Hyperion publishing merger planning, what components are needed?

Similar Questions

• What components are needed for a deployment of Site Recovery Manager?

  What components are needed for a deployment of Site Recovery Manager?

  Instances of vSphere, vCenter Server and Site Recovery

  Manager are required at the time the protected site and the

  recovery site (this does not imply aspects of license.

  Licenses are covered in a segment later in this document)

  Site Recovery Manager also requires an underlying replication

  product to copy virtual machines on the recovering site.

  Customers have the choice of using either vSphere replication

  or a third-party software based on replication.

  When you use the Bay, a storage-based replication software

  Replication adapter (SRA) is also required.

• What files are needed to access the aspect of the heritage of GarageBand?

  What files are needed to access the aspect of the heritage of GarageBand? After the upgrade my MacBook Pro and Mac Pro, the appearance of the inheritance is only accessible to the general public on the MacBook Pro. What files are needed for these instruments of the legacy and the filters on my MacPro? I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  You always have an installer for GarageBand 11?  An installation of iLife 11 DVD or the DVD Installer original system for snowLeopard with applications for funding?

  You can install GarageBand 11 of these media, if you set the date system your mac to a date until the installer has been released. Then, the certificate will be valid.

  the appearance of the inheritance is only accessible to the general public on the MacBook Pro.

  But because of legacy patches are available on your MacBook pro, you can copy all the missing files from the library of the Instrument and loop library in your other Mac.

  Compare these files in the folder/library on your system drive on Mac of high level.

  The instrument library: Library/Library/Application Support/GarageBand/Instrument.

  and loop library: / Library/Audio/Apple Loops/Apple /.

  Copy all the files to the corresponding folders on your MacBook Pro that is not there.

• What drivers are needed for HP pavilion 15-p086sa

  What drivers are needed for this operating system-Windows 7

  Pavilion 15-p086sa

  HP

  Hello:

  The W7 x 64 drivers for this model should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7174370 #N3338

  For graphics, your model uses the Intel HD graphics driver.

• Camileo P10 - what tools are needed?

  Hello

  first of all, I wanted to ask what codec is needed to edit the footage shot with a Camileo P10. I wanted to edit videos with Adobe After Effects, but it went all * files, indicating something preblems with audio and played the video chopped and cut. NA not having any problems, even corrupted video files worked better than the sh * this camera grows out of its sd slot.

  NO, I don't want to convert the files.
  NO, I do have solutions workaround.
  NO, I won't buy an another Toshiba cam.
  NO, I do have links of old threads that lead me no hand.

  What I want to hear is what Codec is needed, because there must be a mistake with it. Pieces very well with VLC, but not with WMP, winamp, quicktime, nothing else.

  Alternatively, you can suggest some tools that I use. I would have preferred a sledgehammer, but maybe a buzz saw is fine too. Unfortunately, I can't make a video to destroy the cam. You should know why.

  Hello

  > btw, I thought that it out by myself
  You can also post how you set for yourself? I think it would be interesting for other users.

  In addition, I put t understand your problem. Here he s a user to user forum where you can talk with people like you and me. This means that there is no guarantee that you will get an answer to your question. Not all questions can be answered users then sometimes it s advisable to contact an official authorized service provider. Guys can provide truly professional assistance.

  And I doubt that other manufactures have a better support. From my experience, I can say as I m satisfied with this forum and my authorized service provider and as you can read here, that can confirm many other users as well.

  Finally and above all the door here in the forum is portable because it s a Support Forum of computer systems that you see under the Toshiba Logo. Do you know what that means? This means that most discussions and users are in the notebook section research and software only.

  In any case, I m glad to hear the problem is solved. :)

• After viruses need help please - what drivers are needed

  We had a virus on our satellite pro M40 and remove one of my friends "kindly" offered help. then he deleted the partition with the windows operating system booted from the CD drive and reinstalled.

  only problem now is there is no graphics or sound card and no drivers for anything whatsoever. We had the case of the laptop stolen in the car months ago and most of the supporting documentation was there.

  can anyone tell me please what we need drivers?

  Thank you

  Post edited by: herewego

  You might be better off asking this question in the Satellite Pro section of this forum that you are more likely to attract the attention of other owners of M40 there. They would probably have disk tools and utilities with the real drivers and descriptions thereon.

• Dv6535tx HP Pavilion upgrade to Windows 7 notebook. What softpaqs are needed?

  Hi, I live in Australia & just got a laptop HP Pavilion dv6535tx of second hand on which the previous owner had installed Windows7 but no driver HP, so many things didn't work (e.g. fingerprint, Webcam reader), so I think that there will be others also. As a precaution, I have re-installed Windows7 - and the original HP recovery Partition is still intact, but I don't know if it is accessible.

  I couldn't find anything on this model (Nr GP329PA) on the web except the specs on the HP Andorra site! If a phone at HP representative said that it was purchased in Hong Kong & said HP did not support Win7 on this model and gave me a link for the Vista drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3457...

  Through this forum, I managed to find a few softpaqs that add some HP software (SupportAssistant, WirelessAssistant, RicohMediaCardReader, & Update) that works on Win7, but I need help to find Driver softpaqs.

  BTW: Here's a link to where maybe the softpaqs are located (by number only)

  FTP://FTP.HP.com/pub/SoftPaq/

  Unfortunately I can't find a single list of what is contained in it. Perhaps someone knows if it exists and where?

  So is there anyone who knows where I can find the softpaq numbers for:

  (1) the scanner software to make it work Win7 & digital loaded v3.4.3.78 pilot AuthenTec AES2501B but it doesn't seem to work.

  (2) the Webcam & microphone

  (3) IR

  (4) DVD Lightscribe burner

  (5) quick launch buttons

  Help on one of them would be much appreciated.

  Thank you, Robert

  • CyberLink YouCam software, sp56980
  • LightScribe System Software, sp46011
  • Quick Launch Button software, sp46731

• What resources are needed for ODSEE?

  ODSEE 11. I have a small environment, fewer than 100 users with 14 cases of Global multi-mode. I will create a Solaris 11.1 running ODSEE11g and DSCC and try to understand how much CPU / Cores, amount of memory, and the amount of HARD drive space I need. I was not able to find all the references for a configuration example to help me determine what I need to start with. My initial guess was 2 cores, 4 GB of ram and 50 GB of HARD drive. Someone at - there an example I can adapt to my environment?

  Thanks for the help.

  Hi Matt, the world is so small... that sometimes funny things ;-)

  The only 'problem' when dealing with deployments around the world is usually the network 'latency' between two sites "geographically dispersed", that can cause slowdowns of the replication protocol, but if the content of the directory server is essentially static (in the sense that you don't need to update frequently), you should be good.

  BTW, if you have a load very soft AUTH (and you can find these numbers by analyzing the daily logs of current systems), then "couture" another area small area or a LDOM on the T4s shouldn't be a big problem. There are also tools in DSRK (part of ODSEE) that allow you to build/simulate a workload to measure performance.

  Thank you

  Marco

  P.S.: Before closing a thread as answered, please check the correct and useful to help others find

• May not know what drivers are needed

  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  
  PCI\VEN_8086 & DEV_0084 & cc_028000
  
  PCI\VEN_8086 & DEV_0084 & cc0280
  
  These are the hardware id I need help because I'm only able to work with the mobile Internet until I can solve this problem. Thank you!

  Hello

  Please try the other one on the list:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19856

  Kind regards.

• How can I send a fax using pc? What improvements are needed by my O.S. (Vista Home Prem.64 bit quad) to allow the sending of a fax? Scanner/printer is installed.

  Using comcast for internet cable. Service not switched. Built in soft modem Agere Systems PCI-SV92 PP. Epson CX8400 printer / scanner installed. What additional software/hardware, or fax service subscription may I need? Any suggestion is appreciated. Thank you, Ken. Ken

  http://www.Microsoft.com/Windows/Windows-Vista/compare-editions/default.aspx

  As you can see from the link above of MS, Vista Home versions do not come with Fax software.

  Home Premium, you can only change it to Vista Ultimate, which has included Fax software.

  A less expensive way is to buy 3rd party software Fax: http://www.snapfiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• BlackBerry Smartphones looking reboot / battery pull App for BES / what permissions are needed?

  I tried to use again Me in my 9900, but is not compatible with BES. Not all the permissions the application, but it does not work. It just hangs. I asked the seller the necessary permissions, and they seem to be completely put out on this issue. They simply said of all the permissions must be enabled. On the right, as the computer SCIENCE Department will go for this.

  I don't mind paying for an app if it works and if I can get a clear indication of what permissions requires.

  If you use a reboot / battery traction app with BES, which do you use, and what is the permissions it requires?

  I just found out that ALT BACKSPACE of RIGHT SHIFT causes a reboot. Now, I have no need of a battery pull application.

• what drivers are needed

  I've changed hard drives after getting a notice of "imminent hard drive failure. I have back up DVD and also the recovery disks. Because my new hard is smaller than the original, the computer won't let me use my recovery disks; Therefore, I did an iso disc of micro soft as advised here on this forum earlier.

  When I tried to install this iso disc, I received a message to insert in another disc and install the necessary drivers before I could continue. Exactly what that drivers am I supposed to install and when I download it from? I saw the list of hp drivers listed in the list of update hp drivers. There were 20 or 30 of them with as much of 8 listed under one setting. Am I supposed to download it all on one disc?
  I don't understand this and really need a step by step instruction. Going on a couple of weeks trying to get this new hard drive and running.

  My computer is a pavilion laptop dv7 cl 4087 entertainment, 64 bit. Any help is appreciated.

  THX, Frank

  SUCCESS! I want to thank you Eric for all your advice and perseverance to stay with me and help out me.

  It was a corrupted download or a bad burn which was causing all my problems. I have re downloaded the w7 link this morning and it burned on another DVD. (It was easier for me because I'm still not entirely the download tool and how to use :-).) Anyway when I watched the disc and compared to each other, I knew right then that he would probably work. There is that much difference to what I could see on the drive.

  Windows is downloaded and place and running. But, apparently, the wifi driver (?) did not download. It has no WiFi on the network. I have searched for it and can not find. What should I do to install and connect via Wi - Fi. I am connected to internet via Ethernet (?) (yellow cable).

  Any help with this problem would be highly appreciated.

  Thank you, thank you, still

• For Inter-VM monitoring at work, what tools are need must be installed?

  Hello

  I read in Vsphere HA doc who, for the virtual machine, including monitoring at work, some Vmware tools must be installed.

  When you turn on tracking of the VM, the VM (using VMware Tools) monitoring service evaluates if each

  virtual machine in the cluster is running by looking for regular pulsations and i/o activity

  Can someone confirm what tools need to be installed?

  Thank you!

  Just VMware tools, it is a good practice anyway. Also keep in mind that in order for "Application Monitoring" works, you will need to download / install a separate package.

• What privileges are needed to create XMLIndex in the scheme of someone else?

  Hello
  
  I am logged in as 'system as sysdba' and try to create a XMLIndex in another scheme called 'eventschema '. The command fails with "ORA-01031: insufficient privileges". How is it, I can create a relational index in eventschema, but not a XMLIndex? What a privilege system or eventschema must? I gave UNLIMITED_TABLESPACE to eventschema already, but that has not solved the problem.
  

  SQL> show user
  USER is "SYS"
  SQL> describe eventschema.event;
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   EVENT_ID                                  NOT NULL NUMBER(20)
   EVENT_UUID                                         VARCHAR2(50)
   RECORDTIME                                         TIMESTAMP(9)
   EVENTTIME                                          TIMESTAMP(9)
   EVENTXMLTEXT                              NOT NULL XMLTYPE STORAGE BINARY
   PARENTID                                           VARCHAR2(100)
   DOCUMENT_ID                               NOT NULL NUMBER(20)
  
  SQL> CREATE INDEX eventschema.idx ON eventschema.event(parentid);
  
  Index created.
  
  SQL> CREATE INDEX EVENTSCHEMA.eventXml1 ON EVENTSCHEMA.EVENT (EVENTXMLTEXT)
  INDEXTYPE IS XDB.XMLIndex
  PARAMETERS (
   'XMLTable eventXmlTable ''/ObjectEvent''
      COLUMNS action VARCHAR(15) PATH ''action'' 
   ');  2    3    4    5    6  
  CREATE INDEX EVENTSCHEMA.eventXml1 ON EVENTSCHEMA.EVENT (EVENTXMLTEXT)
  *
  ERROR at line 1:
  ORA-29958: fatal error occurred in the execution of ODCIINDEXCREATE routine
  ORA-01031: insufficient privileges

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Any help is appreciated!
  
  Thank you!
  -Daniela

  Just to be clear schema account EVENTSCHEMA is missing from the privileges, not the account that is running (like the conn / as sysdba proven)

  Start first with

  grant create any directory, drop any directory, connect, resource, alter session, create view to EVENTSCHEMA identified by {password}
  

  Published by: Marco Gralike, July 16, 2011 16:55

• Satellite M40-230: what cables are needed to connect to the TV

  Hello

  I went to PC World, where I bought my M40 and asked them for cables to connect to my TV using the s-video connection on the back of my laptop.

  They said that this was not possible because S-video does not sound.

  Does this mean that I have to get a separate cable for audio to use via the speaker/headphone jack?

  Please let know us that it is a little confusing.

  Thank you, George.

  Hello

  As far as I know it of possible to connect the laptop to the TV with an s-video cable.
  The dealer is right, but there are different s-video cables.

  You can use one with s-video on one end Jack and taken 3 RCA (2 audio and 1 video) on the other end of the cable. Or you use a SCART instead of the 3 Sockets.