HP problem graph m6 - 1158ca

Similar Questions

• Problems graph/WinUpdate problem/updating BIOS-> XC-605-EB31

  Hello world!

  I've been trying to contact support any longer, but for some reason, my SNID and S/N are never recognized...

  Anyway,.

  I have an AXC-605-EB31, which was Windows 8, processor Intel Core i5 4440, 1 TB of disk at the base, hard, Intel HD graphics, DDR3 memory.

  As I started for the first time, there was an update immediately for Windows 8.1. After a Win8.1 update a few monts after I received my computer, one of my games have started to bug out, and I heard him could have been caused by the game itself being too old for the card intel that was too powerful for her. In the end, I left the game and never returned to it. I think I did something at the time, but I can't rememeber. I could have tried to downgrade it to a certain point.

  Over time, the Windows 10 updated by, so I signed up and got the update the day 1.

  I should mention that I've had several accidents of graphics card, happening from time to time. But I expect an update Win10 to solve the problem.

  Later, Minecraft, a reason some have had problem loading textures and I still do not know why. At time, came on the Acer website to try to get support but could not do it all (and I didn't not Community existed...), so I went to Intel to try to solve the problem... to nothing does not. In the end, I decided to get a new card graphics (a Radeon HD 6450) to replace the current one buggy. He solved the problem... but no accidents.

  and here are the problems I have lately:

  Graphics cards crashes at least once a day,

  Graphics cards shows me a strobe of light whenever I try to update to the latest version.

  Microsoft Update gives me a 'White' error message when you try to update the most recent updated (I'm stuck on Version 10240)

  When we talk in the Microsoft community, we arrived at the conclusion that I need to update all the drivers (I did each of them manually, using the Exe file in each pack, even the Intel graphics card, but I'm not sure it worked properly...) and update my BIOS.

  My current BIOS Version is "P11 - A0" and the most recent is "P11 - B4". I was told to be extremely Moses with the update so I read the 'Readme' inside the packaging... but still don't know what to do.

  So I would like some support as to how I can update my BIOS, the issues I currently have:

  -What does it mean by "Booting Windows system"?

  -Where the 'BIOS package'? The provided screenshot says 'C:\D11\Normal\Win', but it makes no sense as I am launched on "C:\Windows\System32." And I'm stuck here like he told me to go and place the BIOSon... a flash drive which is 'E; \ »

  -Do you think I'm on the right track with what might cause the problem?

  Thanks for taking some time with me.

  Copy BIOS Win and Rom files in c:\

  Press the logo key windows + x

  Select prompt (admin)

  Once on the command line

  type

  cd\

  Press enter

  type

  CD victory

  Press enter

  type

  Flash.bat

  Press enter

  It will start flashing the BIOS

• Graphic problem with Satellite A200 - 13 M

  Hi all
  I apologize for my English, I'm not a native English speaker.

  2 months ago my laptop wouldn't start.
  I call the Service after sale who tell me to send it in for repair.
  No problem: my laptop came back to me, and it worked fine.

  Now there is a * new * problem (graph): sometimes, and I don't now why, the screen is dirty.
  You can see traces white and white dots all over the screen, especially near the icons.
  It's a little more difficult to explain precisely in English.
  I tried to make a screen, but the bug appear on it; I'll try one tomorrow...

  To make them disappear, I just close the screen, making my laptop into hibernation, and when I open it upwards (immediately), everything is good.
  + Damned, having bug comes back! +

  Someone had this bug?

  _Edit: _
  They have changed the card mother + CPU + graphics card.

  You have described the issue is really strange
  I can t image it could be exactly but if that appears after your GPU and CPU has been changed so I recommend you to contact the ASP again and wonder what goes wrong.

  I put t know if you use a newer graphics driver and BIOS, but you should check if the problem persists even with the update of the BIOS and graphics driver.
  But if you see any improvements so a call of ASP is required

• Graphics / CPU capacity

  I have an Office Alienware X 51 R2, 64-bit Windows 7 Pro, NVIDIA GeForce GTX 760 Ti with 2 GB memory GDDR5, 16 GB Dual Channel DDR3 at 1600 Mhz and a 4th Gen i3-4130 processor, 3 MB Cache ~3.4 GHz.

  I said "you use this awesome card an i3, which will cause you problems (graphs) If you try to max your graphics card can do and wait for the processor to keep", I tend to think are nonsense, but I'm not sure.

  Someone at - it an entry on an upgrade of CPU as possible, if necessary for performance?  Or is my CPU very well?

  In fact, all components are very good, however, if you want to upgrade the CPU, you can go for the following points:

  • I3-4130
  • i5-4430
  • i5-4440
  • I7-4770
  • I3-4150
  • i5-4460
  • I7-4790
  • I7 - 4790K

• Pavilion g6 - 2379sr: graph Pavilion g6 problem

  Hello!
  
  I have problems with my HP Pavilion g6 - 2379 sr video drivers.
  Windows 8.1 operating system (x 64)

  Graphics card: Intel HD 4000 + AMD 7670 M

  When I first installed Windows 8.1, my Intel HD graphics drivers and AMD, the two came via WIndows update, everything worked, except fans made a lot of noise even when the PC is idle. I was suggested that I should install the official graphic drivers by manufacturer. So I downloaded the AMD drivers (which should include the drivers Intel aswell)
  on the site of HP my laptop support specific. And now the fun part begins, applications that turned 55 frames per second before, now, is down to only 3 to 5 images per second, no matter what gpu are assigned.
  I have no object in the BIOS settings related to switching of graphs, and no BIOS update is available for my laptop running WIndows 8.1 (there are updates to the BIOS for windows 8, but I'm not sure if I should use this driver for the update).

  Device Manager indicates that two graphics cards work fine, but of course, they are not.
  
  Any kind of help would be welcome!

  Solved my problem!
  
  Apparently the drivers for HP support are not the best choice!
  What to do if someone has the same problem:
  
  1. download the latest drivers Intel HD of the Intel Download Center (make sure that the drivers downloaded matches your Intel processor generation).
  2. download the latest AMD catalyst AMD Download Center.

  3 disable internet access for the entire process stop windows update to automatically install the drivers. (do not enable internet access until all the drivers were re-installed manually).

  4 uninstall the Intel HD drivers via the control panel - uninstall programs.

  5. restart the PC.
  6. express uninstall all the drivers AMD via Control Panel.

  7 restart the PC.

  8 install the Intel HD drivers.

  9 restart the PC.

  10 install the AMD drivers

  11 restart the PC.

  12 turn on the internet connection.

  Now you should be fine, also fixed my problem whitch I previously had on fan makes a lot of noise all the time.

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• the property of the graph XY value node labels problem

  Hello

  I have a XY Chart, and in coding, I have introduced into different clusters (cluster of two elements, each of them is a table 1 d).

  To sort the chart "remembers" the old data labels (data type, see background windows help), and I can just change it to the new.

  Let me explain better with this picture:

  

  The goal is to get the appropriate data type when I read data from the XY graph through the property node. I want to see 'curve' when I ungroup by name, not a former name of "DAC (V).

  Please don't tell me to delete this graph and create a new. This of course solved my problem, but I would like to know, how I can "force" a XYGraph change its names of data types...

  I've also attached a VI test to show this behavior...

  Suggestions?

  Thank you

  Kind regards

  Yes, it seems to keep outdated information. I was able to remedy to temporarily a table 1 d complex wiring to the terminal of the XY graph, then your cluster back wiring.

  

• Problems with graph XY 'forget' field properties

  I have problems with a graphic XT in my loop.

  The graph has 10 locations which at any time can have anything from 0 to ~ 1000 points, often a few plots will have much less ploints than others. There is an option to select the user to view all items or just the most recent game.

  My problem is I want the chart to reflect the data input and a single point during an update, so I have a string of points rather than a line.

  When I click with the right button on the chart and go to properties, I change the style of point of full circle and turn off the interpolation of the line. I then click on save these default values and save the vi.

  However, once I run the vi, the graph keeps parcels 1 through 9 (not ground 0, this remains as I want) to have no displayed point and the line of interpolation on.

  Anyone had this problem before? Ho solve you this problem?

  I know it can be fixed, because I had this problem a few months ago on a similar vi and after weeks of struggle, I solved it, but I just do not remember how I did it.

  Thanks for any help, at the moment I can't post any code. Note that the chart data show is all perfectly fine, just the properties of the plot are forgotten.

  HI DarraghCorrigan,

  With regard to the problem expressed in your initial post:

  "once I run the vi, the graph keeps parcels 1 through 9 (not ground 0, this remains as I want) have no displayed point and the line of interpolation on."

  This is due to a bug in the software LabVIEW by which all changes that are made to the parcel properties (for example to change the color of a conspiracy) will not be retained, except in field 0 that is not affected. Our R & D department are currently studying this problem so that it can be fixed in future version of the software. The solution recommended for this problem is to pragmatically set parameters of track at the beginning of the code using nodes of property.

  As I understand it, is not the main issue you are experiencing. If you are setting the properties for a field (using a few nodes property described (e) which are then deleted or rewritten on a XY Chart, I understand, is that there is no way that LabVIEW can remember and preserve these properties.

  As you rightly suggested, a way to easily overcome this problem would be to define default chart properties, so that when you remove/rewrite a piece and then add it again, it is always by default these properties. Unfortunately, it is not currently possible to do even if it was recommended as a suggestion of product is a feature that is to the study of implementation in future releases of LabVIEW.

  I think that the question you need to address is the fact that you're at some point reset the graph by sending an empty array to him such that the set of your property are lost. If you can find and remove this section in your code, you should be able to solve your problem.

  I hope this helps.

  Best regards

  Christian Hartshorne

  NIUK

• problem of waveform graph

  I'm working on a graph of waveform for a project, I want to use a node to control the time of the chart base. It works, but switching during the chart will display more divisions that I designed for a very short period of time, which is annoying. I have attached the vi and I'm appreciated if someone could help me on this problem.

  

  Just found the solution, it seems that I sequence the function of the node of the property or the graph will be confused. Your suggestions has informed this solution. Thank you!

  

• Excel & ActiveX: Insert arbitrary columns of 2D array and create problems of graph

  Hello

  I want to insert data in a 2D of LabView or 1 d table in Excel and create graphics.

  I used the information in the following example:

  http://www.NI.com/example/28934/en/

  and has managed to create a new Excel file (I use Excel 2010) writes data in a 1 d table to a column in excellent by creating a while loop and using the first element of the array to write in a specific cell. I use the loop counter to write to the next cell when the loop starts again and always remove the first value, I write to the cell of the table until it is empty.

  Now I also want to write a 2D - column in Excel table should be the first column of the matrix and so. Here, I can not use the loop counter directly as Excel there are only 1,2,... for the lines, but uses A, B,... to count columns. Also I do not know in advance the number of columns my 2D array will contain, thus creating a lookup table as (A means 1, 2 B, which means...) is not really an option (except there is really no other way). Is there a possibility to convert numbers into letters or somehow to "explain" to the program that this column 2 of the table means column B in Excel for example, or is it possible to insert new columns?

  I figured out how to add new calculation sheets and as I also need to create a certain number of spreadsheets and I know that the standards 3 sheets are present during the creation of the file, I use the method 'Add' to create new worksheets before the worksheet 3 - I could use the same method to create new columns in Excel , but so far I have not found a method to do. Or is there a way to enter into the 2D table all at once?

  So I want to create a chart (in case 1 d tables draw a bar when using 2D arrays a 3D field) to display the data. I found this example:

  http://www.NI.com/newsletter/51339/en/

  -> that I do not have the tool box I would do it directly using ActiveX, so I tried to make things as shown under the title "ActiveX DIY /.» NET'

  I tried to load the code snippet into a new Excel file but got the error message "microsoft.office.interop.excel.dll" not found and this is why the code does not work. Which confuses me a bit as I guess when this dll is not present I can not access Excel of LabView at all, although my understanding of what I'm doing so far is limited in the calm. ;-)

  Also - as far as I understand the extract - when you create a new graphic object, I should be able methods to create for her, however when I do a right click on the graphic object to a symbol of the spreadsheet ActiveX it no listed.

  To explain my problems better, I added an excerpt showing my two problems: the inside of the two loops while showing how to import a table 1 d. In the outer loop I separate the columns. I know that is not currently as has all the data in the column of the Excel sheet - so I need to convert the external meter number a, B,... or find another solution.

  In addition, on extract, I placed a property ActiveX spreadsheet with the Chart object - I can see that the difference to the graphics object of the example code of the last link above is the color. However I do not know what it means and how to change / fix this.

  And just to make sure - I know that this path that the VI is not running as the graphical object is placed completely false – I just did, so it is included in the extract.

  I would be grateful for any suggestion,

  Thank you!

  Hi all

  for your information in professional 2014 LabVIEW report generation toolkit is included

  Table 2D

  I want to write table 2D in specific columns/rows in excel

  Graph

  Create a graph through ActiveX Labview traced XY scatter on an excel sheet

  also good information about Excel and ActiveX

  Excel Council

  Hope that if aid, if not please let me know.

• Alignment in a graph where build problem

  I would appreciate your help.

  I turn around to try to align a legend of a graph.

  My application is coded in Labview 2014 in Windows 7. Before it was on XP and LabVIEW old and I had no problem.

  I have a user with a graphic interface. I did my good interface look. When I build the interface is not the same in the exe version. I have a copy of what should look like the interface. I also have a copy of the interface in the EXE. In the image of the exe, I circle the part which is not align. Is their way to correct that?

  Thanks in advance!

  I solved my problem with the creation of a control of typedef with my chart. When I first open the control to customize it, I notice that if I try to change something on the chart legend Dungeon are dwindling.  Probably, the size it is in the EXE file. So I tried to adjust size so that the size does not resize itself in the window customize. Then, with the setting of the size, I create the exe and the size has not changed.

  I hope this can help someone else!

  Thanks for your help

  Cynthia

• Resulting graph problem

  
  

  The above is true. There are also a number of other problems with the code:

  • The specific comparison above makes no sense. The comparison occurs after the loops terminate, and the value of the wire will always be the same, unless you change the number of iterations, you're not. Aren't you stop the loop for with a stop condition, so it can always work of 250 times. What is the point of the comparison?
  • The attempt to delete the first line of the file that is being read is incorrect. Making connections a zero to the input length.
  • The State of the 'pressure to select and Alpha' is to get pieces of 180 values. Unfortunately, you have read 10000 lines, but deleted one, that leaves you with 9999 lines (rows), which divides not evenly with 180.
  • Loop used to create the table 2D 'Pressure selected' and 'Selected Alpha' can be made with a function of matrix to remodel.
  • The use of the Express VI formula causes the unnecessary use of dynamic data. For example, in the State of "Calculation of PV" (which is always written to the file), the Express VI formula can be replaced by a simple primitive multiplication. Also, since the XY Graph Express VI Build resets the chart data whenever you don't even need to use this Express VI. All you need is a single function of Bundle. Make these 2 simple changes to delete all the conversion of dynamic data in this State.

  That's all for now.

  EDIT: I forgot one:

  • In the State "Get settings" for a loop a uninitialized shift register. Not sure if this is intentional or not, but I suspect that it is a mistake.

• Problem running graphs in the OEID 3.1 sample application

  Hi all

  I just installed OEID 3.1 and I am trying to execute the sample application provided by oracle with reference to the procedure described in the section "Creating a sample Application of data Ingested with ETL Integrator" in the guide getting started in OEID 3.1 documentation.

  I have ingested the sample data in short using the EID31_SamplePipeline.zip pipeline Integrator ETL server.

  Now, when I try to run the chart named Baseline.grf using the IDE of clover for ETL Integrator, it throws errors - following

  Graph execution '. / graph/InitDataDomain.grf ' failed!

  Error during initialization of the graph.

  Initialization of the component failed [create Data Domain: CREATE_DATA_DOMAIN].

  Unable to create the Web Service proxy.

  Cannot establish the WSDL parser.

  Cannot read the WSDL to location ' https://localhost:7002 / short-server/ws/manage? wsdl '.

  WSDLException: faultCode = PARSER_ERROR: Wsdl not found https://localhost:7002 / short-server/ws/manage? wsdl

  Inner exception: element [CREATE_DATA_DOMAIN:Create Data Domain] - initialization of the component failed [create Data Domain: CREATE_DATA_DOMAIN].

  
  

  Note:

  I use the basic SSL communications.
  

  I even updated to 7002 port numbers (this is my SSL port for the server for short) in workspace.prm and I even changed my graphics for https rather than http.

  But I still get this error.

  I added VM arguments in JRE for trustStore and keystore and passwords corresponding paths.

  I added the same IntegratorETL.ini file too.

  I've also marked compatible SSL also true for components that have this property.

  
  

  Interestingly, I'm even able to load the wsdl from the browser file if I get the URL

  https://localhost:7002 / short-server/ws/manage? WSDL

  While the ETL Integrator Designer mentions the exact URL even when he gives with the exception of WSDL saying Wsdl not found.

  
  

  Can someone tell me what could be the problem and how I need to solve this problem?

  Any help/suggestions appreciated.

  
  

  Thank you!

  Christophe

  
  

  Hi Christophe,

  I have consulted several groups, and although it looks like initially a hostname resolution problem (it came a lot), support was offered that this is related to the fact that you try to run the sample application in SSL mode, while the Start Guide that documents this application indicates that it is running using the no - SSL only. In other words, when you install the software for the purposes of execution of a sample application (and not for production), you must explicitly uncheck the flag SSL. This is not recommended in production.

  So, I suggest to uninstall and reinstall in non-secure mode.

  Please see the requirements on the sample application here. The doc has a requirement of "without SSL:

  http://docs.Oracle.com/CD/E40518_01/General.310/eid_getting_started/TOC.htm#about%20these%20Installation%20instructions

  Hope this helps and sorry you need to reinstall.

  Julia

• Tag mounting problem for Facebook Open Graph HEAD

  In the page order to play nice with some of the new features Facebook they can add the content of the meta tag to identify the page as a specific "object" in the graph of Facebook.
  
  The problem is that they ask allows you to add information of namespace as an attribute in the head tag, and when I try to put anything in the actual markup itself I get an error:
  
  Header must contain a < head > and < / head > tags.
  
  
  I try to do the head tag look like this:
  
  < prefix head = "og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# my_fb_app: http://ogp.me/ns/fb/my_fb_app#" >
  
  I have an end tag for the head, I just thing the validation fails if you put anything in the head itself tag.
  
  Any ideas?
  
  Thank you
  
  Greg

  Hi Greg,.

  We have published a Patch Set Exception (PSE) which corrects this bug, and that can be run against a 4.1 4.1.1 or instance. You can get the PSE by going to My Oracle Support and you are looking for the #13804236 bug, then download p13804236_112020_Generic.zip and follow the readme.

  Hope that helps.

  Kind regards
  Anthony

• Problems of the graph Editor

  I'm trying to change the speed of image space key in the graph Editor.

  To key in particular image (one shown), the speed drops to 0, and whereas I want the speed to drop, I don't want to surrender completely to 0.

  I tried selecting the small square with the Selection tool and dragging it up a little bit, but it just creates a new image that I can drag and down the curve, it won't move the original one himself.

  It's really annoying me, I know what I'm trying to do with the chart, I just can't get it to work properly.  I tried to read the documentation from Adobe, and it seems that I should be able to drag this second keyframe without problem.

  

  I don't know that you should be changing the speed graph. Speed graphics are very difficult to understand. You should be able to recover the square box and move at the speed upwards or downwards.

  Try to change the graphics of value. If you want a constant movement between keyframes, you must change the keyframe in the middle of a rove across time keyframe.

  It would also help if show you the graphs of reference and tell us what size you are animating. I'm guessing that's not position. Actually I have no idea what you are trying to do, or even if you try to change the graphic speed because we don't see enough of your graphics editor. Show us something like this: