I am doing an assignment of packet trace, but my computer will not open

Similar Questions

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• Updated FireFox, restarted and now it will not open the browser, even if the icon does not appear in my taskbar. Was fine until the update last night. Win8.1 running

  When I move the mouse over the icon in the taskbar that appears after that I have I dbl-clicked on the icon on the desktop, you can see a miniature version of the browser open as usual, unfortunately, the browser will not open upward on the desktop. I've deleted and reinstalled several times. It has worked very well until I did the update last night.

  Machine features:
  8.1 to win
  16 GB of RAM
  3 video concerts
  Processor AMD FX-6200 6 3.80 Ghz
  64 bit

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or perhaps 8.x for Windows search of charms bar bar?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Firefox does not. Have done all troubleshooting but still does not. It will not open again now. Help please.

  After all the troubleshooting suggestions and also uninstall and reinstall Firefox, it won't always work. First it fades and a "does not" review appeared on the letterhead, with the pointer regarding the timer but nothing did. He was recently working fine for ages and I have not added anything, or deleted, so does not understand why he should stop suddenly work.
  I followed all the troubleshooting tips and disabled the plug ins, also removed a lot of the add - ons, did not always work. Then I uninstalled and re-installed.
  Now, it will still not open. A window pops up saying: he's fallen down and giving me the opportunity to re - start or leave. If I click on start, it only re - start.
  I even started it in SafeMode but which will not open either, it opens for about a minute then just closes.
  Please help, I really want to use any other search engine.

  If you have submitted reports of incidents, so thanks for posting the ID of one or more reports of recent incidents that have a prefix 'bp ':

  • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

  You can find the ID of the status of recent reports of error on the page "help > troubleshooting information" (topic: support).

  • Click on the "All incident reports" button on this page to open the Subject: hangs page and see all incident reports.

  If necessary, you can open on: pages through the address bar.

  See:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter
  • https://support.Mozilla.org/KB/Mozilla+Crash+Reporter

  If you cannot open Firefox, see:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
  • https://developer.Mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

• What does the error code 80240016? my computer will not install updates

  What does the error code 80240016? my computer will not install updates!

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Photoshop 2015.5. PS does not update and will not open. Missing 4 dll files.

  Photoshop CC (2015.5). PS does not update and will not open. Missing 4 dll files.

  VulcanControl, VulcanMessage5, tbb and ScCore. PS worked fine earlier today and has worked great for over a year.

  Windows 7 update to 10 eight months ago.

  Exit code: 184

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 1 warning (s)

  FATAL: Error (Code = 184) running the 'MoveFileCommand' command for package: 'AdobePhotoshop17-Core_x64', version: 17.0.1.159

  FATAL: An error has occurred in the installation of the package (name: AdobePhotoshop17-Core_x64 Version: 17.0.1.159). Error code: "184".

  WARN: Cannot move the card to the address 'C:\adobeTemp\ETRD35C.tmp\1\Application\Required\DynamicLinkMediaServer\32\libmmd.dll' to 'C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\DynamicLinkMediaServer\32\libmmd.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify.

  Hey gene,.

  Thanks for getting back to me. I uninstalled and re-installed PS and everything seems to work very well. Put same Lightroom update. Not sure what the problem was.

  Thank you

  Clay

• I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either.

  I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either. I tried to delete the preferences.agprefs file, did not help. Lightroom 4 runs normally. I use Windows 8.1

  They said that nothing happens when they begin to LR.  It is a symptom that began with LR 5.5 or whatever the first version which was installed after that, where for me deletion of content but do not delete the folder SLCache, itself, is what worked for me:

  Different things to try are listed here, where the Solution 4 is what worked for me:

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

• Adobe does not recognize that I uninstalled CS on the old computer, will not let me turn on the new computer

  Adobe does not recognize that I uninstalled CS on my old computer, will not let me activate it on the new computer.

  Yes, uninstall is not the same as disabling. Call support to reset the activations.

  Mylenium

• Firwfox new version 12 does not download on Mac. will not open... etcetcetc

  Tried several times... they also don't have any ruined tech support.
  Followied invite you to download... does not open etcetc...

  UPDATE: * Corel - got it to work! I open the dmg file to preview... and it worked... did all the things you mentioned
  Thank you very much.

• Windows Update does not open, no message error, just will not open.

  New and wonderful things abound, I can't open windows update at all (running Windows Vista Home Premium). It shows that I have an update available with the icon in the toolbar, but it does not open, also cannot open it via the control panel. I went to safe MODE and tried unsuccessfully there, Defendor Windows can't find anything extraordinary, SPY-BOT Search and Destroy finds nothing AVAST can't find anything interesting (last full scan) 26/06/2011. I am now at a total loss. Any help would be greatly appreciated

  Hi dancingbear.

  1 did you change on your computer before the show?

  Perform the following troubleshooting methods.

  Method: 1

  Configure the computer to start in minimum mode and then try to install the updates manually at boot.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  You can download updates manually from the following link.

  Install Windows updates

  Method: 2

  Also I suggest that reset you the windows update components.

  How to reset the Windows Update components?

• PC does not normally, will not open in Mode without failure. 124 Blue error screen.

  Hope you can help, I'm pulling my hair out here.

  Yesterday, my PC crashed and eventually would not load normally. When load it goes into a loop where he would try and fix the mistake (he could not), and then try a restore point, that will fix it either. In addition, the screen is highly pixelated on each screen, including the start of Packard Bell at the beginning screen.

  Randomly, when I booted up my PC today, it went in the tool to restart system and restarted the PC, and it started properly - no pixelations. It lasted for 5-10 min, then crashed again. After restarting, it returned to the same problems as above, pixelated screen and does not start in normal mode, Safe Mode only.

  I get the error code is below. I can locate the dump file, in that respect, but I don't know how open it to read (seems not that I have any program that can be read).

  Any help, advice, suggestions as to what I can do to solve this problem would be greatly appreciated!  Thank you

  Ian

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 124

  BCP1: 00000000

  BCP2: 886BD020

  BCP3: B2000040

  BCP4: 00000800

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini091310-01.dmp

  C:\Users\Ian\AppData\Local\Temp\WER-343077-0.SysData.XML

  C:\Users\Ian\AppData\Local\Temp\WER41D0.tmp.version.txt

  Hello

  Have you run BlueScreenView to see the Bug_Checks yourself? Very revealing.

  You run both BitDefender and AVG. Have two major antivirus on the same system,
  much less enforcement, certainly do not. Even those who are disabled and some uninstalled, will be
  load the pieces themselves into memory. Remains of those uninstalled can do the same thing.
  Uninstall AVG and BitDefender to help to uninstall, and then run the removal of their creator tools
  so that no remains are left behind. AVG is known to have caused strange problems. See
  below to get recommendations for use during the test, even better would be permanently.

  Just realized you also use what is called RadialPoint, and it's another antivirus.
  on top of those security program above - you must abandon it as well.

  When you load all programs antivirus/security of two or several you really decrease their and.
  effectiveness and thus your security. And resulting then all sorts of weird errors.

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  =======================================================

  You also load Adaware at startup and it sometimes causes also some questions so I
  would be to uninstall it. If you use the above recommendations you will not need, nor likely
  benefit of Adaware running in resident mode.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Update of Lightroom 6.5 is useless! Will not open requires permission changes and still does not start!

  Updated to 6.5 and it does not open!

  Changes in sad authorization required but when do just shows the same problem.

  Basically does Lightroom non-ouvrantes!

  No support at all on the website!

  Hi corywright,

  Please change the permissions for the sub files adobe specifically.

  1. / Library/Application Support/Adobe
  2. ~/Library/application support/Adobe

  Reference: OS X El Capitan: set permissions for items on your Mac

  If the steps above did not help, then I suggest to uninstall Lightroom 6.5, restart the machine and install Lightroom 6 and then install the updated to 6.4.

  DOWNLOAD: install Photoshop Lightroom

  Updated link: http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeLightroom-6.0/6.4/setup.dmg

  Kind regards

  Mohit

• Photoshop does not read the RAW of Nikon D4s images... they will not open

  How to get photoshop to open the RAW of Nikon D4s

  Hello

  Use 6.7RC.

  6.6, as you have discovered, does not support the D4 that this unit was not released when ACR 6.6 came out.

  Could not open the NEF in Nikon D4 files - same mistake

  Hope this works

  Raoni Ortolan - Buffet Infantil

  http://www.topbuffets.com.br

• Does not / will not open, I tried safe mode, rest and unintstalling and restalling; again does not help.

  Two days ago, that I closed firefox and my computer is shut down. A few hours later I tried on firefox and it didn't do anything so I had to force it quit. I tried several times to return nothing doesn't. I tried to reset firefox which did not work. I tried to start in safe mode, which brought at least a window as he went to work, but he did give me the thorny ball for about an hour. I tried to uninstall and reinstall. I even went through my computer everything and deleted everything related to firefox (including caches) restart my computer and reinstall firefox and restart my computer again. I can never even a window pop up, unless I use safe mode (but which freezes and does not even load a page)... All I get is "the application is not responding. The only thing I could think (because it's the only thing I did my browser) is only a day or two before that I closed firefox, I had to take a survey for a job that required me to check the box "delete history when firefox closes." I forgot to change it until I closed the browser, and I can't go back to the preferences to change it because it does not.

  Then the profile was infact deleted somehow, article that I posted before should help you make a new.

  SEE here.