Which router to < 10 users?

Similar Questions

• How numbers an account on my local c drive name which doesnot show in user accounts?

  I have an account name on my local disk c which doesnot show in user accounts in Control Panel but occupies space an di want to remove it

  I have an account name on my local disk c which does not appear in the user accounts in the Control Panel, but occupies space and I want to delete... because it occupies the space when I try to delete it says that access is denied.

  In fact, I reinstalled my windows and it was my previous POS..., but windows is reinstalled, but my POS is not removed and occupies space

  Help, please...

  Hello

  What is the exact location of the user account?

  It is not possible to delete a user account in the C: drive.

  Please send us the screenshot of what looking at you helps us to better understand the issue.

  Reference:

  How i: post a screen shot on this forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Note: The given thread also applies to Windows XP.

• MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  Thank you

  OOPS - I just read the description of the site and realize that this is the wrong forum for my questions.

  I'm sorry.

• WAP54G Repeater, which router mode?

  I have two WAP54G that I used to set that repeaters, but then I had to change my router to a WRT120N... But then I discovered only works with WRT54G Repeater mode, so I had to buy another.
  I bought a WRT54GH.

  I was not able to repeat the operation successfully with this router.   This is what happens to be WRT54GH will not be repeated like the WRT54G? So which router do I need?  If I didn't change my router, how to repeat the signal?

  Thank you.

  Yes. You can use WAP54G and connect directly to the modem to provide a wireless connection. Then, try to repeat the WAP54G signal rather than the signal from WRT54GH. I think WAP54G can repeat if connected with WAP54G wireless signals.

• Gets the expiration of user password, any OOTB/task in IOM which disables / deletes the user automatically.

  In IOM after expiration of the user password gets after certain number of days, is there any task/project OOTB in IOM which disables / deletes the user automatically.

  Thank you

  We had to write our own task to disable the user after than XX days since

  password expiration (r2ps2)

• ASA does not propagate any routes for VPN users

  Good afternoon

  I m a problem concerning the spread of the roads to authenticated VPN users through the asa tunnel-group.

  I have a VPN-users-pool where my users receive their IP address, and after authentication and the tunnel is established the idea is that the user get to the networks defined in the following ACL:

  access-list within the standard allow 10.1.0.0 255.255.0.0

  access-list within the standard allow 192.168.15.0 255.255.224.0

  Now, the problem is that, after the tunnel is set up the only way, that the user receives is the default route (which is not supposed to be sent). The user does not receive the roads specified in the ACL list above. It has not received the network mask and assumes one 8 netmask (given that the pool of network from where it receives the IP address is a class A network).

  Network routing works as expected (when I add the static routes directly to PC users, everything works OK). It s just the matter of the ASA do not spread the roads as it should.

  Here is my split tunneling settings:

  attributes of Group Policy DefaultRAGroup

  VPN-idle-timeout 1

  Protocol-tunnel-VPN l2tp ipsec

  disable the PFS

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  attributes of Group Policy DfltGrpPolicy

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  Any ideas?

  I have apreciate your help

  Best regards

  Just a question, I see:

  attributes of Group Policy DefaultRAGroup

  Protocol-tunnel-VPN l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  internal DefaultRAGroup_1 group strategy

  attributes of Group Policy DefaultRAGroup_1

  Split-tunnel-policy tunnelspecified

  It looks like your policy

  DefaultRAGroup_1 you set ACLs and the other doesn't seem to be for L2TP/IPSEC. How do you connect to the ASA, using L2TP/IPSEC or Cisco IPSEC client? In addition, if your users are devoted to this group policy:

  DefaultRAGroup_1 it looks like the acl is missing for the split tunneling

• Unable to connect to Homegroup Windows 7 between the Modem to the PC and the Modem to the router for PC users.

  I want to talk about WIRED computers, do not speak of wireless.

  I have 3 PC:

  -2 are connected via Modem directly to the PC.

  -1 is connected through router, and the router is connected to the modem.

  The problem, this is it, it cannot detect the homegroup that I created on the computer that is directly connected by modem.

  The 2 PC via modem are perfectly detected and connected to the homegroup, so I want to know what I would do to another PC (which is connected to the router via modem) detects the homegroup, I had already created?

  Help, please.

  A Modem can have only two ports, connect to the internet (Wide Area Network) and the second to a SINGLE local device. In most cases the internet Service Pwill provide with only an IP address so itself cannot connect to more than one at a time. In current solutions, it is very rare for a Modem to use. If as you say, you have several devices connected to this unit then he himself is a router but possibly with the Modem built in if you have ADSL ISP.

  If your second unit is also a router then that explains why you cannot connect all devices in the same residential group.

  Router 1 has created a Local Area Network including both PC and the WAN port on the Router 2. Router 2 has created another independent local network with the 3rd PC. It is very likely that the two local networks will be IPv4 and traffic can be routed between them correctly in both directions according to the two local networks subnet ranges.

  Even if they are properly configured to allow traffic that HomeGroup requires IPv6 that some home routers support fully and every Member of the residential group must be on the same LAN anyway, he will not support a routed connection.

  Remove the 3rd PC of the 2nd router and plug it into the direct 1 router, remove the router 2nd the 1st in order to free the port. 3 all PCs are now on the same local network and communicate both IPv4 and IPv6, and homegroup should work.

  If you need additional ports provided by the 2nd router for other devices is not part of this problem then consider replacing it with a switch. If you use Router 2 for other devices Wi - Fi irrelevant then you need a wireless access Point.

• Which router is the most stable and the most suitable?

  Hello

  I have a Linksys Switch (Gigabit) connected to various materials in my small business via CAT7.  Everything turns end network; wait in line ISDN BRI, which currently gives me only 12 Mbps download.  I also connect the router to a VOIP to ISDN gateway which i sconnected to my internal PBX which I assume provides a load on the router.

  Unfortunately my RVS4000 (firmware v1.3.2.0) simply keeps now hung and I spent a lot of time trying to understand why and I'm close to simply replace the router (as the loss of time is less than the cost of a new device).

  Please can someone advise a suitable router with a firewall, which is VERY stable (+ 99.9% time)?  I want to stay in the world of cisco/linksys here I first looks for a solution.

  Thanks a lot for your suggestions of experts.  If someone is overjoyed with their router then please let me know.

  BTW - I have no Wifi as the router is in a small data center with Wifi does simply not apart of as the walls are 60cm thick.  A wired router is sufficient.

  Best regards

  Mark

  I would go for 890 series router has just begun.

• Create a button to insert an image in a pdf form which disappears once the user hits, a form submission or form reset button?

  I am updating a form of company which was created in Livecycle Designer, by a user who has left the company, which has an image button to join.  The Acrobat of the company bought dc pro for me, thinking that I would be able to update the form, but it is not able to be edited, and I therefore re-created form in ms pro.

  I can get the user to insert an image PDF using javascript

  event.target.buttonImportIcon ();

  However not being is not familiar with javascript and still learn acrobat, it's that I can get in the previous forums before I lose myself.

  The javascript works fine to get the image, however is not immediately clear the reset form or submit buttons for forms are used.

  Can someone please give me simple and clear instructions on how to do it?

  P.S. Adobe website does not mention anything not being able to edit livecycle designer forms in other versions of acrobat, so I'm already very frustrated.  So please do replies newby friendly.

  You cannot delete directly. What you can do is a kind of a hack, which is to copy the icon of a button that has not applied to icon.

  If you create an image button (it can be hidden), set it to an icon, but don't actually select one.

  When you want to reset your other button, you can use this code:

  this.getField("Image1").buttonSetIcon (this.getField("EmptyImage").buttonGetIcon ());

• Conditional routing based on user or node access group

  We have a requirement to send a DRG application to a specific approver based on the issuing user or group access to the node of the issuer.  Is it possible to refer to the Group of access user or node in a formula derived from property or the validation that I could use in conditional routing in 11.1.2.4?

  I recently discovered the function UserName().  I have built a hierarchy of users DRG and can use the function UserName() to tie in to the values to use in a conditional routing based on the current user.

• other products EMP which runs under the user who installs the product

  Hello

  We have an EMP 11.1.2.1 installation on which we decided to install the Calc Manager. This server has Foundation, logic of web, planning and Reporting and analysis components. Then we reconfigured Workspace, GestionnaireCalc, and Shared Services.

  Initially our process would run under the SYSTEM account even if I start using my ID. After reconfigure it, the process of Foundation and GestionnaireCalc run aunder the user to launch the process. Rest of the process as planning still run under the system account. So when disconnect us from the Foundation and treated GestionnaireCalc gets killed.

  Also, in the task manager the name of the process not appears as java.exe instead of HyS9FoundationServices

  After looking around a bit, I found differences in the .properties file.

  New file after reconfig .properties:

  context = workspace

  interval = 5000

  validation. Context = Workspace/Status

  Checker = foundation

  Server.Name = FoundationServices0

  wait = true

  Domain.Location=E\:\\Oracle\\Middleware\\user_projects\\domains\\EPMSystem

  Server.port = 28080

  type = j2ee

  Timeout = 500000

  Softly.Depends = OHS

  * the host and admin url entries deleted

  Previous configuration file:

  name = HyS9FoundationServices

  context = workspace

  interval = 5000

  validation. Context = Workspace/Status

  Checker = foundation

  Server.Name = FoundationServices0

  wait = true

  Server.port = 28080

  type = service

  Timeout = 500000

  Softly.Depends = OHS

  * the host and admin url entries deleted

  Might help with any suggestions or pointers? Thank you.

  Kind regards

  Savio

  Seems you have deselected "Create Windows Services for configured components" under "Hyperion Foundation" > "configure common settings."

  Re-run Setup, select "Configure common settings" and "Deploy to the application server" under "Hyperion Foundation" and all the other web apps that have had the Starter changed properties, select "Create Windows Services for the configured components" and deploy web applications.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• HP ps 5520 eprint configuration which router configuration is necessary?

  I need to configure on my ps hp eprint 5520, but it cannot download the firmware. The printer is properly installed via radio one by one 192.168.xxx.xxx local/static ip, dns is the high 8.8.8.8 and 8.8.4.4. the computer is on the same local area network and 7 64 home. the router is netgear dg 834. I tried to install the printer in the demilitarized zone, I tried to inbound and outbound on port 80 to 5347 and authorized installation service.  THERE IS NO WAY TO INSTALL EPRINT.

  Thanks for advantage

  Problem is actively debated the post below.

  Photosmart HP 5520. First installation cannot start configuration eprint. Could not be updated

• Old access portable hard drive which had the windows user password

  My old laptop's motherboard is fried.  I took the hard drive and put in the case of the speaker.  want to access the files on the old hard drive but it was password protected.  How can I get rid of this password or be able to access the hard disk?  Thank you

  You can't install a program on the old hard drive to the new hard drive and expect it to work. You must install the program on your new computer and open the data from there. It does not matter that the old installation of Windows has been protected by. It also does not matter if you have UAC enabled for the old installation of Windows or not. The only place it's important is the new installation of Windows which you are working. If you still do not have the data , you need - not the programs - within your new installation of Windows, start the new computer with a Live Linux CD (Knoppix or Ubuntu) and copy the data to your new hard drive. Linux will not honor Windows permissions.

  If you still cannot understand this, consider the computer and the drive to a local professional reputable (not a type of BigComputerStore/GeekSquad of the place). They will be able to get your data easily.

  MS - MVP - Elephant Boy computers - don't panic!

• which detects that the user has changed the clock of the device?

  Hi all my application dependent on the clock time in the device settings. who can my application to detect if the user has replaced the unit time? Thank you

  Salvation;

  It's the Question2:

  and I found the solution:

  bps_initialize();
  Subscribe (clock_get_domain ());
  clock_request_events (0);

  void ApplicationUI::event(bps_event_t *event) {}
  unsigned int dcode = bps_event_get_domain (event);
  If (dcode is {clock_get_domain()})
  unsigned int code = bps_event_get_code (event);
  if(code == CLOCK_INFO) {}
  Q_EMIT dateorclockuserChanged(); signal function qml
  }

  }
  }

  Thanks a lot for your help

• How to know which mode (landscape/portrait) user is in

  How can you tell / changing your screen settings in html5/webworks if the user changes the orientation of the device?

  You can use the object and the window.orientation of JavaScript orientationchange event.  Here's a demo:

  http://BlackBerry.github.com/WebWorks-samples/kitchenSink/HTML/browser/orientation.html

  You can also use CSS3 media queries, define styles for portrait and landscape.  Here's a demo of it too:

  http://BlackBerry.github.com/WebWorks-samples/kitchenSink/HTML/CSS3/mediaquery.html