HP PROBOOK 430 G1

PLEASE HELP NEED BIOS PASSWORD

The laptop provides a lock code?

If that's the case, then post it here.

Tags: Notebooks

Similar Questions

  • which driver to download for my hp probook 430 g1?

    which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download?

    I have a mediatek mt7630e

    Hello

    Yes, you are right, you said. I'm sorry for the lack.

    I see that there are two versions of the driver that can be used for your card Mediatek and it's the most recent:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5379212 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_122653_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    MediaTek and Ralink companies are now one after their merger.

    Please support me by clicking on the star of congratulations, if you like my post and "Accept as Solution" if my advice were answered or helped your situation. What are the best ways in which you can thank me.

    I am an employee of HP.

  • HP ProBook 430 G3: USB recovery enough?

    Hello!

    I have a HP ProBook 430 G3 with Windows 7. I think install Ubuntu LTS 16.04 and wipe the drive completely in the process, including the recovery partition. If I for some reason any later wanting to 'factory reset' laptop / reinstall Windows 7, a USB key with recovery media will be sufficient to insert and boot from?

    My thoughts are to use "Create recovery media" in "HP Recovery Manager' to create the USB said. Is it enough to get the laptop to factory condition?

    Any help is appreciated!

    Hello:

    Yes, it's normal procedure to recover the PC when there is no recovery partition, or you replace the hard drive.

    You can also order HP recovery media if the recovery USB disk that you create does not work.

    In the USA/Canada the number to dial is: 1-800-334-5144.

    Have the serial number of the PC handy to give to the customer service rep.

    If your laptop is still under warranty, HP can send you free of charge for you recovery disks, then you can just see if you can order a set for free while you can.

  • ProBook 430 G2: Cannot dowload for Probook 430 G2 drivers

    Hello

    I try to download the drivers for my HP Probook 430 G2 in recent days, as two fingers on the trackpad scrolling does not work. However, Web sites with drivers are not available. For example, http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943803 does not work.

    Any help would be appreciated.

    Best, Marjolein

    marjoleinf

    I just tried this link to HP Web site and it works.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • ProBook 430 G2, touchpad pointer freezes randomly

    Product: Probook 430 G2

    System: WIN7 pro. 64 bit

    Dear HP

    I bought a probook 2 weeks ago and the touchpad randomly freeze when I use my laptop

    I tried the synaptics driver version 17.0.18.8, 18.1.8.1 and 18.1.15, all versions have the same problem

    Sometimes the cursor freeze, sometimes the cursor moving around and out of control

    Sometimes the touchpad detect I multitouch even when I'm only using one finger

    is it possible a HW fault? or just a driver problem?

    any suggestion to solve this problem?

    Thank you

    Looks like a hardware problem, but you can try to use the touchpad in safe mode (to enter use key F8 safe mode) and check if it works fine, if you encounter the same problem in safe mode then it's a hardware problem and in this case I suggest you get the machine.

    Click on "Bravo Star" icon on the left side so resolute.

    I am an employee of HP, but the comments in this forum is of myself and is not HP

  • HP Probook 430 window 8 guard dropped the wireless internet.

    HP Probook 430 E5G98PA appears in the driver database yet.

    Bought a few weeks ago. I tried: turning off power management control, turn off bluetooth and updated the Broadcom driver via the tab of the device driver. (Do not download HP because does not recognize HP probook 430 or the model E5G98PA). He worked for me this time in Germany where he falls the internet every few minutes while the computer beside it works very well. What should I try next?

    Hello

    Try to get the driver fron here and also to run a BIOS update

    http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?sp4ts.Oid=5379212 & AC.admitted = 1379673345783.876444892.199480143

  • HP ProBook 430 G3: HP ProBook 430 G3 and Broadband Mobile HP hs3110

    My laptop is a "HP ProBook 430 G3' (number of product V0R47EC).
    It has a SSD drive in location M2.
    Can I install the module "hs3110 HP Mobile Broadband"?
    In what location?

    Thanks and greetings
    Yorgos.

    Hello

    It's true, and I should also add: WWAN may not work properly for the SSD.

    Kind regards.

  • HP probook 430 g1 with a SSD update

    Hi all.

    I'll be updating my HP Probook 430 G1 with a 512 GB SSD (in fact is 512 HDD with W7 64 professional); Web sites of many factory SSD show the compatibility of their products with my laptop, but Manual HP said that the capacity of the SSD is 128 GB. The cat with the HP support was not helpful. Can someone help me: can I put with 512 gB SDD? I put divers or chipset to AHCI storage level?

    Thank you

    The 128 GB 2.5 inch SSD was just the biggest HP offered to sell the plant. If your laptop has a 2.5-inch SATA drive (some of them operate entirely off small mSATA WSSD readers) then you can replace it with a 2.5 inch SATA SSD of any size on the market. You will not have to pay anything in the BIOS. Your best way to upgrade is to clone the existing for the SSD drive. This should be easy, because they will be very close to the same size. You will need an adapter usb to SATA, but you probably want to get an ayway to continue using the HARD original as external storage drive.

    http://www.Amazon.com/Patuoxun-converter-adapter-cable-drive/DP/B008ASF5MC/ref=sr_1_1?ie=UTF8&QID=1415724695&SR=8-1&keywords=USB+to+SATA

    I use Acronis 2014 Home Edition, but there are several other cloning there, some of them open-source (free). Windows 7 cloning on 2 hard drives of the same size is on the clone easier you will find.

    If you need assistance. Here is the Service Manual:

    Manual

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • ProBook 430: Synaptics imprint wbf stop working if I restart the pc, while it works if I stop and turn

    With the pc starts and fully functional, the installed fingerprint reader work corretly. If I stop the laptop and I reboot, it still works and I can unlock / connection using the fingerprint. If I reboot manually or if the system restarts for example because updates are installed, the fingerprint stop working. So I need to reinstall the driver using the feature "repair driver."

    @mregazzi

    Welcome to the HP Community Forum - we are a community of fans of HP !

    System, one of the three main models:

    "ProBook 430" (12).

    Consider / try a newer driver.

    Download information and Release Notes page:

    Synaptics (validity) of fingerprint driver - 4.5.315.0 Rev.A

    Version: Rev.A 4.5.315.0 (September 17, 2015)

    Improvements

  • HP Probook 430 G2: Audio problem

    I got my new laptop (HP Probook 430 G2) barely 4 days ago and I already had a problem with it.

    I find this question every time, when I try to listen to music etc., headphones or 5.1 speakers (both using 3.5 mm jack).

    When I use Google Chrome or Windows MediaPlayer etc. If I stop to listen for 5 minutes (stop the video), then the audio "dumb"(barre de son dit qu'il n'y a son sort) but nothng can be heard. "." I solved this problem simply by setting the volume level 0 and back where it was in the first place.

    This problem came a bit annoying on a long term, so I hope someone can help me with this problem

    Thanks already

    Problemaster

    Thank you

    Your system uses the older driver

    Your driver page

    For the audio problem uninstall it please the driver Audio Realtek High definition (HD)

    Reset

    Install the new after reboot

    Driver Audio from Realtek High definition (HD) new

    FTP://g4u0180.Houston.HP.com/FTP4/pub/SoftPaq/sp72001-72500/sp72229.exe

    After the update install the new Bios (please disable the internetsecurity for installation of the Bios)

  • Driver for HP Probook 430 G1 to ACPI\HPQ6007 on Windows 7

    Hello

    I'm looking for a driver for the 'unknown device' ACPI\HPQ6007 on HP Probook 430 G1 for Windows 7 64 bit.

    Please send my the druver or the download URL (I did look microsft and update the latest version), but still get the

    "Unknown device".

    Thank you

    Elazar

    Please use the HP 3D DriveGuard 6 software located on the page HP ProBook 430 G1 Notebook PC Drivers, software and Firmware.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • HP Probook 430 G3 (T6P18ES): technical information Probook 430 G3 m2

    Hello

    I buyed a HP probook laptop computer G3 which comes with storage SSD m2. I would change this module because I need more storage. Can I change the M.2 SSD 256Go module (with 520 MB/s read and 270 MB/s write) in M.2 500 GB SSD module (with 2 200 MB/s read and write of 900 MB/s) or not?

    Thanks for the help!

    Hello

    The limit is SATA III 6.0 GB/s • 555 MB/s approx.

    http://www.crucial.com/USA/en/compatible-upgrade-for//ProBook-430-G3

    Crucial MX200 m2 Type 2280 (Single Sided) SSD 500 GB internal CT7929775

    • 500 GB M.2/NGFF (2280) single-sided internal SSD SATA 6.0 GB/s • 555 MB/sec in reading, 500 MB/s write
    • updated for HP - Compaq ProBook 430 G3 system.
  • drivers for HP Probook 430 g1

    Hello

    I recently bought my HP Probook 430 g1 and found no drivers for the following adapters:

    Ethernet controller

    PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C & REV_0C

    PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    PCI Simple communication controller

    PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C & REV_04

    PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C

    PCI\VEN_8086 & DEV_9C3A & CC_078000

    PCI\VEN_8086 & DEV_9C3A & CC_0780

    (USB) universal serial bus controller

    PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C & REV_04

    PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C

    PCI\VEN_8086 & DEV_9C31 & CC_0C0330

    PCI\VEN_8086 & DEV_9C31 & CC_0C03

    Unknown device

    ACPI\HPQ6007

    * HPQ6007

    Thank you

    Friend

    Ethernet controller

    FTP://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63213.exe

    PCI Simple communication controller

    FTP://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67047.exe

    (USB) universal serial bus controller

    FTP://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61820.exe

    Unknown device

    FTP://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64934.exe

  • HP Probook 430 G2 WiFi adapter driver problem

    Hello! It is a message to HP, correct the download pages for this model of laptop (HP probook 430 G2)! I struggled for the last day to try to download the driver for wifi card OK for this laptop that I just bought today.

    The laptop runs on windows 7 ultimate, 64-bit. I tried to contact support via chat, but my model cannot be selected. Any help is greatly appreciated...

    Thank you

    You are the very welcome.

    Yep, it happened quite often lately and the person responsible for keeping this site support better get with the program.

    You can almost set your watch by day, you can expect it to go down and for how long.

    This time he has been down quite awhile, so they have outdone themselves with this foul.

    Maybe there is a scheduled maintenance this weekend.  Here in the hope of a long-term solution!

    In any case this is the driver you need...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137990-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0002

    I think that this card has also a bluetooth radio, so here's the driver for it too...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-139353-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0005

  • HP Probook 430 G1 won't work without charger

    Hello!

    I have a HP Probook 430 G1, which is about 1.5 years old. All of a sudden it won't work without the charger plugged. If I leave the charger, it immediately stops and will not start until I plug it again.

    A few days ago my computer would go hours without charging me.

    My computer detects the battery and it's 97% charged.

    Batterycheck HP said that my battery capasity of 42% of what it had when it was new.

    What is the problem? Do I have to buy a new battery?

    42% of what it was to have should be enough to make him stop not immediately after I unplug the charger.

    It seems that the battery died then. IF you have a bad cell, but others are fully charged, reported its possible to get a full charge. You can't really test it properly with the adapter plugged.

    IF Windows is record that the battery in the tool bar, can you draw everything plugged and it shows that the battery is out? IF Yes, then you know that the mobo circuitry does its job.

    If I understand correctly, is not a good idea to fully charge a battery at 100%, nor let him down until the laptop shut. You can set this in your Bios does not load 100%.

    You can do this if you get a new battery.

    Just my 2 cents.

    It will be useful.

  • ProBook 430 m2 (NGFF) SSD

    I recently bought a HP probook 430 G1 mobile.

    It came with a standard 500 GB 5400 RPM HARD drive. I want to improve it with an SSD.
    Obviously, I have the standard option of a SSD 2.5 ", but I know that this laptop has an empty slot, which should be a slot m2, according to its manual. Also, I know that one of the options when buying is to buy it with a 120 GB SSD m2.
    If so, I suppose that it is possible to buy a drive for m2.
    However I have a little fear that it won't work. Do guys experience with this notebook with SSD of m2 and can say with certainty that this option works?

    Thank you!

    Not the m2 and the WWAN are different slots. WWAN is a single purpose can only be used for the WAN card.

    The crack, I see in the manual, but without giving explanation lies directly above (towards the screen of) SATA hard drive Bay. If she's not here, it is on the motherboard.

    I'd say having a boot for a mSATA option must mean the m2 slot and it would mean you can use it as main boot drive and still have a regular SATA drive for storage.

Maybe you are looking for

  • How to install a different language version of Windows?

    Hello I have the Pavilion dv7-4142eo bought and with the help of the Sweden. This laptop have installed Windows 7 Swedish. Now, I want to give this laptop of my father who is living in Poland and the Polish language, so I have to install Windows Poli

  • I want to install two cams hd2200 on one machine

    I have two webcams hd2200 I want on a single machine. The drivers do not seem to stay when two cams exist. Suggestions?

  • Profile of user login

    trying to connect to my user profile and it says "user profile service service failed to connect, the user profile cannot be loaded."

  • Not have access to the DGM or Web Console Aironet 1142n

    Hello I have Cisco Aironet 1142n. I have currently no access to the config t to set up interfaces or the web console. I found this article on the fact that my version of IOS is set incorrectly, but I can not implement telnet to improve the image that

  • Should my friends I upgrade by March 1 or April 1

    HelloI have already updated to 12 c about 6 months ago.But there are a lot of people I work with who will just upgrade to 11g (instead of 12).They have until March 1 or April 1?Roger