HS-190 monochromator

I'm writing a labview program that allows me to control the monochromator HS-190 via a remote desktop connection. I am changes to existing code that uses this function to perform steps IPCE, but everything that I have to do is able to control what wavelength of light, the monochromotor output. I enclose the original program (program - angular IPCE) as well as what I have so far (monochromator). Because of my inexperience with labview, it's hard for me to know exactly what is necessary.

For example, the structure of the event "Timeout 0, ' in case 'False, default' gives me a lot of trouble because I don't know what its function, but it is apparently very necessary. No matter how to change the program, it will not progress beyond this point.

Any help you offer is more appareciated, even it its exaplining just exactly this structure of the event. I tried the instrument as well as for this particular monochromator drivers, but I couldn't find anything.

Thank you

Hi UNCKai,

Before we get too far down the rabbit hole, I want to clarify some simple questions:

1. are you able to connect to the HS-190 at all?  I think that if you did not find an instrument driver, you were not able to communicate with the monochromator using even the most basic checks of signal.  First of all, you must find an instrument driver.  Check with the manufacturer to see if they have LabVIEW drivers available.  It is possible to write drivers for your component, but it is quite a task.

2 what is the original program code that you are leaving to work correctly with the same equipment (HS-190?), or a different material?  If so, what equipment?)

3. If you are unfamiliar with the general concepts of LabVIEW, I suggest look at training online courses: http://sine.ni.com/tacs/app/fp/p/ap/ov/pg/1/sn/n5:selfpacedonline / depending on your service contract, you may already be eligible for a number of courses.  If you have a .EDU email address, I think that you can access some of the course for free.

Tags: NI Software

Similar Questions

  • Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

    Hello I am trying to download an episode of my Podcast podcast connect and get this error?

    Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

    my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

    It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

    Your show is already in iTunes.

    https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

    And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

    That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

    Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

    Rob W

    https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

  • Equium P300-190 - Question about upgrading the processor

    Hello

    I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

    My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

    Any help would be greatly appreciated.

    Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

    The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
    Where a party would not support the new processor, the unit will not light.

    So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

    The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

    So in my opinion it is not worth trying to upgrade the processor...

    In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

  • Satellite P500-190 stuck in a loop

    Well, I try to summarize what has happened so far.

    I have a Toshiba Satellite P500-190 has started acting as each task is too big for him, constantly showing disk hard loading, programs did not respond for a while... then I ran the reconverty tool, reset the c drive, the problem still there.

    I ran all the error detection of characteristics of pc, no hardware problems or software detected. So I installed malwarebytes anti-malware and ran a scan, it finds errors, but before I could act, the program froze again no response. Press ctrl alt del, black screen, no response... reboot. Now my dosent pc even trying to start windows, only error detection program and each restart goes like this, even after going through the program as it is said.
    I tried to get to the other menus of repair, but it says I must be logged in to do this.

    Any ideas how to continue?

    Hi bug

    Please reinstall the recovery image and boot OS without having to install additional stuff.
    Do not connect to the internet and check the functionality. Open some pre-installed apps and see if they will not work correctly.

    Play around with these factory settings and let us know if there is a problem.

    How old is your Satellite P500?

  • Re: Satellite M70-190 begins with PXE - E61: Media test failure, check cable of

    Toshiba Satellite M70-190

    put a new drive hard WD 500 GB, sata3. When to start Notepad appears.

    Tried to change the mode to boot from LAN SD - nothing.
    How to fix?

    (HHD 2.5 "500 GB WD Scorpio Blue SATA3 5400 RPM 8 MB)

    Satellite M70 is very old model of laptop, so I presume that this HARD drive is not recognized correctly (compatibility issues) and that is the reason why cell phone starts with the start LAN to the search option.

    Long ago I had M70 and right now I've updated with 260 GB if I m remembering well.

  • Satellite M70-190 - program for the diagnosis and WLAN

    Toshiba Satellite M70-190.

    What is the program and how it put in place?
    Appears in the bottom right of the screen. Inside there was the diagnosis of the computer, a wireless network...

    Helps to restore?

    Hello

    Can you please tell us what operating system do you use?

    I think you mean that the PC and ConfigFree diagnostic tool. The two you can download on the Toshiba site.
    Check this box!

  • Equium P300-190 power - free problem

    Hi all

    This is my first post here/first Toshiba number after owning my laptop for about 4 years!

    I have a big problem with my Equium p300-190, with a Li-ion battery.

    This morning, there seems to be a problem with my diet. The connection of the charger would change quickly load and then do not load per second or more.

    This continued all day until the computer turns off suddenly.
    Now even when the charger is connected, the lights on the front of the computer not able to save it as a laptop.

    Initially, I thought it was a charger problem, but the computer turns off when the power of 43%. I was wondering if someone can help me to determine if it is a battery problem or a problem of motherboard, as well as the suggested courses of action.

    Any help is really appreciated!

    > Now even when the charger is connected, the lights on the front of the computer not able to save it to the loading of the laptop.

    This means that the power LED and AC adapter LED don t light even if the AC adapter is plugged?

    In this case the new, good working AC adapter must be connected to verify if she s AC adapter or mobile phone related problem.

    Just FYI: I n t think that the problem is battery since the laptop should work fine with the AC adapter only. Even if the battery is removed and AC adapter connected, the laptop must turn on

    So either the AC adapter or portable s hardware problem.

  • Docking station for Satellite L10-190

    I am looking for a docking station (Dockingerweiterung in German) for Satellite L10 - 190.
    Are there? Can I use other docking stations?
    I hope that my English is correct.

    Thank you
    Dietrich of Germany

    [Edited by: admin 7 May 05 16:31]

    Hello

    Sam is right. Please turn around your device and you will see that there are no port that can be used to connect the unit to the docking station.

    Good bye

  • Satellite L300-190 - Wireless does not work in Ubuntu 8.10

    Hello

    I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
    First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

    I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
    I await your response.
    Ali

    Great news. Thanks for the link.

  • How to install Win7 on Satellite C870-190?

    Hi, I hope I'm posting in the category right forum then...

    My laptop is Toshiba Satellite C870-190 and it doesn t want to start my windows 7 CD.
    I tried first with the DEL-button that opened the system startup when I start Notepad and then choose the CD-ROM device and do not want to load the CD and then I chose F2, the first unit on the boot to the CD-ROM section, still do not want to load it... the final solution, I tried to install it from the Windows 8 (current operating system) from my computer--> CD--> setup.exe, and then click INSTALL.

    My computer laptop doesn t have allowed me to install it even from Windows... on file copy screen to say... and then it gives me an error that says that the operation failed... What is happening with this laptop?

    How can I format my HARD drive and then install windows 7?

    Thank you

    At the beginning I will say that I hope that you have created a recovery media (DVD or USB) before you have begun to install Win7.

    Return to your Win7 installation. A long time ago I installed Win7 on friends U940 and the first stage was changing course startup in the BIOS settings mode - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
    After the installation Win7 has started successfully, but in my case the SATA driver support was necessary.

    Please check first and send comments.

  • HPE 190 t: will HPE 190-t support a 3 TB internal hard drive

    My main hard drive failed on my Pavilion Elite HPE 190 - t. I bought a toshiba 3 to int. HD to replace the original and I see only about 800 GB of total storage space. I have a second 2 TB drive and it shows the amount of entire storage.

    Is it possible for me to get full use of 3 TB drive or am I limited by Truckee and 529 bios motherboard?

    Hello

    You need a complete UEFI BIOS to support a hard drive 3 TB as a hard drive to boot and your PC does not have this level of BIOS.

    However, you can use the HD 3 to as a hard only to data if you format GPT.

    The best situation is to use a hard drive that is less than 2 TB and is not a model of advanced format.

  • Re: Equium P300-190 - multimedia keys doesn't light up or work

    Multimedia keys between the speakers on my Equium P300-190 have suddenly stopped working and illuminating, the power button and the bar at the top of the touchpad still turn on any ideas how solve this problem?

    Thank you

    I don't know much on your laptop, try to update the utility Ppvs of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
    In addition, check in the Bios or install hw if illumination led option is enabled

  • Satellite P300-190: function keys do not work properly

    Yesterday I HAV epurchased P300-190 laptop but my function keys do not work properly! :-(
    Do you know what may be a problem and how can I solve it?

    See you soon
    Pocoyo

    What is the problem with the keys exactly?

    Try reinstalling the added value package (PVAT). You can get the latest version from the site Web of Toshiba http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Equium P300-190 does not start after battery

    Hi all

    The battery died on my laptop, Toshiba Equium P300-190 and power off.
    I have pluged in the output, but it won't start. The light is not yet on the front of the PC.

    Please shed some light on this problem on the issue that can be resolved.

    Thanks in advance

    Concerning
    Taro

    Hello

    Try this:
    Remove the battery and unplug the notebook sector.
    It takes a few hours (in my case, I left the laptop throughout the night disconnect battery and network.)
    Then reconnect the two parts and check if the laptop lights

    If it s hardware problem without gravity, then the laptop must turn on, otherwise you will need professional help

  • Qosmio G30E-190 - vertical lines on monitor

    Hello!

    I have a Qosmio G30E-190 and I would he repar! At the start, several vertical lines appear on the screen and the labtop always restart!
    I tried an external monitor, but nothing seems to...

    I want to update the BIOS in DOS Mode

    Can you help me please?

    The BIOS update has nothing to do with this issue and will not help at all.
    You know why this happen. There are two options, either is defective display or the graphic card is damaged.

    Start the laptop computer you see these lines from the beginning? You see when you enter the BIOS settings be?

Maybe you are looking for

  • Replacing the motherboard on Satellite Pro 2100

    Can someone tell me where I can get a replacement motherboard, as when I turn it on, the power light flashes yellow indicating an abnormal voltage in the electric power system? I thought it was the power supply, but the local pc repair center said it

  • Computer crashes when you print in Windows XP computer.

    Original title: Pc and printer error. Hi every time I turn on my pc printer freezes / crashes. Cannot use the keyboard or the mouse, the only option is to activate all power (including printers) off and reboot the system. I tried to turn on the print

  • I forgot administrator passwword

    I forgot my password administrator and for some reason my computer has been changed... Please advise

  • A few questions about CCM and IPCC Express

    Dear Sirs, The integration of the IPCC 4.5 Call Manager 4.2 is possible? Please tell me the difference between the versions Standard, Enhanced & Premium of IPCCX? Please guide me in this regard. Best regards Ahmad Manzoor

  • Slowwwwwww oh HELP, please, HELP (MAC)

    I downloaded PSCC 2015, and that's when my problems began.  2015 wouldn't start, crashed it, when he did start it ran so slow, that it wasn't worth it.I contacted Adobe and they helped me download my old versions: regular and 2014 CC (I'm on a mac).