HP Support Assistant upgrade and now do not work

Similar Questions

• OfficeJet L7680 repeat me it is out of paper and now will not work.

  OfficeJet L7680 repeat me it is out of paper and now will not work.

  Is the message of the printer or on the computer. If on the computer you have communication problem check the connection between the computer and the printer.

• The router has been reset and now does not work

  I had problems with my Internet so my husband connection reset everything and now the internet works but isn't the wireless router. We called the company we have internet with and they said its because we reset all default settings and need to change the settings that we had, but we do not know how to do. Can someone please help us, we have a router Linksys WRT160NV3. Thank you.

  Just go to 192.168.1.1 with your wired computer, username admin blank password and reconfigure your router from scratch.

• Qualcomm wireless update and now wireless not work grrrrr

  Today, HP said that it is an important update for my wireless adapter and did an update via the HP Support and now have a red triangle with a! inside her and now my wireless died refuses to find any wireless router and the failure of any attempt to make it work.

  Name of product: notebook PC HP Pavilion g6

  Product number: C6M50EA #ABU

  8.1 Windows 64-bit

  Qualcomm-Atheros Driver Installation Program - Qualcomm-Atheros - 10.0

  Qualcomm Atheros Extensible Wireless LAN device - Qualcomm Atheros Communications, Inc. driver.  -10.0.0.264

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01 hardware ID

  Any ideas how can I fix?

  Thank you for the information. Based on this information, I have a few troubleshooting steps more than I can suggest:

  1. I would like you try ping on your router. Information on how to perform this task are described here: How to Ping the router of network Windows.

  2 take note if there is no packet loss, or if you are able to accomplish this task.

  3. Once this is done, I would like to that use you HP Support Assistant to test the capabilities of this computer network. To do this:

  -Open HP Support Assistant and click on "Internet and security.

  S ' ensure you are on the Internet tab, then click on "HP network Check."

  -It can generate a confirmation screen; Simply click "Next".

  -This diagnosis checks certain conditions and variables. Ultimately, results will be posted. Please take note of any errors and the potential causes (you can click the arrow next to root causes for more information).

  I need this information if the problem is not resolved. As an additional troubleshooting step, I suggest that you perform a system restore. I say this because you said that the problem occurred after an update. For more information about how to perform a system restore, please see this Microsoft Web site: How to refresh, reset or restore your PC

  Please note: a system restore will return the computer to Windows 8. While in Windows 8, all of your Windows updates and install all the necessary drivers (drivers Windows 8 on this computer are found here: drivers PC laptop HP Pavilion g6-2213sa). Please check if the computer can connect to a wireless network at this point.

  Once you have verified this, you can return to the 8.1 Windows computer if you wish. Please provide all your results.

  Mario

• Portal and management console Mirage 4.4.2 upgrading and file do not work

  Hey there

  Don't know what I did. Upgraded to 4.4.2 and now the file Portal is therefore more accessible. Get this page cannot be displayed.

  Worked before I upgraded. Any help appreciated.

  With 4.4.2 presents us the SSL only for the Web management console and file. Therefore, activate the SSL in IIS that see the link below.

  Documentation Centre for the Mirage 4.4 horizon

• I have an error message at the top of my window when I bring HP Support assistant request, and it does not allow me to reload another version without flaws.

  This application never worked properly, I can't change any settings, when I try to run the and click the settings box, it just says: "loading" and it will continue in this fashion until? days. How can I get another newer version and reinstall? the HP Web site?

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. have you made any changes to the computer?

  I suggest you contact HP support and check.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=CP-99271-1

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• HP Officejet 4620: hpeprint used to work and now does not work

  I've registered to use hpeprint for a number of years and it has worked very well, although I don't use it very often. I had the opportunity to use it today and it doesn't seem to work. The printer is wireless and is great for everything else is not a local problem for me. I received an email from HP indicating that the print job has been received in too. Still not printing.

  Thank you very much for your help!

  PS Subsequent investigations said that "I have not all registered devices! Then when I put my claim code in the to add it again, the message says:

  "The request window that has already expired. Click on "what is a claim code?" below for instructions on how to print the fact sheet Web Services for re - activate the code request for 48 hours. »

  that I don't really understand! Sorry for being a thicko!

  Hey @JimRobinBSc,

  Welcome to the Forums of HP Support!

  I see that you have some problems with ePrint on your Officejet 4620 e-all-in-one printer. I can help you with that.

  First, a code of request is a way for HP connected connect a printer to an account. It has no use outside. That said, if the printer does not appear in the devices on the connected HP, this means that we connect the printer again. To do:

  1. On the printer, click the web services button that looks like a tablet with a phone beside her.
  2. If you see an email address click settings, scroll to remove Web Services and press on this subject to be deleted. When finished, click the web services button again.
  3. Press Setup and Yes. The printer should print a new claim code.
  4. Enter the claim code in the place under the devices tab which requires the claim code.

  Please let me know if this allows you to use ePrint or if you have any other questions. If not, have a great week!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• MS Movie Maker exports the Codec error on me and now does not work!

  My Vista's Home Premium Service Pack 1
   
  I was downloading MP4 fortunately making movies with MS Movie Maker then pvooop! MSMM no longer works.
  I just downloaded the WMM 2.6 and that crashes now in the same way.  WHY?
   
  When I try an import with the ASUS media and go to the folder that contains these files .mswmm files are not yet recognised by the Vista Movie Maker as being multimedia files, to see I choose all files. When I try to open them up to this moment there, I get the following error message:
   
  The file C:\Users\Don and Kim\Videos\Africa video Project\Drafts\Welcome Home\Clip 01_1\WH than Clip1.MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.
   
  I tried to find the codecs but was put off by the fact that they were not genuine Microsoft and do not want to download something that will just make things worse.  Why should I have to download the risky codecs when I'm a real MS client?

  This happens to many people. Is there a bug in time in this SW?

  Nick

  Hello

  You try to read the MSWMM file?

  A .mswmm file is not a movie... it's a project file. If you double click the .mswmm file it can open Movie Maker, but unless you have imported all the sources files it will not be usable.

  I recommend you go through the link below which includes a complete description on how to put a DVD into Windows movie maker project.

  How to put DVD into Windows Movie Maker project?
  http://social.msdn.Microsoft.com/forums/en/webgadgetdevelopment/thread/5842c3d0-8ba3-4399-8aa9-e5330eb1a2a9

  Solve problems with publishing a movie to your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Let us know if this helps

  Concerning
  Anthony.

• 33.1.1 updated and now does not work watchespn

  There is a window that opens after selecting the game I want to watch. This window appears.

  Hello

  There are several ways to alter your settings pop up for a site.

  In your Options:

  • Tools (or

    

    ) > Options > content

  • Add an Exception for your site

  You can also:

  • Enter Subject: authorizations in your address bar
  • Select the site you want to allow the pop-up on the left pane
  • Set the "open pop-up windows" to "allow".

  If you are already on the site, you can check the pop up settings in the Information of the Site button:

  • Click the globe or lock on the left side of the address bar (click on "More information" > permissions)
  • Otherwise, go to tools > Page Info > permissions

  See articles the Blocker settings, exceptions and troubleshooting and How do I know if my connection to a Web site is secure? for more information.

• Updated Thunderbird 31.0 invited Lightening upgrade; Lightening now does not work

  The data previous calendar missing, most calendar controls are grey; very painful!

  Looks like you have an incompatible version of Thunderbird and Lightning. Find the matching version of lightning here and install it. Your event data should reappear.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/versions/

• HP Support Assistant - uninstalled and reinstalled - now it does not work!

  My HP Support Assistant stuck on Create Restore Point.   Well, I followed your instructions for which has been published in many other threads and uninstall HP Support Assistant and re-installed, and now it won't do anything.  It opens upward and the button FOLLOWING is not highlighted if I click it nothing happens... it's totally useless now.  What can I do to make it work again?  Help! (see image below - all I can do is minimize, maximize, or close the screen.  FORWARD button does nothing!)

  My computer is only 1 year old and I run Windows 8-64 bit.  Never had a problem with it before, but tried the air upward and it got stuck about to restore, so I followed your instructions, rebooted after UN-installing and uninstall, now, it won't do anything.   I also tried to restore HP Support Assistant of the Recovery Manager and it's always the same: do nothing.  How can I get my updates now?

  I have a HP Pavilion p6 2310.  I have installed Windows 8.1, it is fair to Windows 8.  Thank you.

  Never mind... I fixed it myself.  I did a system restore before I uninstalled and reinstalled HP Support Assistant yesterday and now it works again!

• Assistance to support uninstalled automatically and now cannot install.

  Hi, I'm on an Alienware 17 R3.

  Support assist took me to some driver updates after which help Support was lacking. tried to reinstall support help to no avail. Each facility is the same termination dialog box

  

  Rebooting did not help either. Tried system restore - came to help back Support-, but on opening the program ended by saying incompatible.

  And then tried to install new and even dialog box

  

  Online diagnosis now does not work because after system detects support help don't do not settle.

  I am a frequent user of support help and Bank above strongly. Any help would be much appreciated.

  Hello Akshay,

  1. have you already attempted to reboot the system and then try to delete the folders and files completely? If this is not the case, can you please try to restart the operating system, and as soon as the operating system appears, try to delete the folder.

  2. If the step above does not work can you open the administrator command prompt and run the following command: del /f /s /q /a "C:\". ""

  Some of the files are maintained for a successful uninstall and that is why you are not able to install properly. If the steps above do not work, we will have to use process Explorer tool to identify the process of locking these files. We will look at this later

  Also, can you please confirm if Dell Support help Agent has been correctly uninstalled system?

  Thank you

  Christelle

• I just upgraded to Safari 10 and now can not watch videos on youtube

  I just upgraded to Safari 10 and now can not watch videos on youtube

  If the videos require Flash, you can copy the Chrome URL and watch videos. Chrome has a built in flash player.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.