HP Stream: Boot for HP stream order

Similar Questions

• CCTK 2.2.1 does actually change the boot on the 780s order

  CCTK 2.2.1 does actually change the boot on the 780s order

  CCTK.exe bootorder - sequence = embnic - valsetuppwd, usbdev, floppy, CD-ROM, disk hard = % CURRENTBIOSPASSWORD %

  Returns

  bootorder
  DeviceStatus DeviceNumber DeviceType abbreviation DeviceDescription
  -------------------------------------------------------------------------
  Permits 0 Onboard floppy diskette or floppy USB drive
  1 disk hard hdd.1 Onboard SATA Hard Drive led
  6 usbdev of USB device USB device enabled
  Permit 4 CDRom cdrom onboard or USB CD-ROM drive
  5 NIC embnic integrated network controller card enabled
  Helped 2 disk hdd.2 hard drive
  3 hdd.3 of disk hard drive led
  -------------------------------------------------------------------------
  You can use DeviceNumber or abbreviation to set the boot order.
  Example1: cctk bootorder - sequence 1, 2, 3 = - disabledevice = 1 - enabledevice = 2, 3
  Example2: cctk bootorder - sequence = cdrom, hdd.2, hdd.1 - disabledevice = hdd.2 - enabledevice = cdrom, hdd.1
  In file operation, same command can write like bootorder = + cdrom, - hdd.2, + hdd.1

  But in reality does not change the order in BIOS (A13). Same line works on other models.

  Well I eventually disable the devices to boot one by one and found out that my hard drive is actuall hdd.2

  If it works comand running

  • CCTK.exe bootorder - sequence = hdd.2, usbdev, cdrom

  John

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• Is it possible to try the function "send for Signature" before ordering?

  Is it possible to try the function "send for Signature" before ordering?

  Hi daves.

  I'm sorry for the delay in answering your question. You are welcome to download a free trial of 30 days of Acrobat Pro DC, if you want to see how sending the Signature feature. You can download the trial from this page: Download Adobe Acrobat free trial version | Acrobat Pro DC.

  Best,

  Sara

• What is the order of Boot for Dimension B110?

  Im having problems loading discs and someone suggested it might be the boot order in the Bios. Can someone help me figure this out, I have to restart my computer of my records, but it won't do anything. Help, please

  
  

• Toshiba Satellite: loop continuous Boot for windows 10 upgrade

  Hello

  I have a Toshiba Satellite and update of windows 10 a few weeks ago.

  laptop froze power so turned off the coast and now I am in a continuous boot loop.  I made a bootable USB key.  I leave the laptop to drain and was able to do ino the "toshiba configuration utility.  Fromm here, I was able to change the boot order to USB first.

  I'm Tournai on laptop and still get the message:

  "Your pc came across a problem and must restart. We restart it for you.

  Stop the code of NTFS file system.

  even with the USB from I get up for the first menu, then this message appears.  I can't even stop.

  I can't even start in safe mode.

  Help, please.

  How to stop the reboot loop?

  Thank you.

  needhelpj13

  Sorry, but these are the HP forums, not Toshiba forums.

  Many older laptop computers HP does not fare well with the upgrade of Win10, and therefore, we advise people AGAINST doing the upgrade.

  Don't know about Toshiba laptops - you should check out THEIR forums for technical advice.

  Good luck

• VMware VS Dual boot for diferent two OS

  I'm sandbox with Planning, Essbase and HFM on a new machine, that I ordered... The machine is an intel I7 3610QM smart Passmark @ 8442... that has hyperthreading 8 GB of Ram and a 750 GB hard drive. comes with Windows 7
  
  I have not had much luck with the VMware all... I try VMware workstation 9 and other virtual mahcines... with not much luck... then my thought process is to define a dual booting with an operating system - Windows 7 and and other OS for my sandbox by using server 2008r2
  
  every thought
  
  Please notify

  If you know what you are doing then it should be ok.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I'm looking for the third order intercept point

  How to find the point of interception of third order of my iphone 6? There is a sheet with all the technical specifications in relation to the my phone gsm modem. Thank you

  No, Apple does not publish or release this level of technical specifications to the public.  Since the 3rd order intercept is a purely mathematical concept for such low power as a smart phone device, I imagine that these kinds of data are unknown outside of Apple's own engineering group (or Foxconn I guess)?

• Creating a USB boot for el capitan

  Hello together,

  my macbook pro does´t work longer. The monitor during startup is gray and it does´t boot correctly. I wanted to create a USB boot with my mac and followed the instructions on the apple site. I wrote it in the terminal:

  sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume of 16 Volumes/STICKI-applicationpath/Applications/Install\ OS\ El\ Capitan.app X\

  STICKI 16 is the name of the usb key. Then I got the comment, I should check my device twice. It is possible, I have stop my Mac. I have Don t need of such a catastrophe. It s worse enough, that my macbook pro pro is down.

  Now I m uncertained.

  Here my question: do you have someone proceeded as above written successfully? Is there someone who has a good advice for me in this case?

  Sorry for my bad English, I left school 40 years ago.

  Thank´s for the good answers and greetings form Germany.

  Ralf Jacob

  These are the instructions I used:

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

  Ciao.

• iTunes for PC 12: order of the song in the Album?

  I find a problem with recently installed iTunes 12 for PC.

  I have a lot of albums containing several symphonies or concertos. I would like to (movements) songs in each album to play in order. If an album contains 23 Concerto of Mozart followed by Haydn Concerto for 5, I just want to play Mozart Concerto 23 movements 1,2,3, then Haydn Concerto 5 movements 1,2,3, etc..

  Instead of this, recently installed iTunes 12.3.2.35 mix songs: movement 1 Mozart, Haydn 3 movement, movement Mozart 2. I have found no way to disable this option regardless of documentation; in principle, I have shuffle off.

  This problem started with iTunes 12. So, how I can be:

  -Configure iTunes 12 to play songs in the albums in order?

  - or return to iTunes 11 without destroying my my library organization?

  (I have no intention of creating hundreds of playlists to work around this problem, instead, I happen to non-Apple products).

  Activate the menu with Ctrl + B if hidden bar.

  Use the option menu control > Shuffle > Off.

  Use a view of your library which is friendly album, for example the view of songs sorted as Album of the artist, growing.

  If the problem persists, please post a screenshot of an album of problem and the reading order.

  TT2

• Installation of a dual boot for XP on a Vista - XP installation computer forget the SATA drive after restart required #1

  Hello

  I'm trying to set up a dual-boot XPpro on my Vista machine.  I found the instructions detailed at various locations.  I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives.  The score is quite small because I have only use for some applications.

  I have the following problem and I wonder if anyone can help.  The disk and partition is by my SP2 disc, but it's ok that BONE is not used on any other machine.

  I can choose the new partition as the location for the new installation of XP.

  Installation gets to the point where the first reboot is required, then at startup, I'm stuck on the option 'press any key to boot from the CD-ROM.  I assume that the reader is not detected.  If I try to start from scratch, I get the warning that the new partition already has an operating system on it, but I can reformat and move forward, then arrive at the startup problem re.

  There is no XP drivers for my Board, but I can not install them because they are on CD and the only option to load the specific drivers in the first part of install required has a diskette is in the drive, and of course I don't have a floppy drive.

  I then use the Startup Repair in Vista I can't move to the stage where XP is installed in fact correctly.

  Any help very welcome!

  Paul

  Hello

  I made a disc of slipstream with nLite as suggested, my sata drivers included but still could not circumvent this problem.  Installation kept insisting that they had to come from A:

  Rather than taking the box to bits I read from the link posted by Michael Murphy, once again and found the answer of Taydius on 250/1 posts.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-26-1946.html

  Problem solved by installing EasyBCD in Vista, it points to the new partition with the inaccessible XP and reboot and selection, installation on board as usual.

  Dual boot now works fine.

  Thanks for the help!

  Concerning

• HPE - 410t unable to boot for win7

  HPE - 410t running Windows 7

  About a week ago, I was listening to music on iTunes while helping my daughter get ready for her NAP.  Without warning, the computer restarted and the window popped up with the option start options "fix."  I chose this option.  The 'Starting Windows' screen came and stayed for about 5 hours, before decide me that nothing really happening.  I pressed the power button and it stopped.  I turned the computer back and got an error message:

  Windows could not start.  A recent hardware or software change might be the cause.  To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000e

  Info: The boot selection failed because a required device is not accessible.

  I tried to start the recovery option of the system on the partition recovery using F11.  The computer displays "loading windows files" then proceeds to a "starting windows" screen where it remains indefinitely (I have enabled him to spend 12 hours on this screen).  I did a win machine windows recovery disc 7 to a friend, who has the same result as the f11.  I don't have an installation disc, because HP does not understand.

  Any thoughts?  I ran the diagnostics and everything tested ok, so I don't think it's a matter, even if her children of seems that way.  I also used my Hiren's bootCD to begin his Mini Win XP, and I can access all parts of my hard drive in this way, too, which seems to indicate that the HARD disk itself is correct.  It is maybe a problem of record start or something. I would like to run fixmbr and fixboot, but I did find a way to get to a c prompt.

  Any ideas would be appreciated.

  According to specifications, the HP Pavilion Elite HPE - 410 t CTO desktop PC is about 3 years old. Hard drives are more prone to failures now than in the past. About a year or two is that all the much more recent hard drive will last. Anything in three years and you're really lucky.

  For more information regarding the location of the 'SMART Support' in the BIOS option to test the hard drive, see for the Iona motherboard BIOS settings . These tests will be progressively longer;

  (1) verification of the SMART State
  (2) SMART short self-test
  (3) Extended SMART self test (this test can take more than an hour)

  You can also download a 'Linux Live CD' or diagnostic software the manufacturer of hard disk bootable CD to test the drive. This should confirm if the drive is bad.

  Please see "How to install Windows 7 without the disc" Download Windows 7 SP1, create the Windows installation media and install Windows. You can also use this disc to 'fix' an installation of Windows 7. If you are unsuccessful repair or installation of Windows 7 using this disk, your hard drive is likely bad.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Remove the boot for windows 32 sequence

  Hello

  I had windows vista installed on my computer. The both 64 and 32 bit on HDs separate. A few days ago, I just format the hard drive of 32 bits. Now it always tells me when commissioning that 32 bits was damaged. I want it to go.

  My first problem is that I had installed two versions and it starts automatically on the 32-bit version. And I installed everything in the 64-bit version. If I reinstall 32-bit I would like t know how to put 64-bit like windows first when starting.

  I just used the 32-bit version of a material that does not work with 64 bit.

  Thank you Kalle

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-the-default-operating-system-for-startup-multiboot

  Change the default operating system for startup (multiboot)

  If you have more than one operating system installed on your computer, you can choose the one that starts when you turn on your computer. More than one operating system installed on a computer is often called a amultiboot configuration.

  Read the above info.

  http://www.vista4beginners.com/system-configuration-utility

  Look also under Boot in the configuration of the system.

  See you soon.

  Mick Murphy - Microsoft partner

• Dual-boot for DOS and Windows 7.

  I use W7 Home Edition. 2G Ram. 500G hard drive. (tons of room left)

  I just correctly partitioned the hard drive and formatted the small partition in FAT32 so I can use BACK 6.21 as operating system.

  I'm trying to re - create the implementation that I had when I was on XP. Otherwise said, when the machine is booting, a screen appears that gave me the choice of either running in Windows XP or in the BACK. So far i cant even install BACK the machine to the three diskettes BACK 6.21 lights. The BIOS indicates the 3 1/2 "floppy drive is enabled.  The boot sequence has been defined for the floppy drive be the first start and the (No. 1, startup disk) disk is in the drive. Windows 7 boots up just as usual and totally ignores the BACK installation disc. Anyone know what I am doing wrong or that approach I should take. ?

  p.s. I have a spare hard drive I use exclusively for BACK if only I could get BACK installed on it and knew what to do at the BIOS level.

  Sometimes simple solutions are the best :) glad to know what you need to do this.

  Don't forget that starts change according to what operating system drive letters, you can even add a disc of Windows 8 and start to learn that. One of the main things to do is label the disks according to their function as this does not change even when the letters do.

  Please indicate the best answer than the answer.

• HP Pavilion dv6-1140ea. want to make the dual boot for Linux also

  Hello

  I just bought one of these laptops. Is really very nice. I am a software developer and want to ensure that the software I write also works under Linux.

  For this reason, I want to make my system dual boot. That means I'll need to wipe the hard drive and install from scratch.

  I am really disappointed that the laptop came not with Vista disk (s), and that the HP software I want here (assistant wireless and all that is installed to make Vista works with the card reader, lightscribe DVD, etc.) is not simply written on a separate disc.

  So, can someone please tell me the best course of action once the hard drive is to get the Windows partition as it is now with Vista and HP utilities on? I want to get free or very low cost disks that I already paid for this software.

  I really hope that it is not my option to create recovery discs. Therefore, your time! I tried their creation and halfway through the process of verification of DVD 1 drive (about an hour in the process), he said verification had not.

  I'm looking for a simple, fast and cheap way to do.

  Thank you

  PUK.

  You are welcome.

  An alternative or a safety net in case where everything goes as planned. You have a C:\SwSetup folder that contains all your driver/app installation programs. Copy on dvd before making any changes. Use your Dell drive to install Vista, using the license key of the laptop on background to activate. Use your dvd with applications/drivers to complete.