Photosmart more B210e - print too close at the edge of the paper to the top edge

Similar Questions

• has 6500 all in one printer E710: 6500 HP printer prints too close to the top in all programs

  Printer prints too near the top of the page with each print job.  With printing of items such as cards, you cannot adjust the margin down so it doesn't work well at all.  He used to work, but some time ago he began to print closer to the top.  I uninstalled printing drovers and reinstalled the latest, and it does not help. I also used the doctor for HP printing and it did not help either. I spent all the rolls, etc., but din't help. Any help would be appreciated.

  Please come back to me @Birdiesis.

  The question of quality that occur of independent, it is clearer that this is strictly a hardware problem. Even though you have already cleaned the print heads, I recommend that you work your way through the following alignment oriented troubleshooting workflow:

  Reset the printer

   

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?

• HP photosmart 7510: alignment of the paper. When I print to my 7510 always prints too far to the right.

  When I print to my Hp photosmart, 7510, wheter be photos via AirPrint on. My IPhone or the Documentation of an environment of windows 7, or Mac os X or even my old windows xP it always prints too far to the right on the paper. This result s in all the text is visible. For photos of the result, is a white edge on the photo and cut off.

  I read manual and I have confidential amputeret that the paper is correctly placed. Else all works well, AirPrint and all absolutely no problem. updated to the last companies

  BECN, I saw this problem caused if ever there was a paper jam and something has filed in the mechanics of the printer. Here is a video on how to check for this:

  http://goo.GL/IDtwa

  Also, just to see if it is more than hardware/software partners, can you make a copy of the scanner and tell me how it turns out?

  Let me know!

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• Text field: first character too close to the margin

  Hello

  I created a form with input fields. When the user fills out the fields, the first charcater is always too close to the left margin - as, for example, it is difficult to distinguish a '3' to a '8' (see attachment).

  How can I change this?

  Thank you very much

  HeikeK

  You can change this by setting the withdrawal left at 1 mm (or whatever you want). In the window > paragraph.

• 6500 copies too high to the top of the document

  Printing: 6500 has more E710n-z

  Op sys: Windows 8.1

  The printer prints too high on paper: the 6500 prints even his own test page with lettering half cut off at the top. Printing from Word is the same, so it's not a software or application problem.

  HP update is defined on, and the drivers are the latest: Firmware = CIP1FN1206AR, the version of the software = 028.000.1315.000, 09.84.00.1189 = driver version.

  I saw this issue raised in other - apparently hard for a few years - messages and responses were not useful.

  Can we remedy and suggest or offer a remedy?

  Hi Blennerhasset,

  I understand the printer prints too high on the page and even the test page is cut off. I see that you already have a troubleshooting, but since I'm not sure what you've done already I suggest all initially an alignment;

  1. Load US letter or A4 size, unused, plain white paper in the tray.

• The paper is picked up too soon and the top of the page is still too high

  The paper is picked up too soon and the top of the page is still too high

  I have an HP Officejet 6500 A Plus

  I had a paper jam

  I took out the paper

  As I pulled the paper, now the print jobs are too high on the paper.  It seems that one of the gear slipped a tooth and top of page paper is not aligning properly.

  Hi @Kingvigor

  I understand that since having, and clear a paper jam, the paper is now driven by too early. Let's try the cleaning rollers and an alignment. Open the following document and move on to the solution five; Solution 5: clean the rollers.

  Once it is finished, complete the following steps to align the printer;

  1. On the printer control panel, press the right arrow key (), then tap the Setup icon (). The installation Menu appears.

• How can I activate the 'print spooler server' at the top of a tower with XP.

  How can I activate the 'print spooler server' at the top of a tower with XP.

  Step by step instructions: -.

  http://www.ehow.com/how_5993418_troubleshoot-Server-service-not-running.html

• HP Photosmart more B210 - printing is too high on the paper.

  The text is too high on the paper.  I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels.

  I tried to change the paper size under tray settings/Main properties/device of the "letter" to "A4" - click on apply and OK - but when I check that the setting is always "letter".  Don't know if this is causing the problem, but if the book 'Letter' measures are lower than those of the A4 paper, he could be--and I wondered why I couldn't set this parameter.

  The printer is related to the Windows XP laptop and desktop Windows Vista computers.

  I hope someone can help.

  If the changes are not stick when made directly in the driver, the driver is probably corrupted. Try to uninstall and reinstall the printer driver and software package. I'll link the latest version below. Let me know what happens.

  HP Photosmart full feature software and drivers

• Re: one photosmart more coper/printer/scanner not to talk to the laptop

  1st stop I'm under Win7 32-bit home.  The printer will copy the built-in scanner pages and print them very well and printers autotest reports everything is fine.   For awhile, I had a problem with any computer see the printer via the USB cable.  I would like to do a clean install from the cd and the printer work fine until that 1 or more of the following has happened past.  The laptop is turned off or restarted, the usb cable is disconnected, or the printer is in sleep mode.  At that time there Windows Guard reports that the printer is offline.  I tried to restart the laptop and printer.  I tested the USB cable, the cable is fine. So I completely uninstall everything to the printer and do a clean install. And once again the printer is fine until you restart the laptop, or the USB cable is disconnected or the printer goes into sleep mode and new Windows does not see the printer.  The wireless connection to the printer was working fine then I don't care for the problem of USB cable until we lost the Charter ISP (wireless to the printer has been by the charters router in my house).  I have ISP back up now.  But the printer connects to the laptop on the ether now of wireless connection.  I need a new printer or what?

  Steve

  Hi Steve,.

  Did you try the document on Center of troubleshooting wireless printing?

  Please let me know!

• Photosmart HP 5510: printer not connected to the network, although it

  Hi people,

  I am at my wits end with this and you are my only hope (what Star Wars quote).

  I have a HP Photosmart 5510, I've had around 2011.  I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.

  However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.

  I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).

  I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.

  Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:

  "YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.

  What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.

  I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.

  Hey @Mvdarbs,

  Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.

  Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.

  I recommend you try the following steps:

  (1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."

  2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.

  3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.

  4) remove the printer from your Mac. If you are not sure how, refer to the

  guide for advice.

  one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.

  5) reinstall your printer: click here and install the driver that you are prompted.

  Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  See you soon,.

• HP Photosmart 7520: My printer makes me save the document first instead of print only

  For some reason, now my printer saves me everything I want to print first in my documents, and then I have to go to the documents to print it from there.  What is happening with my Office Windows 8 and our Windows 7 laptops.  I can't just hit print more and it will print, can anyone help?

  Hello

  It is not the printer who, it's Google Chrome you use (Please correct me if I'm wrong ).

  Chrome print dialog box click the button modify and change to save in PDF format on your printer, and then it should print instead of saving the file.

  Please let me know if this can help,

  Shlomi

• prints too far to the bottom of the page - officejet pro 8600

  Have an officejet pro 8600.

  Recently, when printing, two problems occur...

  (1) the document printing starts printing about 1.5 "to 2" further down the page then it should. This translates into the lower part of the document is not printing.

  (2) there is a crease/fold about 3 "from the top of the sheet.

  It seems that the paper is loaded too soon or that actual printing is delayed.

  We have cleaned all rollers and check the wheel star - no damage

  Thanks for your help

  Hello

  I suggest you rework the printer.

  Setup menu > tools > align printer

  Let me know the results.

• Print gets scrambled to the top of the screen down, I look at a selected site?

  Print-screen gets progressively blurred for the top down when watching / reading text on a Web site. It is not related to the Web site as this happens on all websites. Seemed if shows up after the last update. Cure?

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes