I am trying to install an hp 26 series printer and can't keep themselves hardware found message Setup then tells me it cannot locate the software

Similar Questions

• Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

  Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
  Don't know what to do.
  Are there out there can HELP?

  Please, I beg you!

  Thank you

  Hello

  Would you please ask the same questions more then once in these Forums.

  What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

  Other questions, it seems you have an HP computer.

  Here is the information of HP for Vista from recovery to factory settings:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
  

  NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
  Use the recovery discs to restore the PC by following the steps below.
  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. etc.

  If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

  Details of HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  You can also try the Forums from the HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• Try to install solidworks 2011 on my laptop and it always gives me an error message: internal error. Have not run the Windows Installer service for this product as expected element: InstallExecut

  Error installing program on Windows 7 64 b

  Hello everyone, im trying to install solidworks 2011 on my laptop and it still gives me an error message saying "error interno. Without to ejecuto el servicio Windows Installer para este producto componente como is esperaba: InstallExecut "(sorry for the Spaniards, that solidworks is in Spanish). What can I do to fix this? I searched a lot of google to fix it but I couldn't yet. Thank you!

  my laptop has windows7 64B

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  --------------------

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  -------------------

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• I installed Adobe Acrobat 9.0 Pro on a pc that crashes. I tried to install it on my new PC, but I get an invalid serial number message. I don't understand because he works on the old PC. Help!

  having installed Adobe Acrobat 9.0 Pro on a pc that crashes. I tried to install it on my new PC, but I get an invalid serial number message. I don't understand because he works on the old PC. Help!

  Hello

  Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena

• I bought a new laptop and I am trying to install Adobe Acrobat Pro 11, but I can't find a download.  Where is he?

  I bought a new laptop and I am trying to install Adobe Acrobat Pro 11, but I can't find a download.  Where is he?

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• Trying to install creative cloud, stops at halfway and gives me error Code: 1.

  Trying to install creative cloud, stops at halfway and gives me "error Code: 1'." When I looked at what that means, it tells me to uninstall, then try again. There is nothing to uninstall. I disabled my firewall and disable all security software. Even went to the properties to UNLOCK program to settle, giving permissions to all. Even as an administrator. Even tried in safe mode, nothing. Same mistake NEVER ONE TIME! Then I downloaded Adobe Assistant I think that another program... It installs and shows that the installed programs, but what that leaves is a folder on the desktop with the name of 2 programs, but there is nothing for them.

  Using the Support Chat from Adobe is the ONLY way it worked! It just took about an hour. But I insisted for them to take over my computer. There was much too much that they had to do, open, and delete stuff. They had to download additional software to try to solve it. They had mistakes throughout, but now installed InDesign Creative Cloud AND. As I said, ask them to do it for you because it's worth against the endless hours, I tried to resolve the question of my own, search the forums, make suggestions, without success. Once I saw my program PASSES the bar of 42%, I knew that they fixed. They will still open the program to ensure that it properly installed. If you highlight the contact on the Adobe site, answer a few questions and then click on NEED of EXTRA HELP. Then connect to the chat. TOTALLY FREE! And you just sit back and watch everything they do, for about an hour. How long approximately it is. But they know what they're doing for sure. As I said, I tried all the available on websites, forums, chats and connect them directly to my computer support, IS THE ONLY THING THAT WORKED they are awesome if you get someone who knows what they're doing, unlike only one, that I had later in the night, which had no idea. I've disconnected and got another person, which sets the creative cloud. Now the rep just fixed and installed InDesign. Save yourself the extra stress as if I was, because I was so frustrated! They are awesome

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• cannot locate the file to install silverlight, windows 7 64 bit, c:\6f4c8317905ddd8e80bc5f1b238f5ea2\

  Every time it says I need to update however windows update fails, silverlight site stand alone fails to Setup. Say Windows cannot locate the file, or can't access the Setup program. I've tried everything I know including UN-installing and cannot locate the file.

  Hi Dstek,

  This could be due to installation damaged the existing version of Silverlight on the computer. So, must uninstall completely from the computer and then try to reinstall.

  I suggest you refer to the Microsoft KB Article below, try the troubleshooting steps in it and see if that solves the problem.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  Hope this solves the problem. Please get back to us with the result.

• After a small power surge (I installed a surge protector) my printer and his new cartridge dating back to one week only prints blank pages when I click on 'print '.

  After a small power surge (I installed a surge protector) my printer and its new cartridge dating a week began blabk pages to print

  Contact the technical support for the manfucaturer of the printer.

• I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  Try to install a Windows Vista driver if there is no native driver Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I tried to download PES 13 and everything I had, it was a folder called 'Package' which I still cannot access the post-secondary education program. I have a Compaq laptop with Windows 7. Help, please.

  I tried to download PES 13 and everything I had, it was a folder called 'Package' which I still cannot access the post-secondary education program. I have a Compaq laptop with Windows 7. Help, please.

  Make sure you download the windows files.

  You must download a 7z and an exe file.  put them both in the same directory and double-click on the exe file.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".