the right) and then the lid as described above.

  A note: I got a Kodak printer and went through the same thing with her whenever he had sat for several days without use. Cost me a fortune in ink running the cleaning. Looks like HP's more Kodak. My HP printers with ink cartridges that have the printhead on them are no problem. If they do not print right, just throw away them and with the new cartridge, you also have a new print head. It looks like if I continue to have this problem with this 65510 will travel the path of the Kodak, in the trash! Had the same problem with the Epsons so I guess all that's left are brother and Canon!

  Hope this helps some of you.

  FLASH: 25/03/14 arrested black print again! After extracting new hands in the dirty, I found the real problem that everyone is probably cause trouble. There are pipes on the printhead carrier going to the vacuum pump and him on the side of the printer in a tray in felt. Black hose of my print head was completeyl plugged with dried ink. I could rinse with distilled water and a syringe. This work is not for the faint of heart, but if you tear systematically in such things and that the printer is out of warranty you have to lose! I could guide you how to do it if you're interested, but a bit long for here. Write me if you want information ([under the direction of privacy]). I tell myself that these pipes do not allow to draw the head during the cleaning process, the ink of the pump so it dries just in the head. Good luck.

• HP photosmart 7520: HP photosmart 7520 unable to connect to web services

  I am also having this problem. I tried the solutions above. Can you also send the solution for me?

  drzman1

  Welcome to the Community Forum of HP.

  I don't know that to which you are referring - he could be the following:

  By PrintDoc Web services

  PhotoSmart 7520 does not connect to "Web Services"

  You can take a look at the suggestions already provided - they are likely valid for your situation.

  I can also offer you the following:

  Reset Web Services in ePrint printer

  • A method essentially provides the procedure that you find in PrintDocof wire,
  • Two method explains one more 'standard' reset Web Services approach.

  ============================================

  If you are in the USA or the Canada, you can call using Cloud Services.  I suspect that they can help during normal hours, but you can certainly call anytime and see if help is available:

  When to call HP Cloud Services and when to call HP Tech Support

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Photosmart 8250: Photosmart printers won't recognize new ink HP AUTHENTIC

  I have 2 HP Photosmart 8250's and I bought new cartridges AUTHENTIC from Best Buy and TWO printers say that the cartridges are empty or damaged. I took its packaging & installed in 1 unit had this error, then I installed in unit 2 and got the same error, BUT the list of the different cartridges being empty! The expiration date is not until 2017, the cartrideges. I cleaned the contacts with a cotton swab, but always without success.

  Suggestions?

  Kind regards

  Mackjam

  Hi @Mackjam,

  Welcome to the HP Forums!

  I noticed that your HP Photosmart 8250, is not recognize your new genuine HP ink cartridges. I'm happy to help you!

  If two printers give you the error after cleaning them, most likely, these are defective cartridges. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• PhotoSmart 6510 E: all-in-one Photosmart 6510 series is no longer able to connect

  I have recently inherited this printer and eventually got it working a few days ago. Now, I'm more able to print wireless from my computer.  My computer recognizes the printer and I have the ability to print with it, but for some reason any, he says: my printer does not respond when you try to print wireless from my computer. I can print by sending documents to the e-mail address of my printer, however. WiFi is configured and works according to the configuration page I printed.

  Any thoughts?

  Hey @reyn5013,

  Welcome to the Forum from HP Support.

  I understand that you are unable to print from Mac with your HP 6510 Photosmart e-all-in-one printer. I would like to help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• All-in-one HP Photosmart 3200: no longer support all-in-one HP Photosmart 3200

  Hello

  My hard drive crashed and I installed a new hard drive in my office. I installed Windows 10. I was very surprised that I could not download the software and the driver from the HP website, there is no longer support for this product, obsolete.

  I need the driver and software of windows 8, these works also in windows 10. It's pretty stuf on the world wide web, but often, you get a mass of rubbish when you try to download this.

  Can someone help me? Can I get a clean driver with the software?

  @tryer2

  If your printer is in fact one of the vintage printer models:

  Photosmart 3210 AIO,

  Photosmart 3210xi AIO,

  Photosmart AIO 3210v

  then the original driver page is likely is no longer available.

  The following package can work for you - series Photosmart 3200, included in the compilation:

  http://FTP.HP.com/pub/softlib/software13/COL30951/ mp-110165-3/AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe

  The software is designed for Windows 8.x - it can also work in Windows 10.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Photosmart Plus B210 do not print the Photo - Vista and 7 - USB tray and wireless

  Experts!  Help, please!  HP support by phone could not find a solution.

  I bought a new Photosmart Plus B210 last month.  I am a moderately advanced computer user and have not been able to print a picture of this printer, EXCEPT when printing directly from a card inserted into the machine.

  I installed the printer on two laptops, one running Vista, the other running Windows 7.

  The problem persists if printing wireless or USB.

  The printer works perfectly as this major problem.

  Thanks in advance for your help.  If I can't make this work, I'll have to return this printer and will likely purchase another brand.

  Carrie

  First of all, in vista - please turn off the printer, restart your pc and to clean the print queue and turn on the printer.

  Now, make sure you select the exect for the tray paper size, that the same for the type of paper and size when printing... now see if there is a difference.

  What about win7 - what do you want to see exectly? the option is grayed out? You may see other options to select related to it?

• HP Photosmart C7280 ink system failed

  Ink failure system 0xc18a0206 error, can someone tell me what this message means?

  Hi Jorge62

  You can try the suggestion of Bob here...

  (Please let me know how you go)

  Thanks, Ciara

  http://h30434.www3.HP.com/T5/ink-cartridge-and-printhead/Photosmart-C7280-ink-system-failure-will-not-print/TD-p/720845/highlight/true/page/2

  There is a hidden menu support with a reset replacement procedure that can help: power on, press both the # and * buttons.  The screen should say something like "enter the special sequence".  Currently, press 1 then 2 then 3 which will bring up a menu of support.  Use of the < and=""> the arrow keys to navigate the menu that says "Hardware reset" or some similar.   Once reset the hardware has been selected, press OK, OK.  Once it is finished press Cancel (X) to move up one level in the menu, then scroll down to find "ink initialization", then press OK.

  This model has a permanent printheads which cannot be deleted (or replaced). Unfortunately, I didn't know all the solutions beyond the reset of the printer, if the option is to fix the printer.

  As you have noted, it is not likely to be economic for this model.  If contact you HP they may offer a discount on a printer replacement, although I've seen people indicate that careful shopping can beat the discount price of HP.  AFAIK there is that no HP models currently use fixed print heads, these have replaceable user in current models.

  The "abnormal termination" message will occur any time the printer has an error with a code (0 x.rror) assert condition.  At this point, the confused printer and do not realize that the power to close properly.

• Photosmart 2610 yellow color will not print

  My Photosmart 2610 is a pig.  She refuses to print Yellow.  I went through several routines clean and preferred and changed the cartridge for a new brand, but nothing raises any dribble of yellow.  Any help would be appreciated - thanks.

  I would gently pat dry the printhead on a damp cloth.  A working cartridge will have a strong task of cyan, magenta and yellow.  I suspect that your cartridge will show only cyan and magenta.

  In this case, there are a few things to check.  Are the original HP or reman cartridges / filled?  The latter usually have poor quality, see the study here.   The other possibility is that the cartridges are original HP but outdated.  There is not all "expiry" on these cartridges that might lead to print does not correctly after a certain date, but very old cartridges may have failures in one or more colors.  Check the end of warranty date (two years from the date of production) as indicated in the paper here.  This date is also usually printed on the lower right front back the package.  If the cartridges are very old and well beyond the end of warranty date, this is the likely cause.

  As a temporary measure, it can help to soak the cartridge in about 1 "of very hot water for about ten minutes, with the nozzle to the bottom plate.  Remove the cartridge and gently dry the electric contacts with a lint free tissue and try to print.