HP ztouchsmart h052 usb rear

Similar Questions

• Rear USB port of U2414H not function

  Hi all

  I use U2414h Dell monitor connected with my surface pro 3 with the mini display cable and usb cable upstream to serve a second monitor and usb hubs, and I always connected a laptop hard drive to the USB rear powered high at the back of the screen because I do not have any other usb port on my pro3 surface...

  Today, I found my drive hard laptop display message connected and disconnected all the time and so I try to disconnect the hard drive and reconnect to see if the problem can fix it. But when I plugged the portable hard drive at the back usb port, even once it does not turn on. I tried to plug the portable hard drive directly to my surface 3 pro, it works and readable.

  Then I tried a series of troubleshooting:

  -Turn off the device and reconnect all the cables thew

  -by using another usb cable to connect the laptop hard drive

  -using a different cable upstream between surface pro 3 and U2414H

  -Connect a low device (memory stick) to the rear usb port

  -using a different computer

  It seems the USB back have no power and cannot be used, since I'm on soundbar AC511 connected to the usb port of U2414h base, I'm sure that all three ports are still works.

  Is someone can help?

  * Turn off the monitor
  * Disconnect each cable from the monitor (food, video, USB)
  * Press and hold the button for 30 seconds
  * Reconnect all cables and retest

• Camera Samsung can print directly (USB) to 8500 a but not 8600?

  Hi, I have a few Samsung SH100 with built-in Wifi and for months, we could actually print directly from the camera on our Officejet Pro 8500 has more printer only via wifi.  In cases where we had to move the camera and the printer to a temporary location and had no WiFi, it would rely on the USB cable provided with the camera.  Plug it into the USB port on the front and choosing the option "Connect to the printer" on the device picture allowed me to photo printing directly from the camera (without the offset of wifi 2 minutes).  When I plug it in, it says "PictBridge" and "Device to use PictBridge for direct printing" and then I navigate through the camera to select the photos to print, etc.

  A few months later, I bought the Officejet Pro 8600 Plus think since they are only a single model apart, I would have roughly the same features.  But while the 8600 can connect to the internet and receive e-mail print jobs, when I connect the same USB cable from the camera to the front port of the 8600 I get the following error:

  "Unknown device".

  Disconnection of memory. For more information, see the electronic user guide (also called 'Help') available on your computer after you install the software.

  (I confirmed that I have the latest firmware for the printer and not that it should be relevant for our purposes, the computer to which it is connected via USB (rear port) takes place the most updated software HP).

  Any advice would help, whether it's something we can do to the 8600 or if we scour the internet to buy another opportunity 8500.  Thank you!

  -Jason

  Hi Jason,

  I'm afraid that the 8600 series does not support PicBridge, even if they are similar models there are differences...

  You can find the specifications below, PicBridge is not supported and therefore connect a cammera directly only is not supported:

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06a/18972-18972-238444-12019-3328086-4322915.html?DNR=1

• Backup USB on OS 6.2.4 Ultra6 failure

  I have problems with the backup my Ultra6 via USB on a Seagate external 4 TB USB hard drive, namely:
  

  • To a specific USB port USB backup fails with "Backup: backup error '': destination are not available."
  
  
  • USB ports listed in the drop-down list in the backup configuration include "USB back Top" and "Low rear USB" while the Ultra6 has left rear USB ports and rear right of USB in the back
  
  
  • The USB device has iterrated of USB_HDD_1 through USB_HDD_3 (denial of the backup on the part of the USB solution)

  Logs show that the device is connected to:
  usb_devices
  

  product 2-1 = DISK USB idProduct = 1000 idVendor = 090c = speed 2 = 480 devnum
  2 - 1:1.0
  product 2-2 = Expansion Desk idProduct = 3312 idVendor = 0bc2 devnum = speed 3 = 480
  2 - 2:1.0
  ..
  7 - 0:1.0
  7-1 product = Back-UPS ES 550 G FW:870.O3. I have USB FWidProduct 3 = 0002 idVendor = devnum 051d = 2 speed = 1.5
  7 - 1:1.0
  
  nls_cp437
  
  Devices *.
  / dev/disk/external/3:-1T4000DM000 - 1F2168:Z3017Q3G:480:7814037160->... /... /SDH

  While the work of backup set (in etc/frontview/backup_jobs.conf) (to use USB Back Top, Front USB and USB rear lower):
  

  High USB = dst: [usb:usb_port_3:3].
  The Front USB = dst: [usb:usb_port_3:1].
  USB rear bottom = dst: [usb:usb_port_3:4].

  A someone has encountered this problem and solved? I have plugged in the left return postage and a connected ups on the rear port straight to 4. Nothing is plugged into the port on the front. I have not traded or tested other ports yet but do this weekend.

  Any help would be greatly appreciated.

  For the Ultra 6 port mapping has been added to a future firmware version, but I can not provide ETA right now.

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• Where is the front memory card and the access drive to USB?

  Hello

  I have a h8xt HP Pavilion HPE custom (order number {retired privacy}) which should be

  card reader memory 15 - 1, 4 ports USB 2.0 (front), audio, 2 USB (rear-facing top of page).

  Forward, I can open the tray of blu - ray, and I 2 (rear-facing) USB ports next to the audio above.

  Question #1: However, I couldn't find the memory card reader slots? Where is he?

  Question #2: Also, according to your specifications, he says 4 USB 2.0 ports (before), but I can only find 4 slots at the rear of the machines (the side which has the range cables for video cards, etc...).

  Please notify.

  Thank you

  -VAnce

  There is a Panel sliding below the bar of red light glowing on the front of your case. Push down on the Panel to expose the audio, usb and card reader. Click on this link for a Video demo of HP.

  Frank

• BDP-N460 plays not universal Blu - ray

  Has not been able to get some Blu - ray titles to play before previews. Discovered that they were universal at all. Found on another forum that everything I had to do was clear existing comics, data on the USB plugged in the back, and the problem has been resolved. Initially, I unplugged the USB but found that erase BD was the simplest solution. (BD data is accessible in the video menu loading no BD - Rom)

  Hello
  Welcome to the Forums of Discussion of the user.
  Thanks for sharing your discoveries. Yes it's true clearing the BD-Data will help with the playability of some titles. Please provide exactly the title and we will tend these questions of non-playability of the title to engineering for future updates possible.

  The reading error occurs due to a conflict with the BD-Live data. Make sure that the latest system software (firmware) update has been installed
  http://eSupport.Sony.com/us/p/SWU-downl... group_id = 6
  and then follow the steps below to adjust the settings of the BD player in order to see the movie.

  Follow these steps to set the connection Internet BD do not let:

  Using the supplied remote control, press the home or Menu button.
  Select settings.
  Select view of BD/DVD settings.
  Press the Enter key.
  Select Connect Internet BD.
  Do not select them.
  Press the Enter key.

  Follow these steps to change the selection of USB (rear) peripheral USB device or USB device (front):

  Using the supplied remote control, press the home or Menu button.
  Select the VIDEO.
  Select the USB device.
  Select the desired input USB setting.

  Follow these steps to clear the conflicting data to BD-Live.

  Select the video.
  Select erase the BD.
  Press the Enter key.

• his lost after an update. need help please

  had some kind of system update. his has worked yesterday. update today and now nothing.

  Here is what I have

  HP Pavilion HPE h8xt
  • Genuine Windows 7 Home Premium (64-bit)
  • Intel Core i7-2600 processor four hearts with Turbo-Boost [upward to 3.8 GHz, 8 MB cache]
  • 9GB DDR3 1333 MHz SDRAM [3 DIMMS]
  Drive hard • 1 TB 7200 RPM SATA 3 Gb/s
  • No additional desktop software
  • SAVE $20 on Norton Internet Security (TM) 2011 - 15 months
  • 2GB DDR3 NVIDIA GeForce GT 530 [DVI, HDMI, VGA adapter]
  • Power 460W
  • DVD SuperMulti burner
  • Blu - ray player & DVD player
  • Card of premium LAN Wireless-N and Bluetooth (R) (2 x 2)
  • 15-in-1 card reader memory, 2 USB 2.0 (front), audio, 2 USB (rear-facing top of page)
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound

  These speakers... http://www.shopping.HP.com/webapp/shopping/product_detail.do?product_code=BR386AA%23ABL

  Hello

  Please follow these steps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Kind regards.

• Selection of car audio

  Hi, I have a Sony car stereo, and I would like my next device would still be a Sony. I'm looking for this condition:

  -Multicolor button

  -usb rear (I would like to connect my HDD)

  -available bluetooth (I am very disappointed Pioneer models can manage several bluetooth phones from Sony, including my real Samsung not supported Sony)

  -distance

  All MP3 player:

  -J' wish that the MP3 tags would be shown (also the image cover)

  -perhaps would benefit from support playlists (m3u format)

  -name of the file (full or last file)

  Available device support these features?

  Thank you.

  P. S.

  I'm also a little disappointed App Remote ins't suitable for other OS, Bada, or Linux.

  Can you imagine if App Remote could manage the music files stored on devices, Linux or Windows?

  Or if the customer may management interface own media player?

  Salvation in the shade,

  You can check the WX-GT90BT car audio system which has the Bluetooth with the App Remote Control receiver

  The exclusive App Remote function combines music and apps Smartphone select it from a list of single source that can be displayed safely and directly controlled by your receiver. It comes with the remote RM - X 231.

  http://store.Sony.com...specifications

  If my post answered your question, please mark it as an "accepted Solution".

• OfficeJet Pro 8625: Which of the 4 rear usb ports can I use to connect to the computer

  There are four USB ports on the back of the printer.  Group of two ports on the top and another group of two below.

  Which of the 4 ports should I use to connect to the printer.  I intend to use the ability to fax from the printer.  Best, Aaron

  Hi Aaron,

  There is only a signle USB pet at the back of the printer, not 4

  To connect the printer to your PC, plug the USB to the USB Port rear, as shown below:

  

  To connect the device as a Fax, connect a phone cord from 1 d to a wall phone jack.

  Kind regards

  Shlomi

• Windows 7 Professional 64-bit disables 4 of 6 USB 3.0 rear Ports

  Greetings,

  I run a card mother Gigabyte GA-z77x-up4 with 6 ports USB 3.0 at the back. And with 2 ports USB 3.0 USB 2.0 and 2 in front. Once windows is loaded the USB 3.0 ports 4 back to become disabled. They still have power on (the led on some devices), but no device is recognized. If a device is plugged into these 4 defective ports, the error message "this device drivers have not been installed. (Code 28) "appears in the device with a yellow exclamation point Manager.

  I've tested all the front and rear USB ports with my keyboard in the Bios and Linux, all work and recognize the keyboard entries.

  Under Windows I have:

  Uninstalled/Reinstalled drivers USB/USB Host Controllers in Device Manager

  Check each USB controller enabled "Computer can turn off this device to save power" (were)

  "DisableSelectiveSuspend" line was added to the register in: Local_Machine/System/CurrentControlSet/services/USB

  Changed the parameters of energy saving of USB in 'Off' on "Sélective USB Energy saving"

  Digitized for the new hardware.

  This problem occurred on a vanilla to installation of Windows 7 (with no drivers/updates installed), as well as restoring a backup of a Windows 7 installation up-to-date with fresh (to 23) drivers (May), or by using a subject an old backup of 1 year.

  I'm running out of ideas what to do, as I keep plug devices outside all the time to compensate for the lack of 4 ports. Except to buy a USB hub and plug it into a port of lightning.

  Two drivers for my Chipset USB were offered on the page of the official driver mainboard. I had to install Intel AND VIA. After that VIA has been installed, the other 4 USB ports are recognized. Problem solved.

• What is the difference between the rear USB ports and front USB ports?

  Why some USB equipment only works with the USB on a computer BACK and not the FRONT USB port?

  USB ports on the rear panel carry more voltage (voltage not exceeding) the USB headers on the front...

• Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

  I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

  

  (#2) - USB 2.0: 4

  (#4) - USB 3.0: 2

• Laser jet P2055d: rear USB Port stuck in the printer casing

  The female port back where the USB cable is connected to the printer was broken, loose and abandoned inside the case. Looking for a manual or tips on how to safely disassemble the casing plastic, so that I can fix the hub of port in place.

  Quick follow-up...

  If you buy a used of course trainer, is he a 2055 D printer, if the trainer comes a host of Simplex, that it will not print 2 sides of your machine.

• My usb speakers work fine, but cannot get headphones to work in the front or rear of the analog plugs.

  It doesnot seem to even be able to recognize that they are pluged.

  Hello

  1. What is the brand and model of headphones?

  2. What is the operating system installed on your computer?

  3. the helmet normally works on another computer?

  4. are you able to use any other helmet on the computer in question?

  5. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  You can check if the headphones are activated as a playback device. Please follow the steps mentioned below:

  (a) right click on the "speaker" icon and select the playback devices.

  (b) on the reading tab, right click and select "Show hidden devices" and "Show disconnected devices" if they are available.

  (c) select headphones and turn it on.

  Method 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) click Start and click on Control Panel.

  (b) click on the sound.

  (c) in the new window click on the tab 'Read' and right-click in the window and click on "Show Disabled devices".

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click "set as default".