Similar Questions

• I want to add another computer to my existing wireless network

  Ask the installer for my "SSID".  It's been so long that I first set up my network that I don't remember what I used.  How can I find out what my "SSID"?

  The "SSID" is the name of your wireless network. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to add a Mac to an existing network of Wrt160N

  I have a work network, set in place using a XP computer. I added the devices successfully wireless in the past. I am trying to add a Mac, but it asks a passwork. There is no password that I know in the wireless setup and didn't have to do it on an XP.

  I use WPA2_Personal security. I can connect correctly using a wired connection.

  Any ideas? I was told that it should be easy.

  Update: I found the password that I was telling him typing was not well done. As soon as I touched him "show password" I could see that it wasn't the right plugs.

  Problem solved.

• Impossible to change the network name to an existing network

  During a recent upgrade of windows 7 to 10 the procedure at about 80% and froze with the error 8007002C - 4000D. Windows 10 not able to complete its update, the system proceeded to reinstall windows 7. Once this is finished, I found that he had lost access to internet, ipconfig address had been changed and a new unidentified network had been set up, which I'm unable to edit or delete. After spending 2 days trying to get this PC to normal with 7. I tried the 10 upgrade again, but with the same result. I can't figure out how to get my PC to Windows 7 because I don't know how I've changed the name of the network in the first problem.

  To explain my network configuration of the PC with the problem Desktop which is Ethernet is connected to a router with 3 laptops wireless and a wireless printer. Laptop computer and printer seem to work fine, and the Office can see these devices but cannot connect to the internet or a network.

  I fixed the IP address of the desktop computer and tried everything I can think but cannot add this PC to your existing network.

  Why Windows 10 cause this problem that I'm not sure, but my main concern right now is to get this PC to its previous state.

  You would be extremely grateful if anyone could offer some advice.

  Thank you

  Fortunately, I managed to solve the above problem.

  After contacting my antivirus software company to find out if one of their customers had the same problem and the reception not good answers. I found another forum that advised people to uninstall the antivirus software and disconnect all external devices such as hard drives external, printers etc.

  After following these tips Windows 10 downloaded and installed without any problems.

  Hope this helps other people with the same problems.

  Thank you

• connect a wireless laptop to a local network

  I want to connect a laptop wirelessly to a local network existing. 2 desktps currently form the local network and are hard cable to the router is connected to a comcast modem to connect to the internet wired/wirelessrouter... the laptop uses the wired router / wireless access to the internet. I want to add the laptop to the LAN. How can I do this?  TKS doug

  Hi Doug,.

  You can read the following article and see if it helps.

  Setting up a wireless network

  Hope this information is useful.

• How do I add another to: name a template

  I want to add another recipient to an existing model.

  Double-click it to open it again message based on the model. Add the new name, use file | Register under to save it as a template.

  You have now two models; You can delete the other oldest if you have no other use for it.

• How can I configure a new TimeCapsule for an existing network without having to activate the internal networks?

  I tried to go in advance and choose "Add TimeCapsule to the existing network", but it keeps defaulting to 'add a new network '.

  without having to activate the internal networks?

  "Add TimeCapsule to the existing network.

  You cannot add a TC in an existing network, if there is.

  You must configure the TC for the network.

  It keeps default back to "add a new network.

  So, it's OK... The TC is part of an existing network or makes a new.

  You must connect to the TC network... either wireless or ethernet.

  However, you can manually configure the TC simply plug ethernet for example.

  See, cable using Time Capsule for Mac for backup only.

  The same can be done for the wireless... but a TC is really the bad device for backups if you don't have a network... It's cheaper, faster and more reliable by using a USB key.

• How can I add a password to an existing network of the time capsule?

  How can I add a password to an existing network of the time capsule?

  I guess you mean that time Capsule has already been configured to provide a signal of wireless network, correct?

  Do you mean that the network has no password at all right now... or... do you mean that the network has an existing password, but you want to change the password?

  What operating system are you using on the iMac that you list in your profile?

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• Windows 7 Mobility Center cannot turn wireless on. This typing of same good wireless network on another laptop.

  I see is no longer the wireless network off the laptop.
  Wireless network is good because I use another laptop with good signal just next door.
  Looking at the display of windows Mobility Center, I can see the wireless network window that says wireless off but the turn wireless on button is grayed out so I can't click on it. I suspect the driver needs to be recharged, but don't know where to find. Any help?

  Thanks for your reply. I couldn't find a physical switch anywhere so I uninstalled/reinstalled the driver RF by the troubleshooting Web site emachines. Everything is good...

• You need to add a 3rd WAP to existing small business network. Where I start?

  The network has 26 ports Cisco switch and 2 existing WAPs, 1 of which is an air 1040, and the other I'm not sure but it resembles that of other.  I need to add a 3rd WAP for a small room.  I was going to use an other cisco 1040 air, but I don't know where to start.  There is a smaller, lighter WAP that works?  I have no experience in network configuration, so I'd like something simple.  Help, please.

  Thank you

  Laura

  Hello Laura

  My name is Eric Moyers, one of the Experts I wireless in the Small Business Support Center.

  Normally, I tell customer to add products similar to their outgoing network when they're trying to develop it. This prevents the learning curves to a minimum and help in getting enlargement and running faster. However, there are time going with brand new products are better, especially if you are trying to integrate the best technologies.

  The Aironet 1040 currently being End of Life / end of sale. You would need to look for a different model.

  He stay with the Enterprise Access Points level, the AIR 1602 has the same capabilitoes as the 104 you're too used. Price range is 300 above low 400 according to one where you look.

  If you want to look at small businesses, we have the WAP561 which is also dual Radio and should do everything the 1040 can or you can look at the WAP371 that is double also but includes a radio that can make the new signal "AC". These two serve 200 upper middle 200 depending on where you look. By the way that they look almost identical to the AIR1040 as well.

  I hope this can help you started, please let me know if I can answer anythin else or go deeper.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note useful messages and let others know when your Question has been answered

  You can click on my name next to the image if you want to email me directly

• My laptop is a Dell Vostro 1720 of 32 bits, and so I accept I can't upgrade my Muse more away, but which has hosted a site for me, what should I do to add another site?

  My laptop is a Dell Vostro 1720 of 32 bits, and so I accept I can't upgrade my Muse more away, but which has hosted a site for me, what should I do to add another site?

  Hello

  What I understand, that is, you already have a free site hosted with Adobe Business catalyst, and now you want to get a more.

  To do so, publish a Muse Adobe Business catalyst site.

  Access to the administration panel and go to settings-> Site Management site, you should see the upgrade option, you will pay for the site, because it is not a free site.

  Let me know if you have any questions, or if I have missed something

• Connect TM wireless to an existing network

  I want to connect my TM 2 to my net existing as a wireless client. My main router is not an Appleproduct but must stay as it is. My plan is to use TM connect my Synologi NAS with cable in room separat so I can have my TM and SIN away from my main router. I do not understand how to do this. So please help

  The needs of the time Capsule to connect to a modem or a modem/router to the assistance of a permanent, wired cables Ethernet... just like the printed Installation Guide illustrates.

  

  The only exception to this basic configuration would be if you have another router Apple producing wireless network, in which case the time Capsule could "extend" this network wireless.

  If you are ready to add an AirPort Express, it could be possible to configure the AirPort Express to pick up the signal from your router wireless and the 'join' the network in this way. Then, it would be possible to have the Express send an Ethernet signal to the time Capsule . A configuration that is unusual to say the least.

  Note that I used the word "peut" here twice. There is no guarantee that this type of configuration would work well for you.

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.

• Cannot add XP Pro Machine to the network current (mixed OS)

  I was asked to add a laptop running XP Pro SP3 to a current network without wire/LAN:

  1. XP Pro SP3
  2. XP Pro SP3
  3. W7 Ultimate
  4. W7 Ultimate laptop
  5. W7 Ultimate laptop
  6. Laptop XP Home SP 2
  7. Laptop OSX 10.6
  8. Laptop XP Pro SP3 - it's the stubborn. It connects to the router to allow access to the internet and LAN connected printer. However, it will connect on the other computers on the network.

  Each of these computers connected to the network with ease and can meet without any problem. All laptops to connect wireless, else connect via LAN.

  They share all 3 printers - directly via a LAN port, two others through the proposed shared PC, they are connected to.

  The last Windows laptop that I have connected was XP Home, and it immediately connected to the network, once the router password has been entered.

  I tried everything, even to copy the settings from XP Pro SP3 desktop machines - still no joy. I'm obviously something wrong, or missing something, but have no idea what.

  Someone at - it had a similar problem - I searched online and have not been able to find anything remotely resembling this, and the Support of MS site was not helpful either.

  The only things I can think of are:

  1. the awkward computer there another firewall or antivirus installed?

  2. you disabled Simple file sharing in Folder Options > view tab > advanced settings at the end?