HP psc 2175 copy

Similar Questions

• When printing/copying pages come out white on hp psc 2175

  When I print or copy printer treats a page like it's printing, but the pages are blank.  The ink cartridges are new and the print head (?) goes on the page, as it is printing.  The printer is an hp psc 2175 and I use windows 7.  The last thing I did on this printer, before it would not print/copy was to scan several documents by using Windows Live Photo Gallery, and that analyzed correctly.  What can I do to get it to print/copy again?

  Thank you!

  Hello oldprinter01

  Please try the following article, as it can help solve the problem you.

  Printing blank Pages

• PSC 2175 Print gray boxes behind the text

  Recently this HP PSC 2175 printer has been printing gray background behind all the text boxes.  It comes from occurring when printing from Windows, launching a test print to options for control panel of the printer, or clear text copy.  See the examples below.

  I have already been through a gambit of the typical diagnosis and determined that there must be something internal that is false because this behavior occurs even when the computer is not used.  This isn't a matter of dirty heads print or alignment.  The HPPSdr.exe did nothing, but check that the printer works.

  Any suggestion would be appreciated.  Thank you

  Windows Test page

  

  Internal Test page

  

  Hello LB.

  I sent a PM, let me know what happens.

• PSC 2175 windows 7 64 bit - stopped printing

  I have a HP PSC 2175 all-in-one printer/scanner/copier. I use a book ultra HP spectrum 13 w / Win7 Pro, SP1. Windows says that the driver does not work, printing to port USB001 (virtual printer port) the printer used to work fine, then it stopped. I suspect a windows update broke the driver somewhere, but because the driver is now provided with the operating system I can not uninstall and reinstall. All I can do is remove the printer and then add again, that did not work.

  The symptoms that are a few lines when printing from Word or PDF can print huge print through from top or bottom of the page, and a bunch of blank pages spit. Using HP print and Scan it says doctor through the correction of errors, but the test page spits out 2 blank pages. Windows test print spits out 3 pages, 2 white and the other with a single line in huge letters in the upper part. Printing a test print notebook product also 2 blank pages.

  Now even devices and printers in Control Panel does not respond. I submit this, I guess I'll restart. If anyone has any suggestions I would be grateful.

  Thank you

  Hi Rainbow-

  I ran the HP print and scan doctor a bunch of times in the past, in fact. All he could tell me was to reinstall the printer, who, of course, I can't really because the pilot is now in the operating system. After several attempts to remove the printer and reinstall USB cable, nothing seems to have worked.

  Until last night! I had scanned a bunch of pages last night - I had not scanned nothing since the printing problem began. Now, the printer works fine. It must have been a few old cruft somewhere in the communication link that performs a work of analysis seems to have cleared.

  I can't say that the scanning was difficult, but I can't say that it wasn't to be.

  Problem solved, thank you for all your help and attention - you kept I'm working on the problem, until it fixes itself!

  see you soon,

  Joe

• PSC 2175

  Just replaced windows XP with Windows 7 OS.  My daughter gave me a PSC 2175 to replace a scanner 2200c is not working with windows 7. Unfortunately I can't find the installation software CD.  Connect the printer to a USB port and installed.  OK, OK copy printing.  When I press the scan button, select wordpad, and then start the display shows "scan to wordpad", but nohing occurs. After a certain time "no connection, installing the hp software.  Any suggestions

  Hi grufty29and welcome to the Forums of HP.

  I see that you have problems with scanning.  Due to the age of this printer, there is no HP software for this operating system.

  I recommend later in this document on the installation of the printer software in Windows 7 for wired USB, especially the section on "how to scan with a driver in the OS?

  This should help you to analyze the use of the Windows driver.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums.

• HP psc 2175 all-in-one 'internal unexpected error"msg when I try to scan

  I've uninstalled and reinstalled the driver three times as well as restarting the program and my PC and I still have this error. I get the error no matter what program, I am trying to scan to.  However, I can copy documents so the scanner works - it just won't ommunicate to other software programs.

  When I ran the HP print and Scan doctor, I was instructed that the driver is unable to communicate with the product, but this has not been resolved by uninstalling & reinstall the driver such as already mentioned.

  He said also the "Twain" component may be damaged and a problem was found with the HP Digital Imaging Monitor.  Still, the uninstalling/reinstalling does not fix this problem.

  Help!

  Hello, SEF,

  You can try the steps of a solution in this document:

  http://support.HP.com/us-en/document/c01162234

  If the problem persists after you perform the steps described in the document, try to scan via printers & faxes if you have Windows XP or devices and printers, if you have Windows 7/8. You can find it via the control panel. Here, you should have an icon for the scanner PSC 2175 (he probably called something like PSC 2170 series).

  Kind regards

  Pontus.

• PSC2175: PSC 2175 does not print on Windows 8.1

  PSC 2175 prints on Windows 8.1. Although it scanner and Windows recognizes that the printer is connected is not in Applications like Internet Explorer and Microsoft Office as an available printer even though it is listed in the hardware and printers. HP Print and Scan doctor says that the software is installed, however if you select "fix print" and says that the complete software solution is not installed. If you select "Make install", it says "Page not found". If you select "Drivers and software" and follow the instructions the software only lists is utility of Diagnostic Tools that expands to be install printer HP for Windows. When it works, it says that the printer drivers may not be loaded correctly. By following the instructions to fix the problem, it of just in a loop back to the original Panel, saying that the drivers do not seem to install correctly and try reinstalling the downlaod and install the wizard.

  Hi @manzagol

  It seems that diagnostic tools take you in circles. I'd be happy to help you, but I'm afraid that there is no feature complete and the software for the PSC 2175 for Windows 8 or 8.1.  Instead, you use a driver in OS. A printer driver is software that lets the computer run the printer.

  I wonder if you can uninstall the driver in the OS and reinstall it again. I wonder if the instructions given in the following link may help you with this; Uninstall, disable, restore and update device drivers in Windows 8 / 7

  I hope this helps.

• PSC 2175 does not feed photo paper along the

  I'm reposting this since it's day of HP experts.

  I'm having a recurring problem with my HP psc 2175 all-in-one. When I insert any sort of thicker paper in it, it prints fine up until the last 4/5 or so of the page. Then it gets stuck and no paper feed send all further. It starts the drop of ink on itself, creating a dark band. When it's over, I have to draw on paper. At the moment I'm having the problem with Kodak Premium Photo Paper. I had the same problem before with card stock. In all cases, I make sure to set the paper type in the Preferences dialog box before you print it. What can I do? This printer is old enough, and I hope that this is not done for!

  Hello AubreyRhea,

  Please check whether your paper meets the requirements of your unit, you can check out HERE. Scroll down to the paper form to see if your paper is supported. Which can help as well use paper HP Advanced, which has a grainy backside and is easier to find the printer. You can also try cleaning the collection of paper rolls if yu can reach with a damp cloth, please make sure that the device is not connected to the power outlet when you do and allowing to dry enough before connecting again.

• HP psc 2175: very slow printing

  We had Windows 7 installed on our office and our HPpsc2175 printer is marked forever to print anything. I just tried to install the other driver Deskjet 450, and it does make a difference. Any other suggestions?

  Thank you.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2175 will print with a removed cartridge, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  If the printer will not print without the two coaches installed, you need to replace the cartridges; I would like to start with black as the most likely to be the cause.

• Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers

  Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers.  Can anyone help?

  In fact, the way to solve the problem was to open devices and printers, click with the right button on the icon of the HP psc 2170 Series and use troubleshooting icon.  Who finds the driver, thank God.  Found this just by chance!

• HP psc 2175 all-in-one not printing blue or yellow

  My trusty and reliable hp psc 2175 all-in-one prints wrong color.  It seems to access information or cyan or yellow and prints only in black (which is light) or magenta.  I changed both cartridges, and that did not help.  He keeps asking me to align the cartridges (which I did several times without success).  Any ideas as to what is happening and how to fix the problem?  Thank you!

  Hi myrl,.

  I understand that you are experiencing some problems get the blue print with your printer Photosmart 5520. I'm sorry to hear this has been a problem, but I'll certainly do my best to help!

  This document has a variety of measures to help get all the colors print for you again. I understand the title is not exactly what you're feeling, but it's the best material for you to follow.

  Hope this helps, have a nice day!

• PSC 2175 continues to try to align the printer

  My PSC 2175 continues to show the press ENTER to align modules MSG after that I did several times. How can I delete it?

  Hello

  Please try to follow these steps to move the alignment error:

  Try to hit the 'options' and then on 'setup' at the same time.

• PSC 2175 printing very slowly

  Hello

  My HP psc 2175 all-in-one suddenly started printing very very slowly.

  No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened.

  Any clue?

  Thnks.

  Hello Soldadoryan, there are a few reasons for this. In simple terms, it could be due to the age of printers and use. Maybe this isn't the case in this case, however.

  Power supply from the printer is connected directly to a wall or connected by a surge protector? Visitors are often surprised the difference in performance when they connect the power supply directly into a wall socket because our printers have built in surge protector.

  After to change that, I would recommend checking and updating the firmware of the printer if necessary. The document here will guide you through this just to solve this problem.

  I hope this helps!

• Cannot print except in Wordpad with psc 2175

  More than a week ago my psc 2175 suddenly stopped printing. It would sound as if he was going to print but run white sheets of paper through.  I ran the troubleshooting, and he checks well and prints a test page fine. I disconnected and reconnected both the power cable and the USB cable to the printer and the computer. I was advised to uninstall and reinstall, but the installation disk is 2.1.0 and is only supported for XP and I have Windows 7 (64). I'm quite a Luddite that the idea to do that scares me to death. Any help will be greatly appreciated.

  I have uninstalled and reinstalled my printer and everything works fine now. Thanks for all the help!

• What should I do to install HP PSC 2175 on Windows 7 Pro 32 Bit computer brand new?

  Hi all

  New here, but have used HP printers for eons.

  I just 'retired' my old Win XP computer which was attached my printer PSC 2175 and works very well. I am now set up my brand new win 7 Pro 32 Bit computer and I was wondering what I should do first steps.

  1. I have to install the CD printing software and follow the on-screen instructions?

  2. then, I should go to the HP website and download all the up-to-date drivers I need?

  I bought the printer in 2006 and the "cheat sheet" included for installation only mentions computers running up to XP. But I understand that this printer is compatible with Win 7 and since it runs like a dream, I don't want to buy a new printer, if I did not really.

  Thanks for all your help in advance

  Barb

  @fritzmom, Sorry so late for your response. You will need to configure your printer first hardware. Install the ink cartridges and leave the initialization process.

  When the printer is on the main screen, then you can download the drivers from the Web site or the installation CD.

  Either way is fine. If you want to download the latest drivers, simply go to the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=90809&task=&

  @2of4, all you have to do is re - download by connecting the USB cable. Here is a link that may help.

  http://support.HP.com/us-en/document/c01796879