Satellite P500-190 stuck in a loop

Similar Questions

• Satellite L675 is stuck in a loop of "system configuration".

  I have a Satellite L675 pre-loaded with Windows7 64-bit, because it was very slow, so I decided to recovere it at the default out-of-box factory.
  But he was now locked in a loop of "system configuration" with several reboots during more than an hour - that makes any sense?

  Kind regards

  If the recovery procedure is not in the end it makes sense. Recovery procedure may take up to 2 hours.
  Any donation interruption t installation and wait for that configuration and recovery image installation will be completed.

• Satellite Z830-10J stucks in a loop of the installation

  Hello

  I need help... I have a new Z830-10J. During the first
  configuration of the laptop crashed and restarted. I always get
  the error

  "The computer restarted unexpectedly or met."
  an unexpected error. Windows Setup cannot continue. To install
  Windows, click "OK" to restart the computer and then restart the installation. »

  After the reboot, I get the same error again and again... Pressing F8 does not bring
  repair options. Each option (Safe Mode, debugging and so on) doesn't lead only to the
  same mistake.

  What can I do?

  Best regards
  Markus

  Meanwhile, I have a bootable USB key with win7, but the
  RepairOptions can't find a backup to fix... but I see
  3 partiions, besides that theres a normal system backup and
  a boot partition.

  Edit:
  Im going to download the demo version of Win 7 Home Premium and
  will install this one. Don't you think that I am able to 'restore' the system
  After installation? Otherwise the whole software of tohsiba
  is lost :(

  Post edited by: ltkrogoth

• Satellite P500 - loop of reboot after using the Toshiba Recovery disk

  Hello

  I have a problem recovery SATELLITE P500. I did the recovery disks. It starts ok on the recovery disk and format the hard drive and copy the disks to the hard drive. Then, he begins installing windows and restarts.

  He then goes to a loop
  (1) marketing and says "Setup is preparing your computer for first use.
  (2) Toshiba banner saying please wait... Second installation may take several minutes. Pleae do not interrupt or shut down the computer!
  (3) Windows logo
  (4) close...
  (5) restarts and goes to 1)

  It would be great if someone could help me with this.

  Thank you very much
  Softari

  Hello

  I noticed the same thing on my Satellite P500, but I must say it s not a problem, it of quite normal. The computer will restart several times (10 times or more) to complete the installation.

  You know that a lot of drivers/tools will be installed and some restart is required to configure everything properly.

  So don t interrupt the installation of recovery, just wait a little longer and a coffee. Everything is done automatically and your laptop is reinstalled with the factory settings. :)

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• Satellite P500 PSPE8A - Number lock is stuck

  I recently bought a Satellite P500 PSPE8A-01R002 and the number lock is stuck and does not allow the use of the numeric keypad.
  I have read other similar posts on this forum about the number lock being stuck and the given solution is to download the update of the BIOS.

  When I go to the download page and enter the details of the laptop, a BIOS update for Vista 32 bit is available to be downloaded.
  Can you advise what download will get out of the lock number.

  Hi mate

  Where you look for the update of the BIOS?
  This seems to be an Australian series for Toshiba laptop.
  You will need to search on the Australian driver Toshiba for the BIOS page.

  In addition, intimate case of BIOS is OS independent. Therefore, it should be possible to update also using Vista OS

• Satellite A660 - 11 M stuck in a loop when installing recovery

  Hi all.

  I am now under a procedure of recovery for A660 - 11M. I used a bought at Toshiba Recovery CD.
  Everything was going well until the recovery is stuck in the loop of ' * now System Performance Rating *'.

  I found a similar case, where a person has solved problem of forced reboot. I did, too, but when he turned, the loop began.

  I wonder if there is anyway to stop this notation. It does not seem very important ultimately.

  Thank you.

  Hello

  You must re-run the HARD drive recovery.
  This means you must turn on the device
  -Press F8
  -then choose fix my computer
  -Then choose HARD drive recovery and
  -Retrieve the State of the box.

  Welcome them

• Satellite A50 stuck in boot loop after restore

  Hi, I tried to reformatt and restore my old A50, followed the instructions on the recovery disk only when it restarted it gets stuck in a loop, loading windows XP and then restart. When I start it in safe mode it says Setup failed to install and did the same thing.

  I started with a windows XP installation disc as well and it does nothing.

  Help, please!

  Thank you very much

  Leo

  Wait a moment Leo.

  If I understand correctly you original installation of recovery (recovery DVD) results issue described image.
  Installation of operating system with original installation disk Microsoft WXP ends with the same result.

  Can you confirm this?

• Satellite P500 (PSPE8U) - can not find the drivers for it

  Hello

  I've been and down these forums without success. I watched a lot of forums for the drivers for my P500. I've been through the pages of support sites toshiba of Europe, Uk, Australia and Japan... no chance either. I tried to contact the ebay seller I bought, apparently it is now out of business. It goes without saying that the laptop came without any driver disk. Unfortunately, one of the drives died on me and had no time to do a recovery with all the drivers disk. So now I'm really stuck. Here are the details of the laptop should anyone have brain waves for me-

  P500 - PSPE8U
  Windows Vista 64-bit
  ATI HD 4650

  At the time the largest bad head are the video drivers and my battery life is around 30 mins without the toshiba software. The stock of the resolution is a disaster without the correct driver. I tried the ATI46 drivers * from their site, but the application tells me that my hardware is not supported.

  Any help would be appreciated.

  Thank you
  Chris

  Hi Chris,

  Satellite P500 with model PSPE8U number belongs to the US models and therefore all the drivers and tools that you can find on the Toshiba U.S. page:
  http://www.CSD.Toshiba.com

  Just check the underside of your laptop again for the exact model as P500-S1234 number, then you can find the right drivers for your model. :)

• Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

  Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

  Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

  • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  • Under "Time range to clear", select "all".
  • Now, click the arrow next to details to toggle the active details list.
  • In the list of details, see the Cache and Cookies and uncheck everything.
  • Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

• Elite x 3: How do Hard Reset Elite x 3 - ring stuck in a loop

  Hello

  I just got my x 3 Elite and it is stuck in a loop, because I just get a blue screen and restarts it.

  I tried hardware reset using key combinations that I use on my other Windows Phone, but it doesn't seem to work on the elite.

  I also tried the Windows Phone recovery tool, but the elite is not yet listed on the devices.

  I looked on the uspport page to find out how to do the reset on the elite, but he mentions only get within the OS which I can't.

  Does anyone have an ideas/suggestions?

  Thank you

  Matt

  Hello

  I had exactly the same problem.  I powered my unit off (hold power butten for 10-15 sec) and kept it that way for more than 24 hours (Friday night to Sunday morning).   During this time, I did not get plugged.

  When I started this morning it starts normally (in my case it installed the preview of the release of windows mobile 10)

  Good luck

  Bryan

• Satellite P500 PSPG8E - buddies Bios 3 times - a long two short

  Hello

  I have a question: when I turn on my Satellite P500 PSPG8E I get 3 friends: a long two short!

  What is, perhaps memory?

  Thank you d ' attribute
  Greetings from the Germany

  Michael Burkhardt

  Hello

  This laptop supports Phoenix BIOS.
  You use a google for Phoenix beep codes for details on the meaning of the code.

  But in General; the code means that an error has been detected on the motherboard. The POST (power on self-test) cannot be passed.
  Theoretically, it may be a RAM issue, but it's just a suggestion.

• Installation of Windows 7 64 bit on a Satellite P500

  I bought the above system in August last year with 32-bit Windows 7 installed. I understand that it is not possible to upgrade and to a complete new installation. Is it necessary to format the hard drive first? Have backed up all my data (there was not a lot), but wonder if there is something else I need to know before you continue. Any help would be much appreciated.

  Hello

  I m a bit confused because I have too many Satellite P500 and, as far as I know, this laptop model comes with 64-bit only.
  Can you please tell us what P500 you exactly (P500-xxx)?

  You are right; before installation Win7 HDD needs to be formatted. If you have installed the OS in the past, I guess you know how it works.
  Associated with Toshiba here are two things you should know before starting with the installation of Win7 64 bit:
  # Create recovery with the original Toshiba image DVDs. This disk, you can use if you want to have the factory settings once again.
  # Drivers, tools and utilities must be installed in the proper installation order. If you ned some hep with it let us know.

• Re: Satellite M70-190 begins with PXE - E61: Media test failure, check cable of

  Toshiba Satellite M70-190

  put a new drive hard WD 500 GB, sata3. When to start Notepad appears.

  Tried to change the mode to boot from LAN SD - nothing.
  How to fix?

  (HHD 2.5 "500 GB WD Scorpio Blue SATA3 5400 RPM 8 MB)

  Satellite M70 is very old model of laptop, so I presume that this HARD drive is not recognized correctly (compatibility issues) and that is the reason why cell phone starts with the start LAN to the search option.

  Long ago I had M70 and right now I've updated with 260 GB if I m remembering well.

• Satellite P500 - blue screen on webcam whenever I try to use Skype

  Whenever I try to use Skype all I get is a blue screen where my webcam should be. I checked to see if my webcam doesn't work at all, and all I get is the web cam iniliziation failed Please check device and restart.

  I tried this but nothing helped. I also tried to reinstall the camera and update the drivers. Still nothing.
  Any help on this would be greatly appreciated. I was told that if I update the BIOS it might be useful, but I also said that this could screw up the laptop completely...

  Brenton

  In front of me, I have Satellite P500 and I use it almost a year now. Since the first day I use it with Win7 preinstalled original and Skype.
  Up to now, I have strength to have one problem with cam or Skype. Everything works fine.

  Are you using the original pre-installed OS? Since when you noticed this problem?
  You can use cam with other applications?
  Cam is listed in Device Manager?