HP ps 5520 eprint configuration which router configuration is necessary?

Similar Questions

• Compaq Pressario v3300: pressario laptop computer v3300 is not says booting configuration setting necessary.

  Hello friends,

  My old computer laptop pressario laptop computer v3300 is not says booting configuration setting necessary. CD rom is not working is there medium to transfer its data to new laptop with OS 8.1

  concerning

  Hi there @Kwatra_ps

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are looking for a way to transfer data from your old laptop to another. I'm happy to help you.

  Take a look at the following pages for some methods that you can try.

  How to transfer data between two hard drives - weecast.fr

  How to recover data from the hard drive to a laptop Dead - weecast.fr

  Assuming that your hard drive is readable, you must find a compatible external drive bay for your laptop hard drive. Remove the disc and install it in the Bay, then you can use it as an external drive and then copy data to it at your leisure.

  Another question, you will probably encounter is file permissions if the old drive is attached to another windows device. See the following, the same principles also apply to Windows XP.

  How to understand these 7 confused files/Windows share permissions

  I hope this helps.

• WAP54G Repeater, which router mode?

  I have two WAP54G that I used to set that repeaters, but then I had to change my router to a WRT120N... But then I discovered only works with WRT54G Repeater mode, so I had to buy another.
  I bought a WRT54GH.

  I was not able to repeat the operation successfully with this router.   This is what happens to be WRT54GH will not be repeated like the WRT54G? So which router do I need?  If I didn't change my router, how to repeat the signal?

  Thank you.

  Yes. You can use WAP54G and connect directly to the modem to provide a wireless connection. Then, try to repeat the WAP54G signal rather than the signal from WRT54GH. I think WAP54G can repeat if connected with WAP54G wireless signals.

• Which router is the most stable and the most suitable?

  Hello

  I have a Linksys Switch (Gigabit) connected to various materials in my small business via CAT7.  Everything turns end network; wait in line ISDN BRI, which currently gives me only 12 Mbps download.  I also connect the router to a VOIP to ISDN gateway which i sconnected to my internal PBX which I assume provides a load on the router.

  Unfortunately my RVS4000 (firmware v1.3.2.0) simply keeps now hung and I spent a lot of time trying to understand why and I'm close to simply replace the router (as the loss of time is less than the cost of a new device).

  Please can someone advise a suitable router with a firewall, which is VERY stable (+ 99.9% time)?  I want to stay in the world of cisco/linksys here I first looks for a solution.

  Thanks a lot for your suggestions of experts.  If someone is overjoyed with their router then please let me know.

  BTW - I have no Wifi as the router is in a small data center with Wifi does simply not apart of as the walls are 60cm thick.  A wired router is sufficient.

  Best regards

  Mark

  I would go for 890 series router has just begun.

• HP Photosmart 5520: EPrint and uable to connect to the aol mail server

  I have an Android device and that you have downloaded HP eprint. It works fine for printing photos and other documents, but I can't connect to AOL mail.

  I read the other posts and tried to change the hostname to "[email protected]", I am using IMAP port 993 and participate in my e-mail address and password that I know are correct. I checked the SSL box to use.

  The only entry that I wasn't sure of is the 'Description' field, because there is no indication on what to put here. Is how important it that are trying to connect unless something is entered here? I just typed "AOL."

  Please help as this is driving me crazy and spent a few hours looking at this.

  Thank you

  Hi Nickb2202,

  That's what you said "Hostname - [email protected] (used)" take the sign @ out and have her take a. Instead, then volia will fix your problem.

  Yours faithfully,

  Ryan

• Which router to < 10 users?

  Hi all

  I was wondering what would be the best IOS router for remote sites with fewer than 10 users?

  Our remote sites need to connect to the central site 1 (star topology +) and at the moment we have about 4 remote sites. Most sites use Comcast Business Service (up to 50down/10up). We do not want to use the SAA, we would rather routers with integrated services.

  We want to connect all via the L2L IPSEC Tunnels and all spoke to communicate fully, but also with the VPN Clients. Our current Hub is a dry ASA5505 +, but we can be out in the near future for a Cisco 2901 router. We are looking for rock solid reliability, so if it's never going to the internet, the VPN will be arrived upward when the internet is back (a problem that we had in the past).

  I need as much as possible suggestions for our routers to Remote Site, so we can look over the options for the needs of our network!

  Thanks in advance!

  L2TP and IPSec is bread and butter for Cisco.  All you have to remember that for IPSec works, you must download the IOS that will allow encryption.  Also you also have an option as to the amount of DRAM desired.  It is preferable, in my view, to charge the maximum amount of DRAM to a router.

  You can get the router of 1900 but this, in my view, would be an overdose.

• If I go to a website and it Add on of States necessary. How can I find out which add on is necessary

  If I visit the following website http://www.cannonclevelandfunerals.com on my Samsung Galaxy 10.1
  Tablet of the part with the States of photo to an add-on and the portion of the screen with photos
  is empty. How will I know which add-on is required. I added the HTML5 module, and many who have to make the video, but not luck. It still does not work. If I look at the site on my computer, everything is OK. I also installed on my mobile firefox browser to fake.
  Thank you

  SHAKYNOT

  I tried to download, works of nothi, g

• Tecra S5: Which driver Lan Wireless necessary

  Hello

  I have an S5 and receive information from a wireless Lan driver. Excellent service.

  But what is used? I follow the link for downloads and offers me different drivers. So I try to establish that you choose and that's where my problem begins. On the page "Downloads wireless LAN How - to's" I get the instructions for Windows XP and 2000 - but not Vista.

  Using common sense I go to control panel and open the Device Manager. When I click on network adapters, I see a wireless WiFi link. But not of adapters that match the numbers in the downloads.

  What I am doing wrong and how can I make sure I have the correct update?

  Oh, now I installed Toshiba Tempro, but it is only to tell me my disc fill level.

  Thanks for the help.

  AndyB

  Generally, all the latest WLan drivers are on the Toshiba WLan portal.
  http://APS2.toshiba-tro.de/WLAN/

  As you have already posted, you can check your WLan card details in the Manager of devices-> network adapters.
  Should there have listed the LAN and the wireless network card.

  Choose the WLan card and access the properties where you can find more information on the WLan card.

  Good bye

• Scroller which appears only when necessary?

  Hello

  I wish that scroll bars appear when the browser is smaller that the 'page' application, but do not appear otherwise.  Currently, I can't get the s:Scroller you should see when I put the scrolling height and width to the size of the container.  Then, when I resize the browser to more small as the size of the container, the scroll bars disappear when I need it most. At this stage the Styll is not useful and more of a hindrance.

  Any suggestions?

  Thank you.

  http://butterfliesandbugs.WordPress.com/2009/03/13/how-to-add-a-ScrollBar-to-a-gumbo-appli cation.

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.

• AT & T U-Verse Configuration Code

  I recently had a program for my business forward port when we came across a big bump with our new router from apple. U verse often requires a 10-digit key to set up and implement an IP port.

  I TRIED THE FOLLOWING THINGS

  -J' used the password, admin, default, public and private

  -J' tried my WP address and shared password wifi

  Here is the screen explaining the instructions

  (This is the screen of "reset" explaining what would be the password)

  Computer: mid-2011 to iMac 21.5 inch

  Router: Airport Extreme (tour) (directly connected to the computer with the ethernet cable)

  ALL OTHER ROUTERS HAVE AS SHOWN IN THIS ILLUSTRATION:

  

  AirPort Extreme would have been put in place to work with ATT Uverse bridge bridge mode. In Bridge Mode, all ports are open, so no additional configuration is necessary on the AirPort Extreme at all.

  I checked again, but did not find a question in your message.  If you have questions about AirPort Extreme, what would it be?

  If you try to configure the ATT gateway, it would be a good idea to connect your computer directly to one of the <>- on the U-verse product LAN ports.

• Configure on ASA5520 SSLVPN

  I have a Version of 5520 6, configure sslvpn on that, but I can't find instructions for version 6. Everything is version 5 or greater.

  Is there anything out there for this version?

  You can use the same examples under 5.x to version 6.x, go to this link ssl vpn web topic, that's all there is.

  Web/VPN SSL VPN

  http://www.Cisco.com/en/us/products/ps6120/prod_configuration_examples_list.html

• Configuring user and group LDAP in application of the ADF

  Hi all
  
  I have to use LDAP user and groups in my ADF application. I have configured the LDAP Protocol on WLS Server successfully and you can see all users/groups under the tab "users and groups". I added the role of business in jazn-"Data.xml" corresponding on behalf of the groups. Created the Application role in jazn-"Data.xml" and assigned a business role role.
  
  However, not added any user in jazn-"Data.xml". Which I do not necessary because it will be taken from LDAP.
  
  Now how to set up the JDeveloper for use these users? What changes must make jazn-"Data.xml"? or jps-file config.xml / web.xml / weblogic application. XML
  
  Did I miss nay configuration step. I just ADF security set in place the tutorial step by step - quick - question but not found it useful
  
  I use JDeveloper 11.1.1.5.
  
  Thanking you in advance.
  
  Mukesh.

  Hello
  So, these are the steps:
  1. create an application role and the role of the company in the jazndata file
  2. map of the application role business role.
  3 the provider in the default domain also create sufficient brand
  4. change the default identity provider and set it as sufficient.
  5. start the application and connect using the enterprise user who has group companies are assigned.

  Here are the steps...

• ePrint still listed as offline on laptop when you try to print work but printer D110a

  I literally tried everything to resolve the question in the title. I'm fine with the networking. I'll run down the list of things that I tried to solve this problem, or the important factors that someone would need to know to help me:

  • It's my work, laptop which I use at home
  • I am running 64-bit Windows 7 Professional
  • All my wireless devices have Internet access
  • I can print on my printer D110a, but only via the ePrint option, which takes more time, because the packets must be sent via the Internet
  • I removed the D110a of devices and printers; HP ePrint is still listed as a separate device
  • The laptop has a 10/100/1000 Ethernet port
  • My router is a router dual-band running at 2.4 GHz and 5 GHz frequencies
  • I connect using the 2.4 GHz frequency
  • The laptop has a built-in wireless card which can achieve up to 72Mbps access
  • I have a Wireless N adapter, which can connect to my 5 GHz band and up to a connection 300Mbps; I removed the adapter and ensured that I am connected to my 2.4 GHz band
  • Other printer drivers HP for printers that I use at work are installed on my laptop
  • I tried to uninstall and reinstall both complete drivers and base for my D110a, but during the installation, the wizard can find never the printer despite the fact that he obtains the valid IP address (192.168.1.x) private on my 255.255.255.0 network
  • I hid my 2.4 GHz and 5 GHz SSID, the D110a attached to the old, but my 2.4 GHz SSID is hidden is no longer and the D110a shows it is connected with a valid, private IP address that is not in use
  • The printer IP address statically has been highlighted, but I since changed to DHCP
  • I had the MAC address of the filtering enabled for network devices, but I've disabled since
  • I tried to remove the power of the modem, router and printer at the same time, wait a minute or two and then restore power to the modem, router and printer in turn before confirming that, once again, my wireless printer can connect to my network and rent a valid, private IP address that was not in use by another device on my network

  I read that the HP CUE DeviceDiscovery Service could confuse a laptop that is used between a job and a home network, if other HP printers are available on the work network unless the service is disabled when switching between networks. However, given that I'm trying to add the printer D110a from home, I imagine that this service must be enabled and started. He is currently in a State of the road with a manual startup type.

  Oddly, although I can access the Internet from the 2.4 GHz or the 5 GHz band, I can't ping my gateway (192.168.1.1) when I'm logged in without wire, or I can ping some other devices on my network, although I see they are connected in the UI of my wireless router/gateway. The router is connected to a modem, but the router is configured as a DHCP server and assigns IP addresses to devices that are trying to connect to my home network. I think that my modem is on a different subnet, with an internal IP address of 192.168.0.1 not 192.168.1.1, which is the IP address of my router/gateway. Curiously, I ping my router and other devices on my network so I am connected directly to the router via the Ethernet port. I went into the Windows Firewall with advanced security, and I see that echo for IPv4 queries are allowed for any type of interface (wired or wireless), but this only applies to a domain (that is, knitting) network, only. Perhaps a rule should be created to allow applications to echo on a private network (i.e., mine), as well.

  Maybe I should not worry about this, because the solution is just to print on the listed HP ePrint peripheral, but it is ridiculous that I can't print to the D110a locally. Any help to fix this would be greatly appreciated.

  Respectfully,.

  Eric Sternot

  Solved! I already knew how to reset the router, as I did several times, but thank you for your diligence.

  Anyway, after my router wireless network configuration backup, restore and then return to re - enter the data, I noticed a field called 'enable wireless of isolation '. The description on the information page of the router down the right to say read, "If checked, the under this SSID wireless client can only access the internet and it can not access other even wireless clients under the same SSID, Ethernet customers or this device. Other customers can access the wireless client, either. "No wonder I couldn't ping other devices on my network, while my laptop was using wireless, too! I restored the original configuration of my router from the backup file I had created and then connected, box unchecked "enable wireless isolate" and saved my configuration. I could then all connected devices - wired or wireless - ping on my network, including my printer D110a. I could also print on it locally.

  Thanks for your patience to help me solve this problem. I know it sounds dumb, since workaround has been just to print the D110a on the Internet by using the device or the ePrint service, but at least I learned a little more about the configuration of firewall ports and what "isolation wireless" was.