HP photosmart more b210e

Similar Questions

• Photosmart more B210e alignment failed

  I uninstalled, unplugged, rebooted and installed it again.  I always get an alignment error.  I can not even find product model # on the email support page.  There only B210; b; c. no e.    I hate so much ups brand new that everything settled.  Any help appreciated.

  Ok.  Has also had the unplulgged mine. It is also now working.  Successful first time alignment.  So, since I started it, although I have not implemented any photo to print again (so I am not sure) I have to say resolved.  But don't ask me how.  And I still don't know why HP doesn't recongize that printer.  Just a b and c.

• HP Photosmart more B210e - no more paper - load paper into the main tray

  
  

  Hey fanblade,.

  Thanks for the detailed post describing the problem you are experiencing.  Looks like that paper inside the printer sensors have a problem with the detection of the paper in the tray.  This may be due to rollers be dirty and unable to take the book, settings problem or possibly an electrical problem in the unit.  I recommend the steps in the document below.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed

  I would like to know how it goes as I steps to perform a factory reset on this printer,

  Jason

• Photosmart more B210e - print too close at the edge of the paper to the top edge

  I have a document I printed before without any problem.  Today, I made a few revisions; but it will not print properly - it prints to the edge of the paper [as it ignores the margin]; as a result, the entire document is offset.  I checked my revisions to make sure to not remove or add any formatting, etc..  This document is printed landscape and a table with 4 columns and 2 rows.  Everything that I printed today is correct.  I restarted my laptop and my printer.  Any help very much appreciated;  Thanks in advance... ahintx

  Hi Sahintx,

  Thank you for the additional information. It seems that the paper is not be charged correctly on the paper tray. Follow the steps outlined in the document below and then let me know if you continue to have the same problems?

  The all-in-one is not looking upwards or feeding of the paper in the Photo tray

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?

• Photosmart more b210a

  I had my B210a Photosmart more for awhile & went through several sets of ink cart.  However, after the last cartridge change, something strange happened.  I do a lot of printing labels, & the printer began to print about ¼ "too high, to align with the grid of the print.  It does now, on every print job.  It seems that the paper is not synchronized qued. with the print job, & picks it up just a little too late.  The first line on any job 'print page' is split in two, on the top edge of the page.  It was always perfectly aligned before.  This is the first problem I've had with this printer, otherwise, it was just great!

  Jason;

  I've tried it & it has not corrected the problem, however, while there, I found a button that says "default printer"!  Ta - Jean Pierre, back to normal!  Thank you very much for the help.  Because even if this didn't solve the problem, I found the button restore everything by working on your suggestion !  I had spent several days trying to troubleshoot & fix the problem in the computer program, & this button does not exist here!  Have a wonderful day!

  Thank you & God bless;

  Jim

• Installation CD for HP Photosmart and B210e Plus that supports Windows 8

  I just bought a new laptop with Windows 8.  I tried to install my printer HP Photosmart Plus B210e with the installation CD, and it supports up to Windows 7.  I can still use the printer since Windows will install the necessary drivers without the CD.  The problem I have is that the printer is ALL that I can use without an installation CD that will support Windows 8.  I can't use my photo software that came with the printer or scanner.  I also need to print pictures and others and cannot do it either.  I've scoured the forums and the internet for a solution and so far I've found nothing on it.  I thought about the reorganization of a CD through HP, but why bother if it doesn't have been upgraded to WIndows 8 support (and when I drilled down on the details of the CD to see if it DID not support Windows 8, it wouldn't let me the info of the CD).  Can someone help me with this please?  My printer is just a little over a year and it of pretty frustrating HP knew that Microsoft would be the release of WIndows 8, but doesn't foresee everything to cela or provide information to their customers before selling all of these printers.

  Hello

  If please download the second utility from the following link and run it on your computer Windows 8:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=4134821#N297

  It will you ask some simple questions and help you to install "Full Feature software and driver" on your computer.

  Kind regards.

• I installed my photosmart more b209a on a new computer laptop and say, I got error 1722

  I installed my photosmart more b209a on a new computer laptop (windows 7 64 - bit); but during the installation I get the ERROR FATAL error message 1722. .and it says "Fatal error" and "MSIFlash player"... clicked on OK and the installation continued and finished!

  Now I can print the docs and photos... but what is the meaning of it?

  I will just continue work - assuming that everything is OK - or what I need to do something about the flashplayer?

  Hi deboraey,

  If the printer works ok then the installation was successful. You can go to the following link and update Adobe Flash player on your computer.

  http://get.Adobe.com/flashplayer/

• HP Photosmart more B210 not selected

  With my HP Photosmart more B210 printer, I accidentally not selected as the default printer.  I followed the video instructions to select this option to return, but he would not choose and instead, was a symbol of "troubleshooting."  There is no problems identified through troubleshooting.  I tried deslecting all other options down the left and always the symbol of "Troubleshooting" stayed.  When I tried to go to a frame earlier, the PH site says that there is no previous setting.

  At this point, I would say select you "remove device", then disconnect the USB cable.  Download the full driver recommended from HP here and reinstall the printer.  Do not reconnect the USB up to be instructed by the installer.

• Photosmart more b209 yosemite pilot

  I have a photosmart more b209 printer/scanner/copier.  is it covered if I upgrade to yosemite driver?  Please say yes, I love my printer!

  Hello

  Welcome to the club. Please check:

  http://support.HP.com/us-en/document/c04473034

  Good luck.

• Reset password on photosmart more B210A-Mac. How are you?

  Reset password on photosmart more B210A-Mac. How are you?

  Good,

  If you have changed the password for your wireless network and you must reconnect the printer to the network, is that OK?  If so, then restore the default settings is remove the printer from the network and allow to run the Wireless Setup Wizard again.  This will allow to connect to the network again, but with the new password that was setup.

• Just bought a B210a Photosmart more impossible to print a picture black and white, green to come.

  Just bought a B210a Photosmart more cannot print a picture black & white, green to come.

  This seems to indicate that your magenta ink is not printing correctly.  Try it troubleshooting steps described in this page.

• HP Photosmart Plus B210e but can't seem to connect to my Verizon Fios router

  I have the HP Photosmart Plus B210e but you are unable to connect to my Verizon Fios router which is an Actiontex M1424-WR.   The printer detects the name of the router and I enter the WEP key, but it does not connect.   The diagnoses listed without filtering status summary do NOT.   I connected to my router and checked that no MAC filtering is enabled.   I have two laptops which have no problem connecting to the router.

  OK, so a simple reboot of the router solved the problem

• I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation.

  I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation. It it not a cartridge 564xl. I am really considering to resume this printer and turning it.

  Hello

  What seems to be the issue. His are more in there or something like that? If so, check the icon on top of the cartridge, it should be a Hexagon, if you want to mount a "bow tie" it does not, since it is a photocartridge that is not supported by your printer.

• HP Photosmart more e-All-in-one Priter B210e

  Printer prints all colors except black. There is a? in the upper right corner of the screen.

  I tried to clean the printheads several times without a bit of luck to solve the problem.

  I had this problem before and clean the printheads always worked.

  What is the meaning of the? mark on the upper right of the screen?

  Hello FES36,

  Welcome to the HP Forums!

  I understand that you do not receive most Photosmart B210E ink. I'll do my best to try to resolve this problem. Please make sure that you have performed all steps in this HP document on fixing of the streaks of ink faded prints and other common Print quality problems

  Make sure that the ink cartridges are properly ventilated:

  

  In addition, the question mark on your printer shows usually upward when you go into the settings of your printer. If you tap the question mark, it opens the Help menu. Now, if you are still having the same problem, then try these steps of wire Bob_Headrick .

  Please post your results, I'll be looking forward to hear from you.

  Have a great day!