HP True Vision HD dark
Hello! I have a problem with my webcam, the picture is too dark, and when I go to a config page I change the brightness and other features, but nothing is helping, everyone knows what I need to do? THX
FIX: http://www.youtube.com/watch?v=lquWomWd3d4
Tags: Notebooks
Similar Questions
-
I lost the dark theme of the Firefox developer edition!
Hello
After that I first synchronize Firefox Dev edition I lost the beautiful dark theme and again got the gray bars.
I use Firebug and Web Dev Toolbar.
How could activate the dark theme again? I tried using Customize / theme but no way, I always have everything in gray!
Thanks for your help!
See you soon
Claude
Change these prefs work?
browser.devedition.theme.enabled = true devtools.theme = dark
Might also check:
lightweightThemes.selectedThemeID = [email protected]
-
Lenovo Y510p 755M SLI - bad perfomance | Low FPS
Hello
Background
About a year ago, I bought my Y510p. Initially the laptop seems to work well, but it took me two months to see that the enclosed second of 755M SLI card was not recognized by the system and so I realized that I had played a 755 in two months. So, after some searching on Google, I managed to activate the video card in the execution of a .bat from the lenovo Web site.
The problem
A few months later, I contacted a friend of mine who also bought the same laptop to play BF3 together. I asked him what he played on the settings and he said he's playing on high graphics with 50 to 60 fps. I was completely shocked, since my laptop couldn't do 50 over low heat. I went back to google and discovered others could play much much better too, I had been googling and reach your forums and others to find a solution, without result. So I decided to ingnore the problem.
A little later I started to play Watch dogs, I had payd full price for her just know my pc can run only 18 fps on the graph low. But, I thought it was just because of the game given that more people have problems with it.
But, recently, I checked a few gameplay videos of this laptop on youtube with the Watch dogs running game and apparently you can play with about 50 on parameters of dogs the average watch, is certainly not the case with my product!
After a while when I'm done with all that stuff, I decided to play a little less demanding game: cs. After playing for a few weeks, I've noticed that a lot of stuttering and crashing and Yes... even once, I had to google for hours still know that SLI was causing errors and as soon as I had turned off the game ran perfectly, but only on the smaller settings.
Yesterday, I bought a new game: dying light. Once I started, I immediately noticed that I had to scale all the graphs down to the lowest resulotions with all sorts of effects or disable setting the lowest. The game was so extremely small scale that I became extremely nauseous after playing for an hour.
Now, these are just a few examples to give you a true vision of the problem occurring, but you may have already figured out, it wasn't just these games, the laptop was in trouble with. I also had problems, play such games of chivalry, Far cry 4, Minecraft, Saints Row, as they could only be played with 20 frames per second on the chart and the lower resolution.
What I've tried
Last year, I tried a whole bunch of those given the solutions I could find on the internet. These are the things I've already tried:
-J' I updated my drivers
-J' I reset the laptop factory and everything reinstalled about 3 times.
-J' was playing with SLI profiles to see if this would result in anything
-J' I re inserted the ultrabay
-J' did regcleans and made sure I had no virus
-J' tried a few gameboosters
-J' checked the Task Manager to see that there is nothing wrong with the use of my material, GPU unfold to 3% by default when not gambling and the use of memory at that time is 30%.
-J' have also checked what drivers I am using and checked if I could make some settings in the settings 3D, without result.
Note that SLI is enabled and according to Nvidia controlpanel works perfectly.
Also note that the laptop is set to performance max and the downclockin when not on AC and back to 100% synchronization when on AC seems to work perfectly.
What I could try
I might try communicating with my friends friend and ask him to run a backup and load this backup on my computer to see if the results can be different, or I could sell just the laptop.
I have NO IDEA what I have to do on the side to see if it fixes something, this problem has been haunting me since I bought the laptop. Is there someone who can help out me?
-Very well, so I don't know what I did, but installed a whole bunch of new pilots, charged that some tests and things seem better run now, otherwise I will probably notice in the future. Thanks for your help anyway and coming to your questions: Yes, both cards were at work.
-
Pavilion 14 E019TX: Know the resolution of the WebCam
My PC has a WebCam Built In [True Vision Webcam HP HD]
How many MP (megapixels) is my Webcam?Thank you
Hello
The following link shows its specifications:
http://support.HP.com/us-en/document/c03774641
which shows '(face) Webcam built-in HP TrueVision HD with digital microphone (720 p, development, low fixed slight improvement)'.
720 p for the height (h), with 16:9 ratio now you can work on the width (w) and the pixels total = w * h.
or 720 x 1280 = 0.9 million pixels.
Kind regards.
-
Need help to find Windows 7 drivers for my 14-n206ss Pavilion
On Friday bought a 14-n206ss Pavilion comes with Win 8 Home preinstalled, since then wouldn't decided to downgrade to win 7, and after a new installation had some problems finding the right drivers.
The following links will give u the exact specifications for laptop
http://store.HP.com/SpainStore/merch/product.aspx?ID=G1N41EA&opt=Abe&SEL=PCNB
http://www.ElCorteIngles.es/Tienda/Informatica/browse/ProductDetail.jsp?ProductID=A11795795
Already checked the page of support & drivers hp for this laptop. At first glance that supported HP thisof cause the computer showed Windows 7 64 drivers, but after download and try again have problems with some of them, as driver wireless, audio driver, the keyboard function keys and still have doubts about how to install the graphics card from AMD (AMD HD radeon 8670)
Whatever the case, my main question is how is possible decommissioning is so difficult when should be easier, for over the NTR customers interested in Windows 8. Why HP positions drivers who does not work for windows 7, and even one time why is so difficult to get the laptop run smoothily?
At some, but not all, some have worked smoothly, others have been a pain in the ass, that's why I'm here looking for more wise help
Graphics card
When is on the graphics card has entered the series troubled until realizing I should first install the chipset intel then tried this driver is part of the page for the AMD HD cards)
High definition (HD) AMD graphic driver 2013-11-25, version13.151.2.0, 277,01 M
), it worked, but the center of catalyst, I got is pretty well pretty basic, not like the one I have for the desktop computer, must be one installed the wrong driver? Cause when I saw first the driver (without having to first install the chipset) got the AMD RADEON HD driver 8670, but the cause was not the installed chipset has failed. So, I wonder if I have to uninstall this high definition driver AMD HD and reinstall the driver AMD HD RADEON 8670?
Press the KEY
Need to reinstall the cause of pad driver touch that I received does not work properly (tried to look using the vendor ID and device ID without success, his watch as ALPS pointing device)
ACPI\AUI1711
* AUI1711
Driver WiFi
The Wifi driver does not work as well (think is a Realtek, but we tried to install an and still does not work properly)
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C
PCI\VEN_10EC & DEV_8179 & CC_028000
PCI\VEN_10EC & DEV_8179 & CC_0280
Sound card driver
Audio driver (think that even as with the wifi driver, it should be Realtek?) One installed is called Realtek High definition audio, but I could not install one offered in the hp page (of high definition (HD) Realtek audio driver)
HDAUDIO\FUNC_01 & VEN_10EC & DEV_0282 & SUBSYS_103C2162 & REV_1000
HDAUDIO\FUNC_01 & VEN_10EC & DEV_0282 & SUBSYS_103C2162
Keyboard driver
Driver keyboard, appears as a standard ps/2 keyboard
ACPI\PNP0303
* PNP0303
Monitor driver
Monitor generic PnP monitor as wristwatch. Wonder if there is a driver for this laptop monitor?
MONITOR\AUO103C
Webcam feature
NA not install yet
Appears as > HP TRUE VISION HD tried checking the device number and got)
Device search results
No matches found for: ' (9301) "".
USB\VID_064E & PID_9301 & REV_0102 & MI_00
USB\VID_064E & PID_9301 & MI_00
Don't know what I should check maybe the next those others?
PCI BUS DRIVER
ACPI\PNP0A08
* PNP0A08
Controllers IDE ATA?
Several appear inside this menu
The human interface devices?
There are as many appearing within this menu
There is a last called x 64 base PC ACPI
acpiapic
Thank you for visiting the Forums HP's Support and welcome. I looked in your question on your devaluing of the laptop. This has to do with Microsoft. Here is the document concerning the decommissioning of 8 for Windows 7.
WARNING *.
HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
Here is a link to your HP driver page. All of the drivers in Device Manager that have a yellow exclamation point or yield sign are not installed correctly. I right click and uninstall. Once all have been removed, restart the laptop.
I hope this helps.
Thank you.
-
How can I see if my trueVisionHD is on?
I have Skype but I don't know if the HP True Vision HD is turned on there is no light so I think it's the start
I have Skype but I don't know if the HP True Vision HD is turned on there is no light so I think it's the start
-
It worked and I tried to change the brightness and the screen went black. The exposure setting is completely to the right and I can barely see an image. Also, a pop-up came on compatibility, developed for Windows XP and I have Windows 7, so I clicked on Windows 7. When I go to setting on YouCam, it's showing only HP true Vision. This utility cannot fix it. Help, please.
Hi William,
I suggest you to perform the system restore to the date where everything worked well and let us know the status of the issue.
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
For more information about the system restore:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
For reference:
Why my screen is black when I start Windows 7? :
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
If the problem persists, then I suggest you to contact the CyberLink Support.
http://www.CyberLink.com/support/index.html
I hope this helps.
-
Please, I have a HP Pavilion Dv6 Notebook with HP True Vision HP's built-in camera and 3.5 Youcam. The camera does not, everytime I try to use it. Rather it comes up with the message "Cyberlink Youcam cannot connect to your webcam(HP TruevisionHD) please any help on how to get the fucking job
What I wanted was to uninstall... no mention of the re-installation.
I see that the latter is version 5, which I'm sure is more user-friendly than version 3.5 Windows...
http://www.CyberLink.com/products/YouCam/overview_en_CA.html?&r=1
-
problems if (Contains) &; removeChild
If I want to do it every time evilShadow touches charShadow, dark is added. the entire function is a function of frame of entry. and whenever evilshadow is not charShadow is not all black.
If (evilShadow.hitTestObject (charShadow))
{
if(fadePresent == false)
{
Black = new DarkFade;
dark.scaleX = 4;
dark.scaleY = 4;
addChild (dark);
fadePresent = true;
}
}
If ((evilShadow.hitTestObject (charShadow) == false) & & (contains (dark)))
{
fadePresent = false;
removeChild (dark);
}
everything works fine, but this error pops up
TypeError: Error #2007: child parameter must be non-null.
at flash.display::DisplayObjectContainer/contains()
to HorrorGame / checkforHits)
I have corrected errors with another variable
I pulled if(darkhere == true) if (contains (dark))
darkhere boolean indicates if dark is present on the screen. idk why does not work tho
-
I am trying to improve the quality of a photo for my site http://curbpainting.com representing our product of stencil street address numbers painted in black on white rectangular background. First of all, I took the picture at a distance of about 7 or 8 feet to show the relative position of the numbers in the entire border and the aisle so that the definition will never as clear as a big pic of a foot or so away. Also, the sun shone to give the first two digits clear tasks naturally so the photo does not give a true representation of dark how the numbers really are. If I could have foreseen the clear spots I probably would have taken the photo at an angle to one side that did not show the reflection of the Sun. I tried to use the PS brush to darken the figures but the brush was too broadly and looked lighter on the outer edges than the inner part and I need a tool that gives dark for the tool as a dark full coat should look. I never got the edges quite dark and every time I tried the brush would go over the edges. I also tried to use the pen tool in black, but it was too thin and should always be, esp after having detached errors goes beyond the edges. It is particularly difficult because figures have for the most part, all curved edges. Suggestions, if there is an effective tool in PS that I can use? Thank you!
Any chance that we could see an example of image?
You probably want to use the selections when you change the image. In this way, there is no 'spill', trying to fix specific parts of an image.
Also, in the future, consider a kind of diffuser so that the light shines directly on the subject. Perhaps you hold a sheet on you while you take a picture. (Who will know... other people watch while you take the photo?) Could wait for hours when the Sun is not shining directly on the subject too.
-
The color changes when translucent white
I'm trying to overlap several translucent color objects, and I need to have a white object behind them so I can overlap other objects in the background. Anyway, when I decrease the opacity on the colors, they change colour. Any way I can avoid this? See the example in the image:
It is a standard white rectangle with default white fill and black stroke and a red top, square with an opacity to 30%. The Red should look like the rose outside the overlap region, why it changes color over a white object?
Try it with preview enabled overprinting. This will give you a true vision of the final output.
-
My first simple Flash made with Flash Professional 8 to be posted on our website works fine when I test it on my Mac in Safari, but our webmaster is unable to read the html file.
Only the background appears. I used an FLVplayback component, followed all the instructions in the help section, the film has been encoded in the Flash 8 video encoder. This does not bode well for my future projects in Flash. I'm used to Adobe LiveMotion, but this knowledge is not help at all with this. Any suggestions would be greatly appreciated. If there is another section in the forum more suited for questions fans direct me to it. Thank you all.
Nath-
I'm no expert, but I've worked with exactly the same types of files. Here's what I found.
Tell your webmaster to clear its cache. You should also. If the swf and flv are cached you won't get a true vision of reality.
Good luck. -
VISION and research - how to make the font darker and easier to read "Help".
Recently had a good success to make the police clearer and darker in the Finder through this article
http://www.macworld.com/article/2026699/stop-squinting-make-text-bigger-in-os-x. HTML with result
as a result of these directions for Finder also increases the clarity of printing at the Mall and elsewhere.
BUT what of the online manual that appears when using the search for "Help"?
IS it there A WAY OF MAKING THIS DARKER/more CLAIR rather that the shades of gray that I am experiencing.
Using a MacBook Air (mid-2013) Yosemite 10.10.5 - who says that my reading is not as good
resolution than the models that followed.
Reading others also eager to make the darker lighter text also, the eyes are bad after
to see the lighter police force and it makes it less interesting to learn what this online
Manual has to offer. Please help if you can give me any advice on improving this situation.
Try to open help and then use the command - + to enlarge the page.
-
Impossible to activate the dark mode in Firefox 39.0 with subject: config.
After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.
That's what I changed:
Browser.devedition.Theme.Enabled: true
devtools. Theme: black
lightweightThemes.selectedThemeID: [email protected]I use "Fox, but better" plugin and I have to disable it without success.
guigs2 said
Hi CiRiX,
I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...It is possible to reinstall the extension, or try these troubleshooting steps:
I managed to fix it by clicking Activate and then deactivate it on another theme.
Thanks for your help!
-
Currently there is so many new devices out there with a myriad of applications, those that the Apple TV 4 do not provide, I was wondering if iTunes is really a true 1080 p video stream? When I compare other applications (I don't speak names) on other devices, they all seem to offer a video stream clearer for the quality higher, darker colors, deeper color, more depth and contrast, defined better than iTunes. My TV is a Sony 43 inch 4K UHD, but can set the parameters (on TV) to 1080 p using all 3 devices, I have, and the Apple TV 4 seems to be the image of poor quality, which surprises me, because other Apple products are much more superior image quality and video playback. I wonder if anyone else notice a difference slight but quite annoying in streaming video on the new ATV4?
Is this because application developers have not updated real-world applications to be optimized yet for the new ATV4?
I've never heard of true 1080 p, but yes iTunes a 1080, 1080 lines of progressive video. Speaking General iTunes has higher rates that most other offers should therefore provide the best quality.
Maybe you are looking for
-
Why my partially black screen when using win7?
Hello everyone. I'm having this problem with my screen. When I start using my computer, the screen is very clear, but in a short time later, it darkens partially. I can still see what is happening, but the darkness makes it harder to see things. Can
-
replacement of motherboard on the 2005 media center a1330n computer
Someone gave me this computer recently because the motherboard was bad. I was able to find an another mb just like it and installed yesterday and left everything else as it was in the computer. Now, when I turn it on it has a blue screen that says
-
need a video converter that converts files .mkv format Mp4... !
original title: video conversion tool I need a good job of video converter that converts files .mkv format Mp4... ! Help..! I want software that works properly. !
-
I plan to upgrade to Windows 7 on my Gateway MT6828 Vista Home Premium.
I ran the Windows 7 Upgrade Advisor Beta, which showed that everything was OK except for the following: "Texas Instruments PCIxx12 Integrated FlashMedia Controller. An update is needed to make this compatible with Windows 7 device. I have not been a
-
PhotoShop won't boot because "scratch disk is full."
When I try to open PhotoShop 7, I have an error message-"unable to initialize PhotoShop because scratch disks are full." Troubleshooting messages suggest the defragmentation and disk cleanup - I have these regularly perform a certain amount of time