I am trying to print photos custom sizes

Similar Questions

• How can I get my hp officejet pro 8600 to print a custom size

  Hi, I just upgraded from the officejet pro 8500 to the officejet pro 8600, I try to print a piece of the custom paper size.  The size is 26.9 mm x 13.4 mm, I am on windows 7.

  The error is:-paper detected does not match format of paper or type selected.

  I had 4 printers officejet different over the years and never not been able to print a custom size, can someone please help with this one.

  Some printers are able to print custom formats real, but most made currently are not. It is because the printer must be able to recognize and 'confidence' settings which are entered. If a number was entered incorrectly, the printer can damage its internal components.

  This is especially true in this case, because the above dimensions are considerably smaller than anything that can be printed.

  My recommendation is to use a paper size appropriate to print materials and cut the large piece to the correct size.

  Let me know if it helps!

• I am trying to print photos and print-wash

  I am trying to print photos on photo paper on a HP Photosmart 7510 - C311a e-all-in-one printer and they print washed out. I changed on the new ink cartridges.

  I understand that you are having print quality problems. I would like to try this document.

• 6525 HP trying to print photos only from photo tray when I print from iPhone

  6525 HP trying to print photos only from photo tray when I feel of the iPhone. A4 paper loaded, but 6525 does not print on it and output the message "Insert photo paper." Can you help me?

  Hello

  The default settings on the devices Apple Airprint is printing photos from the photo tray and all other documents of the main paper tray.

  For more flexibility with regard to the selection of media and the status bar, please download the HP e-Pprint app. You will find the Setup instructions for e-Print here.

• ID CS5.5 Mac - transparency printing problems custom size 13 x 21

  I try to print a screen printing positive transparency. The document is 13 x 21. I have a roll of 13 extended transparency which I cut a 21 "piece. I print on an EPSON 1400.

  I can not get the output to this szie file. It cuts the image within 8.5 x 11 limit each time.

  I have:

  -set a custom size in the print dialog box

  -Click on Page Setup in the print dialog box and set the custom size here, ignoring the warning to the subject it is not not printing ID dialog box

  -l' Preview in the dialog box will look perfectly oriented to the right size in the small tile

  -J' have tried everything I can think of to try to get in sync and correct output formats

  -I went to the PDF to try, fail again

  Is there someone who can help with some step by step to a process that works?

  Adobe ID CS5.5, EPSON Stylus Photo 1400, Mac Lion 10.7.5

  Only, I can't understand how this could be so difficult and little intuitive. Any idea would be freaking wonderul.

  Wow! Sudden incidental finding on this incredibly frustrating issue.

  I had found information that the EPSON 1400 should be able to print 44 "long output by default. I was looking specifically for one to find people who had printed large and panoramic images and came across a photography website of the United Kingdom where a person mentioned that he had written a software that would allow this printer print beyond 44 ". That sounded a lot.

  BUT, the last post on the thread of a guy says how he was able to print up to 44 '' for an EPSON 1400 with ease. The solution, said, was that the WIDTH of the print in the page layout area must be LOWER at 13 ". Why? No explanation.

  So I reset my size custom at 12.5x21 inches and BAM! First attempt to InDesign printed successfully. I can work with the margin.

  Anyway, in the case that everyone runs into this problem, it works. Here is a link to the post of 2009 that mentions this as info about printing more than 44 ".

  This one is solved.

• Printing on custom size paper

  I just installed a HP OfficeJet Pro 8600 and tried to print a size of 4.5 x 6.5 inches. But this option is not in the list of available paper size, and I have no ability to create a custom size. After searching on Google, I found a thread here who recommended trying another driver. I did and was able to create a custom size. But when you try to print, the printer displays immediately "Cancel printing", and nothing happens (no error message on my computer or on the printer).

  I tried a few other drivers, but they do not work or the word ends up freezing when I try to enter in the printer preferences.

  Does anyone know of a driver that works on an OfficeJet Pro 8600 which also allows the definition of custom paper sizes? Or other good suggestions?

  Hello

  Please try to install the driver of HP Deskjet 6980 replacing and then try to print. Most of the time, this would not solve the issue.

  Kind regards

  Ronnie_N

• HP Laserjet 4200: cannot print envelopes custom size Laserjet 4200

  We have a HP Laserjet 4200 q2425A with a Q2438A envelope feeder. Booth impressions envelopes without problem in Word 2010, but I can't print a 8.25 x 6 custom size envelope.

  Hello

  The envelopes option Q2438A sandbox do not support custom paper size, it only support sizes standard envelope listed on page 185 of its user below guide:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=84028&docLocale=en_US&docid=emr_na-bpl12546

  A custom paper size envelope can only be printed from Tray 1, tray 2 or a tray of 500 sheets in option listed on page 62.

  Kind regards

  Shlomi

• I am trying to print photos to HP Photo Viewer and they won't print. I added my Sony photo printer! Help!

  I just can't get anything to print. They just continue to add up in the queue. Any suggestions? I added the printer, but still no luck!

  Hello Carolynnn,

  Please pass the Sony printer model. In addition, please verify that the most recent driver that is compatible with Windows Vista, provided by the manufacturer of the device is installed for the printer.

  For more information on the updating of a device driver, see the link below:

  Update hardware driver that is not working properly

  You can also try to start the Printing Troubleshooter in the link below and then check the issue.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Thank you

• How to print Photo Info in the custom printing package

  I use LR CC, the newer version on a Windows7 PC.

  I'm trying to print Photo Info in the custom printing package. I have no problem if you select Photo Info in the Style of single Image/Contact sheets available, but when I move the custom printing package, the news picture checkbox in the Page Panel, disappears. There is no reference to this in the manual to know why this should happen, or may not be available.

  Appreciate help any with this case.

  Best regards

  Steve

  Hello

  Take a look on: help Lightroom | Print the module layouts and models

  Only on the single Image and Contact layouts sheet can you "... to print information about the photos, such as the file name, title, caption and keywords..." »

• DeskJet 6988: prints without custom border deskjet 6988

  I want to make a card (5 x 7) which means I have to print 10 x 7. I tried to do a custom size by clicking on "without borders"but I still have the white border.» The option without borders works with no custom sizes?

  Hi @mhm45,

  Can I have found some information about you on your Deskjet 6988 borderless printing options.

  Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

  I think you're right, it should use an option without border defined by the operating system - but you can review the information provided in the user guide for printing without margins to see if you missed something. PG 59-61.

  This information has been in the User Guide for the Deskjet 6988;

   

  Print borderless photos

  Use printing without margins to print to the edges of some types of paper and printing on a variety of paper-paper photo sizes 3 x 5 inches to a custom photo size 210 x 594 mm (8.5 "x 23.4").

  Guidelines

  ● For high quality results, use a print cartridge photo in combination with the print cartridge three colors.

  ● do not print photos without a border in ink-backup mode. Always have two ink cartridges installed in the printer.

  ● Open the file in a program such as Adobe Photoshop or HP Photosmart software and affect the size of the photo. Make sure that the size matches that of the paper on which you want to print the photo.

  ● If you have installed the HP Photosmart software, you can use it to assemble panoramic digital photos before printing.

  ● For maximum strength, use HP Premium Photo paper.

  ● Check that the photo paper you are using is flat. For more information about the prevention of photo paper to curl, see photo paper storage instructions.

  ● Do not exceed the capacity of the tray in: 25 sheets of photo paper.

  Prepare to print

  To print a single small photo, use the photo/envelope feeder.

  To print several photos or more, follow these steps:

  1. check that the printer is turned on.

  2. for small photos, remove the output tray. For large photos, lift the sliding top. Remove all paper from the tray in. 3. drag the width of the paper all the way to the left guide and then pull out the paper length guide.

  4. check that the photo paper is flat.

  5. place the photo paper in the tray, with the side to be printed on the bottom. If you use paper photo with a detachable tab, check that the tab is so opposite of the printer.

  6. slide the paper guides against the paper.

  Note: Some formats of panoramic paper may extend beyond the edge of the In tray.

  7. for small photos, replace the output tray. For large photos, lower the output tray.

  Print

  Note: If the software includes a photo printing feature, follow the instructions that are provided with the software. Otherwise, follow these instructions.

  1. open the photo in an application that allows you to edit, such as the HP Photosmart or Adobe Photoshop software.

  2. open the printer properties dialog box.

  3. click on the shortcuts tab print Chapter 5 60 HP Deskjet 6980 series

  4. in what you want to do? drop-down list, click borderless Photo printing, and then select the following options:-print quality: normal or best. Note for maximum dpi quality, go to the paper/quality tab and then click Maximum dpi in the drop-down list print quality. -Paper Type: A picture appropriate paper type - size of paper: a paper size appropriate photo without margin - Orientation: Portrait or landscape

  5. set the HP Real Life technologies.

  6. click OK to print the photo. If you have printed on paper with a detachable tab, remove the tab to make the document completely without borders.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Photosmart 7510 want to print photos off smart phone on photo paper but ends by printing on a4

  Photosmart 7510, I want to print pictures on my smart phone, when I tried always printed on A4 plain paper even if there is no photo paper in the photo paper tray, im obviously something wrong or missed something.

  I understand you are trying to print photos on photo paper. If you use a device the Hp ePrint home and Biz app android and iPhone download Hp ePrint app download. With the application after you have selected the photo, you can go into the settings and select paper size.

  Let me know if it helps.

• Photosmart 6520e: print photos from the photo tray

  HP Photosmart 6520e - when I try to print photos from the tray photo here is what is happening. I empty the 8 1/2 X 11 (big) paper tray pull the photo tray properly load 4 X 6 photo paper and close the guides for focus media. Push the tray (s). When I try to print, I get the message that it is paper. EVERY TIME!

  If I load photo paper in the paper tray size, Center it with the guides and close the bins it will now display the peak (s). But it won't print from the photo tray, said always with paper. Prints only from the main paper tray. What's wrong?

  Thank you

  Hello @barnstormer37,

  I would like to help you today with the message 'in paper' that you get on your Photosmart HP 6520 e-all-in-one printer when trying to print photos from your Windows Vista computer to the photo tray. I understand that you are able to print from the main tray end, and you load properly all of your photo paper in the photo tray. At this point, it does not sound like a configuration problem on the computer. You usually have to "say" what paper tray it will be the power to the printer through your print dialog box. If the tray is always set to the main desktop tray when you want to print from the photo tray this will result in a "paper" message like your printer "think" it is supposed to print from your main tray empty. Please follow the steps below to make sure everything is set as it is supposed to be.

  For your reference I'll start providing you with the "loading paper" documentation for your product. This documentation is also useful if you decide to print envelopes as well.

  Loading paper and envelopes for HP Deskjet Ink Advantage 6520 6520 Photosmart e-All-in-One Printer Series

  Once your photo paper is loaded, I'll make you do a test print to your printer from the photo tray. Because each program is slightly different when it comes to printing, I'll start by providing you with the steps to print correctly in the Windows Photo Gallery program as it is specific to photo printing.

  1. Windows Photo Gallery by clicking the Start button
  2. Click on all programs
  3. Select Windows Photo Gallery
  4. When Windows Photo Gallery opens, choose the image you want to print
  5. On the toolbar click print, and then click print again
  6. In the print pictures dialog box, select the printer, paper size, print quality, print system, and number of copies to print.
  7. Click on the Options at the bottom right for additional print options. Ensure that the paper tray is set to the Photo tray.

  Once the adjustment options and the plateau have been confirmed as being correct, please try to print.

  Please let me know if the steps I have provided resolve your printing problem. Should receive you 'in paper' messages in another program, please let me know which program you are printing from. Good luck!

• Do not print to actual size

  Hello

  I am brand new to any program of Photoshop and I try to design in items 10, which came with a printer that I bought recently.

  I created a new file and set it with a white background, 300 pixels/inch (default?) and to 10.625 inches width and 7,375 inches in height.

  When working, I activate the leaders and indeed, the file's dimensions below on it. However, when I go to print and select this option to print the actual size, it always comes out of the printer to 10.25 inches wide. The height is always very well, exactly as I've specified it. But the width is always too short by the same amount. I tried to print a custom instead of actual size size and then set the dimensions custom my W and h. even result desired. The height is very good, the width is 10.25 inches.

  As I have indicated, I am new to all this! I don't know there must be that no easy fix... something that I don't understand. Help, please!

  A few more details, just in case it is important, I use a MacBook Pro OS X 10.6.8 and the printer is an Epson Artisan 1430. Printer drivers should be completely up to date, as I just went through all that the phone with them last weekend when the Epson had trouble communicating with the MacBook Pro.

  Thanks in advance for any help!

  -Fisheye

  EDIT: I have even increased the size of the project under the image > resize for a total of 11 inches. It will always print only 10.25 inches.

  If your printer can print without borders at that size? The printer may need this space for rollers for paper, the width is so short.

• HP Envy 7640: Printing photos

  I am trying to print photos using the main tray with plain paper and it will not be printed.  He tells me to load paper into the photo tray.  I've tried which as well and it still does not.  But I want to print from the main tray.

  Hi @TRG8,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 7640 e-all-in-one printer with a Windows XP computer and you were trying to print photos from the main tray on plain paper, but the software tells you to load paper into the photo tray, which you did, but it still does not work. I would like to help with that.

  It looks like a problem of printer settings as perhaps you do not have the main tray selected as the input source, but try to download and run the HP print and Scan Doctor to see if everything is OK with the drivers and the software of the printer.

  If the HP print and Scan Doctor detects no problem, it is perhaps a matter of settings. Here is a document of support that can help ensure the setting of the impression are set the way you need them - Print Photos. On the Paper Type/quality tab, that you want to make sure that the main tray is selected as the Paper Source, or Photo tray if you want to print on photo paper.

  Please let me know if that solves the problem, or if you need assistance.

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.