HP stream 7 USB for PC connectivity

Similar Questions

• Yet WT8-A-102 - USB for pc connection

  So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet?

  Friendly V

  You n t need any additional driver
  If you want to connect this table to the laptop, you should not use adapters.
  The Tablet supports the micro-USB port.
  Use a cable / USB micro USB to connect the Tablet

• Support USB for ESXi

  Hello community.

  There is very little son on ESX 3.0/3.5 and Console of service support for USB devices, so I won't re-collection of information here.  SC is really version of Red Hat Linux, USB support is incorporated.

  (But not for the Virtual Machine hosts individual granted.)

  My question is about support and USB for ESXi connectivity options.

  ESXi does not have a Service Console based on linux but the implementation of BusyBox OS to help with management of the hyper-visiere tasks, how USB support built-in. Support must certainly be there for bootable USB and also more rack KVM now have USB keyboards.

  Just a question how to go into the options of USB support?  If SC, then I could use commands #mount and #cp... but no SC as shown above, also no space available in most of the cases on local storage.

  Thank you and I will reward points quickly.  Looking for ideas on how to use the USB of ESXi connectiivty options.

  If you want the contents of the disc to be visible from the VI client, Yes, you can use VMFS3 as the file system.  If you want to just level console access to the contents of the device (for example a "not supported" or "Not supported SSH" connections), you can use VFAT.  The best way to create a filesystem VMFS3 on this is to use storage management in the VI Client.  I tried not to add additional USB drives, so I'm not sure it will work 100%.

  In the CLI, you should be able to look in/dev/disks and see all the disks on the system.  You can use fdisk-l/dev/discs / vmhba32\:0\:0\:0 to see the current map of partition of a disk (in this case, disk0 on vmhba32, which is actually the USB on my ESXi machine).  You should also be able to use fdisk to create a partition (type should be fb) for a new store VMFS.  You can then use vmkfstools to create a file system on the partition that you create - for example: vmkfstools vmfs3 - C/dev/discs / vmhba32\:0\:0\:1.  Be careful with this command, you get the correct HBA, disk and partition number, as wrong could wipe out something important.

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• Windows does not start correctly when some multiple connection for external hard drive USB hubs are connected

  When starting, I have 2 USB hubs that connect to multiple external HD.

  If I disconnect the hubs, windows always starts very well.

  If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.

  Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?

  Any clue?

  Hello Patrick,.

  If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).

  Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.

  The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.

  Keep me posted.

  And thanks a lot for this.

  Kind regards

  BearPup

• hp7510 connected by USB for Win 7, "printer failure, 0xc19a0028.» "Stop, then press.

  When I turn the hp7510 installed yesterday, connected by USB for Win 7, I get "printer failure, 0xc19a0028.» "Stop, then press. Same error 6 times. How to fix?

  I turned on the printer, ignored the advice of "The printer failed" message to turn off, then on again. Then, with the sill of printer on, I reinstalled all the ink cartridges. The printer worked.

• Problem with connection usb for Dell Dimension 310 HP 4050

  I have a HP Laserjet 4050.  I bought a Dell dimension 3100 series.  I bought a usb cable to connect the printer.  Since I couldn't find the real on the HP website driver because the printer is interrupted, I downloaded the universal driver what they suggest and plugged into the usb port.  The system says it has recognized the new hardware and I see the doc in the queue, but it prints ever.  Does anyone have any suggestions?  I'm frustrated.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18318&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=6&submit.x=6&lang=en&cc=us

  Above is the link of this universal driver > select the operating system to the link above...

  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475

  I suggest that you contact HP at the above address, or ask their Support Forums:

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Tecra S1: Duplicator USB adsl modem connection port

  Why usb adsl modem connected to the Port Replicator III works only for power and not for the link

  Hello

  What type of adsl do you use and what country you're from!

  What laptop do you have! What kind of operating system is installed? (Recovery or clean installation of MS)

  The USB port works if you do not have port replicator usw?
  What other computers, do they work well with other computers?

  To bye chris

• HP OfficeJet 8740: OfficeJet 8740 loses Scan for computer connection

  HP OfficeJet 8740 loses functionality Scan of the computer and requires a reboot to restore. The 8740 is connected via USB to a docking port that is connected via USB for laptop toa. The laptop doesn't go to sleep.

  "The HP imaging device is not found."

  Extended error information is 8, [(1,0, -1)]

  Hello

  Such a potential doe to a communication problem.

  Try to connect the USB directly to your PC and not via the docking station, restart the PC and follow if you see similar behavior or not.

  If it doesn't happen when you're connected directly I recommend you to check if there might be an update of the firmware available for the docking station, if happen you I suggest trying another USB cable and check for the difference.

• Need Driver USB for Satellite 4090cds

  Hi, I'm new to this forum, I have a laptop 4090CDS, usb drivers are missing, I can not connect a usb device, because it asks for drivers. I searched the download USB section & have also chosen USB in the type of driver selection box, but it is said that there is no download for usb for the 4090CDS. Anyone know where I can find the usb driver for this laptop (laptop has a usb port so I think that the drivers don't exist)? Thanks in advance.

  What operating system do you use?
  Usually it s is not necessary to install the drivers USB 3.
  Windows uses the own USB drivers Microsoft currents.

  Have you installed all the service packs? Your operating system is up to date?

• I need driver Windows XP USB for A1 - 830

  I bought a refurbished Acer Iconia A1-830 with which I am very happy.

  He got in September 2014, but since this is a refurb said guarantee does not cover using the Acer company.

  My problem is I am running Windows XP on my desktop and want a USB driver to connect my Acer Iconia A1-830.

  http://us.Acer.com/AC/en/us/content/drivers shows that

  USB

  Acer

  Driver USB for Windows 7 / 8 / 8.1 (32/64-bit)

  1

  8.5 MB

  17/07/2014

  Where can I get the driver for Windows XP?

  I realize that another option would be to install an FTP server on the Acer Iconia A1-830, but that he would really prefer USB.

  Thank you

  Today I plugged the tablet to Windows XP and I was able to do transfers of tablet to the computer using the default value for Windows XP.

  Apparently, the problem that I had originally was a mouse or a mouse driver that I got rid of. who had also caused problems with the cell phone USB connection.

• Router LinkSys WRT160N V2 does not recognize my USB SMC EZ Connect 11 Mbps Wireless

  I have a Linksys WRT160N V2 router. So far I have correctly connected, using two 'wired' connections, my laptop and the printer. I was able to add two DS, Wii, wireless, another laptop and a PC. The laptop that connected wireless uses the D-Link wireless device and the PC uses an other SMC wireless device. All these things correctly connect through wireless connections. The last PC I tied to conenct uses USB SMC EZ Connect 11 Mbps Wireless. This computer can actually 'see' the Linksys router and this is the SSID. When I try to connect to him, he thinks about it for about 5-10 seconds and then fate and says "Detected wireless networks". Ironically, a neighbor also has a Linksys router. Its protected by WEP, but for some reason, my PC is ready to connect to the Linksys router (has a different SSID), but since I do not know the WEP key (I don't want to actually connect to sound at least) it shows the strength of connection 11 Mbit/s and of course, does not have an IP address. Why my router does not recognize my Wireless Linksys router? I even used the LELA 'Search' application for new devices, and he can't find it, all the while my PC 'sees' the router and fails to connect. Someone knows why? FYI, the PC in question just had XP loaded on it (total reconstruction) and has never been only once on the interent.

  If you have disable wireless security is disabled, and if still you are not connect to your wireless network, then I think you should try upgrading the drivers for your SMC card, once you update the drivers for you adapter after this you can try to connect to your wireless network.

• Auto disable Synaptics Touchpad when USB mouse is connected

  Hello

  Someone at - it an idea how to move again the function "Auto Disable Synaptics Touchpad when USB mouse is connected.  I found an old entry in a forum that referenced changing a setting in the registry hex 33, and implied that this would make the OPTION become visible in the mouse settings in the control panel.  But it just seems to disable the touchpad while. So I guess that Synaptics have changed things since this 'solution' was published in 2009, I think. .

  I have W7 XPS and version 15.3.22.0 for Synaptics Touchpad driver.

  See you soon

  K.

  SOLVED SOLVED SOLVED!

  All - I read through it and many forums and have found no solution. I thought of it on my own, so I'm happy to share with you!

  This solution applies to those who do not have a touchpad disable button F button at the top of your keyboard and have the Synaptics driver which does not show the option to disable the touchpad when the external device is present. This also applies to those where the registry key update does not work (because it didn't for me).

  Here is the solution.

  1. go to the Dell site and get the latest driver for your touchpad. Install it.

  2. Once installed, go into c:\program files\synaptics\syntp in your windows Explorer.

  3. open the program called DellTpad.exe (there is also a DellTouchpad.exe called - do not use this one)

  

  4. Once opened, click on device settings.

  

  5 and here the old box is down! Just click to make it active and it works like a charm.

  

• How can I connect my Cruz Tablet for my connection to the internet the computer?

  Original title: How can I connect to my cruz Tablet

  How can I connect my Tablet cruz for my connection to the internet the computer

  Hello

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the model of the Cruz tablet number?

  2. How do you access Internet for your computer? It is through a wired connection or wireless?

  Follow the steps below:

  a. connect a network cable to the tablet computer if the Tablet has a network card. High-speed modems have an output connection to which you connect the network cable and then connect it to a computer or router.

  b. display wireless networks in network settings options. Select a wireless network, and then click on connect. In the areas of Wi - Fi hotspot, you may need to open a Web page to accept the terms of the license before plugging in.

  c. sign to a computer network or a network mobile broadband. Some tablet computers have connections to data network integrated such as the type that personal digital assistants (PDAS) and the use of cell phones. You need to register for an account with the provider of service associated with the integrated network. Alternatively, you can sign up for broadband wireless services and to access broadband that plugs into a USB port with an adapter.

  For more information, please communicate with the link below:

   

  http://www.velocitymicro.com/SupportPage.php

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• where can I find the usb drivers to connect Rikomagic MK802 to my W7 machine?

  Hei.

  Someone who knows where I can find the usb drivers to connect Rikomagic MK802 to my W7 machine?

  John.

  It does not seem to be designed to run on a PC as it is an Android PC in its own right...

  http://store.cloudsto.com/rikomagic.html

  "This size micro computer can be used easily by simply plug into a TV with a spare HDMI slot and then connect a wireless keyboard/mouse. It allows you to do everything you can do on your PC or tablet like browse the web, check your e-mail, go on facebook, watch HD movies, listen to music and of course much more by installing thousands of apps now available for Android. »