power printer, photosmart c3210a problems

Similar Questions

• xi print Photosmart 2610 problems

  My photosmart 2610 xi has just started printing and copy very slow (8-10 minutes per page).  I've updated the drivers and software but no improvement.

  All solutions?

  I'm sorry you have a problem with slow printing.

  Try to perform a hard reset on the printer. Unplug the power cord at the back omit it for 30 seconds and plug it back.

  Try to print a self-test page or the printer in the printer itself status report. It is still slow?

  If this isn't the case, it may be a connection problem. Maybe change the USB cable.

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• Photosmart C6180 problem of Power-Up/Power-Down - loops on/stop/start/stop etc.

  I had the C6180 Photosmart wireless connected to a Mac OS X 10.5.6 laptop Macbook Intel and IBM PC XP SP 2 for more than 2 years.  I did have major problems with the printer.

  Recently, I have known a couple of electric in my house.  Since then the printer has turned off randomly once or twice.  Today the printer began to turn off/on/off/on/turned off/turned on etc.

  It lights up and shows the HP logo and process bar animation for one minute, followed by the message: "abnormal termination.  To avoid damage on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward.

  I tried to enter batch Mfg mode by organizing the * and # keys.  It flashes "Mfg commands - enter special Key Combo" for the second of two, then stops and makes a loop on/stop/start/stop again and again.

  I have disconnected all data cables, installs the printer in another room, closes the wifi on both computers and connected directly to the wall on a different circuit to eliminate problems of low power as the culprit.  I swapped the power cable between the wall and the block of the AC adapter with the same exact type of cord of another piece of equipment with the same results.

  I wonder if it is a symptom of a surfboard logic damaged in the printer, or a problem with the AC adapter?

  If it is the logic board, does pay to get it fixed?  An equivalent printer for Mac would cost about $200.  Not to mention that I came just to have stored on cartridges.

  What is a likely indication of a problem of brick AC adapter?  If so, should I spring for a replacement block AC adapter for $30?

  I was not able to find this question in a post on the forum and I was wondering if it's 'Au revoir' to the C6180?

  Thank you for your contribution to this number

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Let me know the results.

• HP Photosmart C4780: problems to reinstall my printer.

  My computer (Windows 7, 64-bit) showed that I had a major update for my printer (Photosmart C4780) HP. I installed the update, but it failed near the end. Thus, the Installer removed all printer software because it has not ended.

  I tried to re - install this printer all day, but no matter what it will fail because no driver was found, even if I download it directly from the Web site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3794...

  After that, I get a "fatal error", which causes the interruption of installation, then uninstall all the software again.

  I followed the advice on the support pages and remain to be resolved this problem. I've also included pictures of mistakes just in case it is useful:

  No driver found: http://i.imgur.com/t5suTFj.png

  Fatal error: http://i.imgur.com/3wblqLe.png

  If anyone has any suggestions, it would be greatly appreciated.

  I don't know what I did differently this time, but I finally got this printer to install. I wish I could give a better solution in case others are facing a similar problem. However, I honestly have nothing to say apart from all uninstall and install and then again using the HP printer Installation Wizard.

• Photosmart C4485: Page alignment printer Photosmart C4485

  Hi all patients).

  Briefly:

  Used my printer Photosmart C4485 almost a year without worries. My daughter has tried to replace the cartridges and print the alignment page. The book got stuck in the printer, the print alignment page was not completely finished.

  The printer was asked to place it inside for scanning, had no proper scanning alignment page and since then, I can't use the printer more.

  Does anyone have a suggestion about a fix?

  TIA,

  Vio

  PS: Don't have a friend with the same printer to ask it an alignment :-(page...

  Hi @Vio,

  Welcome to the HP Forums!

  I see that you are unable to print the alignment with your HP Photosmart c4485 printer page. I'm happy to help you!

  Please, try the procedure described in this guide, an "alignment failed" Error Message is displayed on the control paneland let me know what happens!

  Hope this guide to solve your problem and have a nice day!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• 5515 with photosmart driver problem

  I have problems to make the photosmart 5515 drivers employment. I am running windows 7 on a toshiba satellite c670.

  Software installation cannot find the printer on the network, even if it is connected and firewall is turned off.

  More disturbing still, the installation software also does not appear to identify the printer when connected via USB, even if the laptop recognizes the usb connection.

  I rebooted all systems, turned off the firewall and checked all the suggestions in the troubleshooting guide.

  I even tried to uninstall and reinstall the driver download.

  All attempts have failed.

  Make me very frustrated.

  I think I finally tracked the problem and hope to have solved.

  The software installation tool has downloaded the wrong version of the driver. It seems I have a d 5515 printer, but it has been download a 5515 driver has that (surprisingly) completely does not work with the d 5515. Once I found it and downloaded the correct driver, things began to work on the USB port, even if wireless connectivity is still not working. I lost confidence to try to resolve this, then goes to live with USB.

  There was no warning or alerts on the incompatibility of different versions of these drivers and driver autoinstall tool has completely failed to address this issue. There was no information on the label printer indicating it is which version of the printer, and HP systems has no ID of the printer by using the serial number correctly.

  Overall, I spent 10 + hours going round in circles with installation tools HP printer, which could easily have diagnised question but just told me to reboot the router, then try again. A very annoying feature is that you cannot leave the installer hp or HP Print doctor if the configuration of the printer is having problems. You have to go into the Task Manager and kill the installation application.

  Overall, very impressed - the installation of the device more painful I had over the years.

• Istall printer Photosmart C5140 depends on the SNMP response.

  All-in-one install the driver for a printer Photosmart C5140. It hangs on the answer SNMP screen. What should I do about it?

  Greg

  Hi Greg,.

  OK, it seems that there is a problem within the operating system on another computer, contributing to the failure of the installation. If you were not able to install on the new user account, it can be a problem where you may need to consider to backup your data on the computer and run a full system recovery before you will be able to get the printer installed on this computer. I would like to know what you want to do at this point?

• Upgrading to windows 7 - does not recognize my printer Photosmart HP 5510

  my upgrade to windows 7, microsoft does not recognize my printer Photosmart HP 5510? I've tried everything

  Try to download the latest drivers from the HP website:

  http://www.support.HP.com/us-en/product/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905/drivers

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a

  I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet.  However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a.  If I click on devices and printers, it shows my device from the computer as requiring troubleshooting.  When I click on troubleshooting it signals that "Driver for Photosmart Prem 310 is not installed.  Install the latest version of the driver.  When I applied the fix, it indicates that the driver is not found.

  I tried to download the latest driver on the website of HP in various ways, finally to uninstall all HP software displayed in the Panel and then removing all the HP files remaining on my laptop.  I then ran PC Tools Registry Mechanic, disabled my anti-virus, restarted the computer software and reinstalled the complete C310a software on the HP site.  It ended without any problem, and after adding the printer to my list of printer, it is printed on a perfect test page.  However, Device Manager always reports the C310a driver is missing, but it cannot find a copy when it finds one.

  How can I convince the device manager that everything is going well (apparently)?

  apeace, I recommend you do as you did, uninstall the printer under programs and features but also by ensuring that this printer he is removed from the Manager of peripherals and devices and printers. Then after restarting the computer and by disabling the firewall, download the drivers and software for full adjustment and install them.

  You can also run this utility and see if that solves the problem automatically!

  http://goo.GL/u3jDE

  Let me know!

• Yellow vertical line displayed on the touch screen of new printer Photosmart 7510.

  I have a vertical yellow line on the touch screen of my new printer Photosmart 7510.  The yellow line is part of the screen (pixels).  Install my printer on my XP Windows last night.  This is a new printer, right out of the box.

  This problem can be solved, or should I get a replacement?

  To help you better, if the printer is within the return period, you can contact the store you purchased at or if the printer is in warranty period for HP, you can contact HP phone support(1-800-474-6836) for a replacement.

• Power cord Photosmart 6520

  I just moved and have already synced a myriad of cables for devices... However, only power cord is not clear, it is that of my printer Photosmart 6520. I think that I was expecting a typical feeder with an adapter AC inline (as for a laptop). But all I can find is a single cable with wall plug and a 2-socket plug that goes directly to the back of the printer. That sounds about right... ?

  Thank you...

  Hello

  Yes, HP Photosmart 6520 only uses a single cable from the wall jack to the printer, see the link below for the items shipped with printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03423827&lang=en&cc=us&TaskID=101&prodSeriesId=5169039&prodTypeId=18972

• VM Acrobat printing and printer... problems?

  I've been printing without any problem of my VM but it has just stopped working. I have Acrobat Pro and HP Photosmart D7260 installed on my host machine and connected via NAT to my VM Windows XP Pro. When I print, I get text "garbage." I looked around and I noticed that it seems to be a recurring problem. I followed each thread and a blog that I could find. I still have no luck, so I post here. I'm almost possitive is an errors of communication between computers and printers. Is there something I can do? I would be happy if I only get Acrobat to work. I am very experienced with Windows and very good with OSX10.5. Little or no hand-holding.

  If you know what I've done: I have repeateadly rebooted the virtual computer. the VM and the host; the Modem, router, machines and HP printer. Always the same. I went to bridged and installed the printer with Hello. I had the same type of orders very.

  My configuration:

  Fusion 2.0.1 - with VMware Tools

  Mac Pro OS X10.5

  Windows XP Pro

  Adobe Acrobat Pro 8 on my Mac

  HP Photosmart D7260 USB to an Airport Extreme connection

  NAT network

  No printer driver installed in the Windows XP VM

  Thank you guys so much!

  Removed double wire.

  I'm not clear on how the client connects to the printer. You mention that no drivers are installed in the guest - are you using Fusion impression passthrough (e.g. under the VM settings, printers is enabled) or another method?

  Have you tried to reinstall Fusion (this will not affect your virtual machines) and then restart the host?

• Windows 7 driver for printer / photosmart premium

  I installed windows 7 on my hdx 16 and I need drivers for the printer / photosmart premium 309 c. Someone at - it a chance for the two to work together?

  Thank you

  Russ

  I downloaded version 13 and have tried to install/uninstall several times. This includes the removal of the printer devices and Device Manager. When I try to reinstall I usually get a fatal error during 'configuration', the last step. I can print to the printer and I can run most of the photo. The center of solution won't work, which is a key piece of software for this printer. Any ideas?

  I'm running Windows 7 Ultimate (not beta). This software is properly installed on virtual xp but I prefer to run from 7.

  Thank you

  Message edited by russ1 on 10/14/2009 12:15

• Photosmart 6525: auto efax print photosmart 6525

  Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

  The printer (Photosmart 6525) allow Eprint and connected.

  Appreciate any help,

  Frank

  Hi Frank,.

  Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

  Connect your user on eFax.com and change preferences as follows:

  • Sign in to your eFax account.